Jump to content
SAU Community

Recommended Posts

Even though I'm on one day in day out, I'm a noob when it comes to PC Specs.

Was looking at getting a new PC for home, and want soemthing that won't be obsolete in a year or 2.

I get a bit of a deal through work if i buy Dell. So what do you think of the below?

Yes, you could probably build one cheaper, but given my noobiness, I'm a bit more comfy with buying off the shelf.

Dell 8100 XPS

Intel® Core™ i7-860 Processor (2.80GHz, 1333MHz FSB, 8MB Cache

Genuine Windows® 7 Home Premium 64bit Edition

Alienware OptX™ AW2210 21.5” Full HD Widescreen Monitor

6GB (2x2GB/2x1GB) DDR3 SDRAM 1333MHz Memory

1TB SATA 3.0Gb/s Hard Drive with Native Command Queuing

Single Drive: 16X CD/DVD burner (DVD+/-RW) w/double layer write

1792MB NVIDIA® GeForce® GTX 260

Also the usual MS starter software, 7.1 audio etc etc.

The above would be around $1750 delivered

Its mainly used for general PC stuff, little bit of gaming.

Is it overkill? If yes what should i spec down?

Any similar off the shelf packages for a similar price?

thanks guys

Link to comment
https://www.sau.com.au/forums/topic/330055-home-pc-advice-dell-8100-xps/
Share on other sites

With Dell, if anything buggers up, it has to go back to Dell to fix (kinda like crApple Crapintosh)

I came across a few Dell laptops and the battery needed fixing so I asked a friend at a computer store he worked at and he told me to see Dell...

Similar to their printers, I get ppl calling up and coming into my shop asking for a replacement ink cartridges and I say, the best I can do is refill it otherwise you have to order online through the Dell website.

Dell might make it a great package deal and sell you the PC, but I'm not buying it.

Your best to get a PC built to your specifications.

So "word processing", "internet browsing" and "Gaming" is what you want it for then the ppl who build your PC will be able to say what's suitable for that set up.

Not much point to spec down as a lot of the entry level / technology these days are at a very high standard.

you could save a fair bit on the processor, memory and gfx card if you dont do much gaming. id recommend getting someone like msy to build you one to your specs or better yet surely youd know someone who could do it for you, hell if you were in SA id build it for ya

With Dell, if anything buggers up, it has to go back to Dell to fix (kinda like crApple Crapintosh)

Totally dependent on the support you get with the system at the time of purchase. A lot of Dells come with on-site service and I have used it without any issues.

But I would never buy a dell for a home PC and always build my own.

Dell use Foxxcon components LOL (but then so do Apple)

yeah I know the subcontractor tech quite well now as I do all the warranty calls, love someone else having to do fiddly jobs like dissassemble laptops!

their ProSupport is awesome and actually has aussies who know what they are talking about in their call centre!

Looks good. Very good price - certainly better than off their website.

Couple of recommendations (maybe)

1) Windows 64 Ultimate (less problems)

2) Blue Ray drive is fairly cheap, and can play movies extra couple of hundred for the best one (can write DVD's etc) : Blu-ray Disc Drive (BD/DVD/CD burner w/double layer BD write

3) Office pro - cheaper to buy bundled

4) 3yr warranty

If you have the money then it will work fine for you over the next 2 to 3 years.

If you have more budget, then maybe Precision desktops - but they do start at that dollar amount - better build, more robust, bit more serious machine, but does cost. If serious gaming then alienware - fantastic graphics but easy to spend well over double the price.

If you want to spend less, then what number did you have in mind ?

The one you have is good middle road, great for home use, if serious user then might need to spend more :(

Good price compared to what though?

The pricing for that system is offensive.

CPU - 330

RAM - 180

HDD - 100

Monitor - no more than 220

GPU - 300

Burner - 20

That's 1150 - without the cheapie mobo, case & PSU

So say case:100/psu:100/mobo:150

Another 350 - $1450 without software & $100 speakers.

It's not "bad" value I guess, but can still be done cheaper either way.

Oh and to answer you bobby - those specs are not overkill - they are reasonably good.

I have a issue with the GPU to be honest, old gen shit with new gen everything else is a bad match IMO.

But it will be limited by the Power Supply which im guessing is a cheap 450w unit

Thanks guys, really appreciate all the advice.

To summarise, its not bad, but can get better for the price?

Rather than rush into it, I'm gonna go out to a few PC places in my area, and see what they recommend, have and take it from there. The Dell looked good, but now that I'm over the initial, i must have a new PC today! I'm going to take my time :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Good luck on the weekend mate
    • Must have been an absolute nightmare to drive when the power steer was out, the rack ratio/wheel size/caster is all set up for power assistance
    • Welcome to SAU, what are you looking at buying?
    • I checked the injectors again (1 and 2, since they’re easiest to access) to make sure they weren’t clogged. Even though the entire fuel system had been cleaned, I wanted to be certain. Everything looked clean, so I reinstalled and connected everything. When I started the car to confirm everything was okay, it immediately revved up high, so I shut it off straight away. I checked to see if I’d missed a vacuum hose or something, but everything was connected. On the second attempt, the car ran without the high idle, but I noticed a distinct “compressed air” sound coming from the engine bay. Tracing the sound, I pushed injector #6 forward slightly and the noise stopped — it turned out it wasn’t seated properly, despite the fuel rail being bolted down. While holding it in place, the car idled steadily without stalling and ran for over 5 minutes. At this point, I pulled all six injectors out just in case I hadn’t seated them correctly or dirt had gotten onto the O-rings. Unfortunately, I discovered that I had damaged 3 out of 6 injectors (the OEM 270cc ones) during installation. So yes, this was my fault. Since only the pintle caps were damaged, I’ve ordered a Fuel Injector Service Kit from NZEFI to refurbish them. In the meantime, I reinstalled my new injectors – the car now idles fine for over 15 minutes without stalling. I have not attempted to drive it so far. It’s not perfect yet, as it hesitates when the throttle is pressed, but it’s a big improvement. Unplugging the IACV with the new injectors idles at around 800rpm, even with the IACV screw tightened fully. But this is probably due to tune.
    • I wanted to try and preserve the front bumper as long as possible, they're not cheap and are made to order in Japan. Taking inspiration from my previous K11 Micra build where I made an undertray for the Impul bumper, I did the same for this BN Sports bumper but a little slimmed down.  This time round I only made a 'skid plate' (if that's the correct wording/term) for just the bumper surface area, the Micra version covered the gap like an undertray. Starting off with a sheet of mild steel approx. 0.9mm thick 4ft x 2ft in size. I traced around the bumper, cut it out and cleaned the edges. Luckily I was able to get two halves from one piece of metal In the video I installed it as is, but I've since then I've removed it to spray and add a rubber edging trim. The rubber trim is suitable for 1-2mm and it's a really nice tight fit. The bolts had to be loosened due to the plates being too tight against the bumper, the trim wouldn't push on I used some stainless M6 flat headed bolts for a flusher finish (rather than hex heads poking down), I believe this style fastener is used for furniture too incase you struggle to source some. The corner's are a little wider, but this may be an advantage incase I get close to bumping it  The front grill got some attention, finally getting round to repairing it. Upon removal one fixing pulled itself out of the plastic frame, one side is M8 that fixes inside of the frame, where as the other side is M5. Not knowing I could get replacements, I cut down an M8 bolt, threaded it inside the frame along with a decent amount of JB Weld.  The mesh was replaced to match the bumper. One hole on the bonnet/hood had to be drilled out to 8mm to accommodate the new stud, once the glue had set it could be refitted. I think the reason the grill was double meshed was to hide the horn/bonnet latch (which makes sense) but I much prefer it matching the bumper Bumper refitted and it's looking much better IMO The Youtube video can be seen here: https://www.youtube.com/watch?v=bVZP35io9MA
×
×
  • Create New...