Jump to content
SAU Community

Recommended Posts

So i went in an hour ago, smile on my face thinking im going to walk out with 10 sausage rolls. I grab 10 of them, have a nice crisp $10 note in my hand, drop them on table, hand the $10 and she says "no no, $1 only" thinking she wants to give me 10 for $1 i agree and then she points at the sign. In writing like this: limited to one $1 item per customer except probably smaller than that.

So you can buy one item that costs $1 per customer... so disappointing, had to drive out to a couple more to get my fill =[

Hmm i am not too sure, i was going to go back when that woman was off work so the other person doesnt notice me haha, but i am pretty sure its ONE $1 item per customer, or at the most, one $1 item of each category per customer. so 1 can of mother, 1 pack of chips etc per customer.

Not 100% on that though, one of the two!!!

So i went in an hour ago, smile on my face thinking im going to walk out with 10 sausage rolls. I grab 10 of them, have a nice crisp $10 note in my hand, drop them on table, hand the $10 and she says "no no, $1 only" thinking she wants to give me 10 for $1 i agree and then she points at the sign. In writing like this: limited to one $1 item per customer except probably smaller than that.

So you can buy one item that costs $1 per customer... so disappointing, had to drive out to a couple more to get my fill =[

thats full of sh1t

i went to one at exactly midnight and asked if there was a limit, the dude was like "nope"

so grabbed 2 slabs and 2 singles and payed $50

maybe he thought you were going to rob him, i did thoroughly check the sign and it did say limit =[

or maybe mine were just bigger jews than yours... i wanted more sausage rolls! who said they are rank they are awesome!! =[

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi guys . Can someone help me  I bought an Android screen for my Nissan fuga but it won't turn on   
    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
×
×
  • Create New...