Jump to content
SAU Community

Recommended Posts

I have the hks 2835 pro s turbo on my car. Happy enough with the power. Most I've had it at is 267kw @ 15psi. Didnt want to strain the turbo too much after blowing my last one. Happy with the power and the lag.

Also as far as im aware hks have now brought out the 2835 kai turbo, which I believe is an improvement on the pro s. If you really want the 3076r I'd talk to Mick as well, as he is running it on his 25.

edit: one of the reasons I went with the hks turbo, was apart from the heatshield it pretty much looks factory, and is a direct bolt on.

  • Replies 100
  • Created
  • Last Reply

Top Posters In This Topic

Given Kris' claimed results on an internal, and the mention of police attention (I haven't been looked at twice by cops since I bought the car....first 5 or so months it had 5% tint all round so go figure) I'm leaning towards internal a little more at this stage, depending on just how much more external will end up being.

v66 still runs wasted spark I believe....unless I missed the part where they changed it. It's just the v44 but plug-in

EDIT: you said injector not ignition, my bad.

Edited by Trozzle

having made a boo-boo and ordered an EXTERNAL pump, not INTERNAL like I thought (bloody hell 040 and 044 look the same at a glance hey...) I'm now going to be receiving something I can't necessarily use all too easily. Can anyone point me in the direction of info regarding what's needed to use an external pump in place of an internal one? Might as well go with my f**kup now and use it, if it can be without too much trouble...

This is what you want...Bargain

Garrett gt3540 / gt35r bolt on turbo kit.. $2100 ono

.70 front, .82 rear, great condition - looks brand new, no smoke or oil residue anywhere, minimal/negligible shaft play

Includes Highmount manifold, 3" dump/front pipe & o2 sensor, braided oil feed line, water lines & fittings, external wastegate w/ screamer, stainless intake pipe to AFM, hose clamps & reducers, everything in the pictures! Can ship it anywhere in Oz

http://www.skylinesaustralia.com/forums/Wr...ts-t328761.html

Hey krayzie he could get that but the lag is just too bad on a 3540, i was considering upgrading my turbo to that but everyone kept saying its not that good for street due to the lag. There is a reason why many people say that the 3076R is the best turbo for the rb25 for street.

Heres my dyno sheet for my claimed power.

post-8025-1279177133_thumb.jpg

having made a boo-boo and ordered an EXTERNAL pump, not INTERNAL like I thought (bloody hell 040 and 044 look the same at a glance hey...) I'm now going to be receiving something I can't necessarily use all too easily. Can anyone point me in the direction of info regarding what's needed to use an external pump in place of an internal one? Might as well go with my f**kup now and use it, if it can be without too much trouble...

Im sure you will be able to get it to fit internally, just might need to customize the bracket to where its mounted too.

044 on factory rail

post-a295315-DSCF2644-.jpg

sweet, yeah I read into it quickly now that I'm home, and it can be mounted internally....just with modification to the bracket. That's ok with me lol.

And thanks for the dyno sheet man, makes me happy to see that work so well with internal gate etc

I'm not even after top end too much anyway, so a small drop up the top doesn't phase me. I realise that since I'm not after top end, that means I'm after response and pull...which is better with an external gate anyway :( either way, can't wait Kris I know I'll love it :D once I sort out how you have to mod this bracket for the 044 >.>

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So....to find any R chassis part number, get your VIN (will be something like ER33-xxxxxx for you) and go to: https://www.amayama.com/en/genuine-catalogs/nissan and enter it. From there you have access to a web version of Nissan's part system, FAST. It is a bit tricky to get used to, so maybe have a shot and post up what you think.  You can also search by general model but note in some cases your car might have different options so VIN is safest.  On diagram 211 I got 14075-75T16 for Connector, Water Hose If I search for part 14053‑21U10 that you posted, that is also a water hose but not the one bolted to the plenum and 14075‑04U00 is the fitting where the water hose goes into the block.
    • Yeah now we are talking I much prefer coolers in the front middle because it lessens the chance of a small bump to a corner stopping the whole event. I was thinking the AT cooler can move out of the radiator, delete the AT/engine coolant interwarmer and mount a separate cooler with a thermoswitch somewhere further back as is common in racing, that would be one thing. Beyond that, the engine oil cooler is an obvious one to move to the wheel arch, potentially one on each side, but unused space is an issue. I did have a earlier pic with the bumper off but it doesn't show how busy the corners are: DS is full of the auto driving sensors and PS is totally fully of windscreen washer fluid reservoir But ultimately I was hoping to keep the AC, and the water/air heat exchanger is fundamental so it is not just the radiator that needs to be in front BTW here's airflow to the rad as it ran at the track (one horn is gone now and I'll remove the lights next time):
    • your right the maps for Australia came out in 2017 but are 2010 maps. i got the updated maps SD card put it in and it was the same. Same maps in my Brothers Nissan Patrol. 2020 i think his car is
    • Yeahhhh, the costs have killed me. Spent more than the cost of an engine rebuild and it most mostly servicing and a tune lol.
×
×
  • Create New...