Jump to content
SAU Community

Recommended Posts

Hey Guys,

I have about $11,000 to spend on a GTR, I know this is not a lot to spend on a GT-R but it is all ive got.

I would prefer an R32 but will look at R33s.

It does need to be GT-R however.

Condition is generally not that important but the cleaner the better

however if it has faded paint or imperfections in the paint and/or body im not interested.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/329975-gt-r/
Share on other sites

Hey Guys,

I have about $11,000 to spend on a GTR, I know this is not a lot to spend on a GT-R but it is all ive got.

I would prefer an R32 but will look at R33s.

It does need to be GT-R however.

Condition is generally not that important but the cleaner the better

however if it has faded paint or imperfections in the paint and/or body im not interested.

Cheers

Ok, so you want a GTR for $11k, but it also must be in good condition with no paint/body imperfections?

Fark me, have you mistaken the $ symbol for the Euro symbol.

Seriously speaking, your posts are insulting to sellers and if you can't afford a certain car its pretty simple, you can't buy it.

But just in case this works,

I have $20k, thats it, for an R35 GTR so if someone has one for sale let me know. PS no imperfections.

Link to comment
https://www.sau.com.au/forums/topic/329975-gt-r/#findComment-5361785
Share on other sites

thanks J'z-R33

and sorry to the rest of you, when I said i dont care about the condition I meant engine and interior and stuff

i apoligize for the confusion and any offence i caused

I think what they're saying is that you couldn't afford even a beat up GT-R

Link to comment
https://www.sau.com.au/forums/topic/329975-gt-r/#findComment-5366438
Share on other sites

hi, i have a gtr that I'd like to sell.

I need to make room in my garage for a Castrol Supra so i think it's time to sell.

This one is a Nismo edition.

it's got a stage 4 turbo, stage 3 intercooler, race chip and full race exhaust.

it's been a while since i changed the tyres though, so you might need to do that. Race Medium tyres are on sale at the moment at Bob Jane though, so it's not to bad.

Here's a pic of paint

gt3skylinegtr_in.jpg

Link to comment
https://www.sau.com.au/forums/topic/329975-gt-r/#findComment-5366446
Share on other sites

you could probably find one , but you may also find its a rebirth gts with the all GTR panels stuck on to it, my mate affectionately calls them Trannys

Edited by Hiroshima Screamer
Link to comment
https://www.sau.com.au/forums/topic/329975-gt-r/#findComment-5366466
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
    • Pull codes via the self-diagnosis procedure. As far as I can tell this is just a sign of transmission issues but not a code unto itself.
    • Hi All, putting the engine back together and everything is perfect except have this plug left over.. any ideas what it is for and where it goes? Is on cold side under the intake plenum *note not a stock plug, as everything has been modified Cheers
×
×
  • Create New...