Jump to content
SAU Community

Recommended Posts

Hi all,

I have a R33 GTS25t with a GT-RS. I'm not sure what the issue is, but the turbo whistle is too loud. It basically sounds like its spooling, but happens at very very gentle throttle angles. Pretty much just off idle it starts, cruising at 110km/h its a constant whistle (i.e. really, really annoying).

Does anyone have any experience with this turbo? My mechanic suggested it was because I used to have a foam filter on which does not block any noise, however I changed it to a K&N item and it's only slightly quieter.

Other things I have pondered include the BOV leaking (its a standard item) and some sort of resonance in the intake piping. The second option doesnt really make sense though as the whistle happens all the way through the rev range. I'm just hoping its not a problem with the actual turbo.

It is getting tuned on Wednesday and that is one of the things my mechanic is checking, just wondering if anyone's been through this already...

Link to comment
https://www.sau.com.au/forums/topic/329559-turbo-whistle/
Share on other sites

seriously how can u not like the sound of a turbo spooling!!

yes the standard airbox will shut it up

and i remember SKYRYAN (from perth) in his forsale section a lil while back said he had a gt-rs and said its f**king loud, theres nothing wrong mechaniclly with it, thats just how those turbos are - fkn loud. throw him a pm might be able to help ya out

Link to comment
https://www.sau.com.au/forums/topic/329559-turbo-whistle/#findComment-5354900
Share on other sites

pretty sure u got a few grub screws in the front housing that holds the port shrouded cover in place... remove it and ur whistle will disapear..

i was running a gt3076r port shroud and i got over the whistle after a few weeks... only decent whistle is a hks t51r or t04z on 30psi bahah :D

Link to comment
https://www.sau.com.au/forums/topic/329559-turbo-whistle/#findComment-5355058
Share on other sites

any amount of opening the throttle will make it whistle away with a pod filter, like a mack truck

go back to the std airbox to shit it up and keep it quiet

Yeah, that might be the go. Pretty keen to keep it looking as stock as possible under the engine bay so that would tie in nicely.

seriously how can u not like the sound of a turbo spooling!!

yes the standard airbox will shut it up

and i remember SKYRYAN (from perth) in his forsale section a lil while back said he had a gt-rs and said its f**king loud, theres nothing wrong mechaniclly with it, thats just how those turbos are - fkn loud. throw him a pm might be able to help ya out

Its a bit anti social.. and plus I don't think the po po would appreciate it. Plus, its reaaaaally annoying on long drives. Acceleration spool is cool, yes. Constant drone, no.

If you get a Buzzz ..z zzz z.zzz sort of bearing noise on vehicle power off. It could be bearing noise. Which means they needs replacing.

Nah no noises like that to report..

Excuse my ignorance, but what is a port shrouded comp cover, what are its benefits and will it do anything if I remove it?

Edited by SoFreshSoClean
Link to comment
https://www.sau.com.au/forums/topic/329559-turbo-whistle/#findComment-5355235
Share on other sites

You wuill see on most larger sclae turbo the inlet has little holes or a lip in it. It is there to stop or help reduce compressor surge.

Due to the amount of boost these turbos run it help created a bit of turbulence and the air running over these "holes" is what is creating your whistle.

I am sure there is more to it, but that is my limited knowledge.

Link to comment
https://www.sau.com.au/forums/topic/329559-turbo-whistle/#findComment-5355394
Share on other sites

Hi all,

I have a R33 GTS25t with a GT-RS. I'm not sure what the issue is, but the turbo whistle is too loud. It basically sounds like its spooling, but happens at very very gentle throttle angles. Pretty much just off idle it starts, cruising at 110km/h its a constant whistle (i.e. really, really annoying).

Does anyone have any experience with this turbo? My mechanic suggested it was because I used to have a foam filter on which does not block any noise, however I changed it to a K&N item and it's only slightly quieter.

Other things I have pondered include the BOV leaking (its a standard item) and some sort of resonance in the intake piping. The second option doesnt really make sense though as the whistle happens all the way through the rev range. I'm just hoping its not a problem with the actual turbo.

It is getting tuned on Wednesday and that is one of the things my mechanic is checking, just wondering if anyone's been through this already...

Its just the way GT-RS turbo's are. I have a GT-RS turbo with a APEXi pod filter, and YES it is extremely loud whistling noise. On a long drive it does get annoying, but my exhaust is pretty loud too, so it drowns it out a bit, and i always have my stereo at a decent volume so it does not bother me too much.

Put a stock airbox with snorkel back in and there will be ZERO whistle. But the trade off is you can hardly hear your turbo at all........

At first the whistle was a bit much, but its grown on me nicely. I borrow my mates ute sometimes and he takes my car, and he freaking loves it, even if he does not have to go anywhere he goes for a drive...... so whatever floats your boat i guess.

Link to comment
https://www.sau.com.au/forums/topic/329559-turbo-whistle/#findComment-5355415
Share on other sites

Hahaha yeah you dont mind hearing a turbo whine when your giving it some stick, but not when your just cruising on the highway. As said previously, stock airbox will stop the noise.

Other option is to get a bigger turbo that doesnt spool when cruising on the highway :happy:

Link to comment
https://www.sau.com.au/forums/topic/329559-turbo-whistle/#findComment-5355577
Share on other sites

You wuill see on most larger sclae turbo the inlet has little holes or a lip in it. It is there to stop or help reduce compressor surge.

Due to the amount of boost these turbos run it help created a bit of turbulence and the air running over these "holes" is what is creating your whistle.

I am sure there is more to it, but that is my limited knowledge.

I see, thanks for your help

Hahaha yeah you dont mind hearing a turbo whine when your giving it some stick, but not when your just cruising on the highway. As said previously, stock airbox will stop the noise.

Other option is to get a bigger turbo that doesnt spool when cruising on the highway :)

Yes! You get it.. cruising noises are just irritating. GT-RS was chosen because it has similiar lag to standard.. it passed over the pits but will still flow 400hp :happy:

Link to comment
https://www.sau.com.au/forums/topic/329559-turbo-whistle/#findComment-5355783
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
    • But first....while I was there, I also swapped across the centre console box for the other style where the AV inputs don't intrude into the (very limited !) space.  Part# was 96926-4GA0A, 284H3-4GA0B, 284H3-4GA0A. (I've already swapped the top 12v socket for a USB bulkhead in this pic, it fit the hole without modification:) Comparison of the 2: Basically to do the console you need to remove the DS and PS side console trim (they slide up and back, held in by clips only) Then remove the back half of the console top trim with the cupholders, pops up, all clips again but be careful at the front as it is pretty flimsy. Then slide the shifter boot down, remove the spring clip, loose it forever somewhere in the car the pull the shift knob off. Remove the tiny plastic piece on DS near "P" and use something thin and long (most screwdrivers won't fit) to push down the interlock and put the shifter down in D for space. There is one screw at the front, then the shifter surround and ashtray lift up. There are 3 or 4 plugs underneath and it is off. Next is the rear cover of the centre console; you need to open the console lid, pop off the trim covering the lid hinge and undo the 2rd screw from the driver's side (the rest all need to come out later so you can do them all now and remove the lid) Then the rear cover unclips (6 clips), start at the top with a trim tool pulling backwards. Once it is off there are 2 screws facing rearwards to remove (need a short phillips for these) and you are done with the rear of the console. There are 4 plugs at the A/V box to unclip Then there are 2 screws at the front of the console, and 2 clips (pull up and back) and the console will come out.
×
×
  • Create New...