Jump to content
SAU Community

Recommended Posts

Hey every1im a 21 yo female who just purchased a r34 gt(im a p plater) for $8,200 with rwc(vic) major service and new timing belt within a year. 6month rego

cant find any info on the net about the 'GT's' any links that could benifit me?

whats hicas in technical terms.... is it like tcs or yaw controll etc?

i figure that if you get a non turbo skyline the internals are the same as the turbo model so its going to be extra reliable....... yeah?

cheap mods(more 4 looks) links/ideas??????? thinkin of getting a r34 badge(yes i know u guys wouldknow the diff but 99 percent of people wont and their jaws will be dragging on the ground when they c a 21year old girl driving what they think is a r34 gtr skyline(having 4 doors probably wont help to encourage this assumption) haha

thoughts/ideas on what i should do/change would be much appreciated..;)

Chantalle

hicas is rear wheel steering . it only works above 80 kph . some people like some dont . a lot of poeple dont like it for the wrong reasons

dont put a gtr badge on it . everyone will give you shit like major shit

http://en.wikipedia.org/wiki/HICAS

put the GTR badge on and you will be regarded as the biggest douche.. If you wanna sleep with 15 yr old boys, then yes get the badge cause that's the only people that will care about seeing your GTR badge..

The internal setup is different to the turbo model so no... however it will still be just as reliable if you don't thrash it

Do a search on your questions as there are mulitple threads on HICAS.. And r34 cosmetic mods.. ody kit etc.. 4 door bodykits are going to be limited on options with side skirts and rear bar though..

Edited by .:: GimpS-R34 ::.

+1 for not putting a GTR badge on your car. it will just make you look stupid to other skyline owners and a large portion of other car enthusiasts who know that a GTR isn't in fact a 4 door non turbo.

as for motor internals, as said above, they are different to the turbo models.

for power they put out, it's generally around the 110kw at the wheels but will vary from car to car and dyno to dyno (they are 147kw at the flywheel). they are only really as fast as a 6 cylinder commodore or falcon (a touch slower if you have an auto).

Don't GTR badge it, people don't get away with that on coupes let alone 4 door cars...

Also non-turbos don't have the same internals as turbos, they are weaker. Although non-turbo vehicles are generally speaking more reliable because of less power and less complications due to not having a turbo.

Yeah dont but the gtr badge on!! lol what colour is it.

4 door you planning on starting a family xP sorry couldnt help myself

yeah not to many 4 door kits but then again depends on what mods and how much ur budget is.

Lol, I didn't really want a 4 door, not a huge fan of them but I don't mind heaps.

Nope not looking for 15 year old boys, and not looking to impress anyone with my car, it's my daily drive.

I saw the GTR bage on Ebay and thought I'd pose the question but wasn't super convinced about the idea. I was thinking that it wasn't even worth the $7 for the badge.

Chantalle

u should save all ur money until u are nearly off ur p's then drop an rb26 in there with gtr brakes and some nice coilovers. dont do much with the body kit. subtle is better imo esp with a sedan

thats what i would do if i were on my p's

Don't put the GT-R badge. People will laugh at you if you do.

Unless your car is an R34 GTt or GTv - Your car will not have HICAS.

Pics of your car will help - especially the front wheel area - we can then tell if you have a GTv model or not.

I'd imagine you are on your Ps. I wouldn't mod the car - the cost and the trouble from the cops isn't really worth it.

Probably a high flow panel filter, some light cosmetic mods such as clear indicators, window tint and nice wheels (not bling rims!)

I have the same car on my greens as well, and have to agree with everyone that GTR badges are for GTRs only. It could be even as worse as putting a GTR badge on a GTS-T which is up there as well. Just cruise around like me until your off the p's and then think of getting a GTR.

Then discover that they still haven't saved enough after 3 years and settle for a GTS-T anyway :(

Or they get impatient in the mean time and turbocharge their GT/GTS lol.

If your car is absolute stock I can suggest some things I did to mine :(

From cheap/easy to expensive:

-Change out those stupid orange front-side lights with white/blue ones and make the mains Xenon lights - easy

-K&N panel air filter - dead easy

-Tint windows - easy

-Full kit exhaust to make it sound like a real skyline - harder

-New 18" rims - harder (need to research)

Have fun! and pls.....don't tag it..keep it simple...it's a 4 door.

Don't put the GT-R badge. People will laugh at you if you do.

Unless your car is an R34 GTt or GTv - Your car will not have HICAS.

Pics of your car will help - especially the front wheel area - we can then tell if you have a GTv model or not.

I'd imagine you are on your Ps. I wouldn't mod the car - the cost and the trouble from the cops isn't really worth it.

Probably a high flow panel filter, some light cosmetic mods such as clear indicators, window tint and nice wheels (not bling rims!)

Hmm it says that it's a 25GT however is has the HICAS light on the dash, so perhaps it's a GTv, because it's def not a GT-T.

Fillup- Windows are already tinted in a very dark tint. I've already had the air box off and had a look what is has in there but it has a paper filter, I've blown it out for now but getting a K&N when I get paid. I have a set of rims in my shed off my BMW however I have to do a little more research as to whether Jap/Euro stud pattern is really interchangeable with no trouble, but the guy from the tyre service said it was.

Hmm it says that it's a 25GT however is has the HICAS light on the dash, so perhaps it's a GTv, because it's def not a GT-T.

Fillup- Windows are already tinted in a very dark tint. I've already had the air box off and had a look what is has in there but it has a paper filter, I've blown it out for now but getting a K&N when I get paid. I have a set of rims in my shed off my BMW however I have to do a little more research as to whether Jap/Euro stud pattern is really interchangeable with no trouble, but the guy from the tyre service said it was.

Cool - If the car is a GTv that means it has all the turbo bits (brakes, HICAS, LSD, GTt suspension) minus the turbo :mad:

Then discover that they still haven't saved enough after 3 years and settle for a GTS-T anyway :D

Or they get impatient in the mean time and turbocharge their GT/GTS lol.

already have the cash hehe, just the wait.

hey again, do all skyliness have lsd's? probably wouldent look at putting a bodykit on it, its silver, going to get the outside detailed. would just a K and N panel filter suffice or is their somthing better?

has anyone changed the intake setup (b4 the airbox) and kept it looking fairly stock still? looks restrictive(sound and flowwise), any good catback exhaust systems on the market that wont cost me some human bodyparts?

so how do the interals differ between the gt-t and the gtv/gt? is there a lower compression ratio in the turbo varient? i imagine the ecu would have to be different, they would be both DOHC, spring rates on the valves?

can anyone send me links to any information/spec sheets specifically for the gtv/gt models?

o yeah and btw I do know a reasonable amount about cars....... just not Skylines so dont judge me if i ask a question that may SeeM stupid to you guys.

thanks in advance:)

yeah the turbo models have a lower compression. i don't know much about the strength of materials used in the internals though. and yes ecu is different. the gearbox is also stronger on the turbo model.

yes the k&n panel will be fine and i wouldn't bother too much about modding the intake piping. very little (if anything) to be gained from that unless you really start making big changes.

i also have a feeling that the bmx wheels won't fit on the skyline as i think they are the same stud pattern as a commodore and the skyline is the same as a falcon.

thanks mad082

will put pics up today so we can figure out if its a gt or a gtv.

going to ring around the wreckers looking for a silver stock rear spoiler unless any1 on here has 1 that they wanna sell?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks for that, I'll check it all out. I can always do the brakes last anyway if its a problem.  The 16's are super cool, if they do fit I'll cruise around with them for a bit.  
    • Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
    • I forgot about my shiny new plates!
    • Well, apparently they do fit, however this wont be a problem if not because the car will be stationary while i do the suspension work. I was just going to use the 16's to roll the old girl around if I needed to. I just need to get the E90 back on the road first. Yes! I'm a believer! 🙌 So, I contacted them because the site kinda sucks and I was really confused about what I'd need. They put together a package for me and because I was spraying all the seat surfaces and not doing spot fixes I decided not to send them a headrest to colour match, I just used their colour on file (and it was spot on).  I got some heavy duty cleaner, 1L of colour, a small bottle of dye hardener and a small bottle of the dye top coat. I also got a spray gun as I needed a larger nozzle than the gun I had and it was only $40 extra. From memory the total was ~$450 ish. Its not cheap but the result is awesome. They did add repair bits and pieces to the quote originally and the cost came down significantly when I said I didn't need any repair products. I did it over a weekend. The only issues I had were my own; I forgot to mix the hardener into the dye two coats but I had enough dye for 2 more coats with the hardener. I also just used up all the dye because why not and i rushed the last coat which gave me some runs. Thankfully the runs are under the headrests. The gun pattern wasn't great, very round and would have been better if it was a line. It made it a little tricky to get consistent coverage and I think having done the extra coats probably helped conceal any coverage issues. I contacted them again a few months later so I could get our X5 done (who the f**k thought white leather was a good idea for a family car?!) and they said they had some training to do in Sydney and I could get a reduced rate on the leather fix in the X5 if I let them demo their product on our car. So I agreed. When I took Bec in the E39 to pick it up, I showed them the job I'd done in my car and they were all (students included) really impressed. Note that they said the runs I created could be fixed easily at the time with a brush or an air compressor gun. So, now with the two cars done I can absolutely recommend Colourlock.  I'll take pics of both interiors and create a new thread.
×
×
  • Create New...