Jump to content
SAU Community

Recommended Posts

Hi Fellas,

On my way home from work I gave my car a little squirt... and it ran fine...

I gave my car another squirt and the turbo didn't sound nearly as loud, the turbo was making a very different pitch and smoke was coming from around the turbo housing when I opened the bonnet.

The turbo still makes full boost, but the car isn't making the power it used to, and the turbo sound COMPLETELY different.

Not sure what it could be? I check all the pipes and stuff that was all fine....

If my turbo was blown it wouldn't be making boost?

Also, not when I hit it the car backfires sometimes under full load...

Has anyone ever experienced such symptoms, or has any idea what it might be?

Thanks.

Link to comment
https://www.sau.com.au/forums/topic/330678-i-think-my-turbo-has-died/
Share on other sites

any unusual smoke from the exhaust.

have you pulled off the turbo inlet to check the turbine, see if it spins freely etc.

does the engine tick when you rev it with the bonnet up?

might just be a blown turbo >manifold gasket

If it's a stock turbo, its possible part of the ceramic exhaust wheel has chipped throwing off the balance of the wheel. If the turbo was completely blown, it would revert to being N/A, and you will definitely know powerwise (low compression N/A RB anyone?)

Check the cat hasn't melted/blocked up, and check for snapped studs on the manifold and turbo

Its an RB25/30 with a GT35r.

It's not the cat because I am running a straight pipe.

There has been no smoke from the exhaust at all, which makes it even more unusual....

When driving off boost and idling, the car sounds fine, it's only when it's under full load it start playing up....

Ill bull off the intake pipe when the car cools down to see if the wheel spins freely.

Thanks for your suggestions but, keep them coming!

leak in cooler or cooler piping, i had a leak in one of my joiners and it made the same boost, just felt like something was wrong

Could be the cooler piping, but then again, there was some outrageous smell coming from the turbo housing with smoke?

meh... just empty it and see how quickly it refills. then you can start worrying if its full pretty quickly

What's the "standard" if you'd like for how fast it should fill up?

I drive me car everyday to work, and quite a bit on the weekends, and I do push it quite a bit (that's what it is made for?)

Would it be bad, lets say, over 2 months for 600ml to fill up in the can?

Keep in mind its a performance vehicle running high pressure (RB25/30 with GT35R running at 23PSI)

That sounds like a decent amount of oil to fill a damn 600ml catch can in 8 weeks of driving on the street....

My car gets maybe 1mm of oil in the bottom of the catch can every time I service it which is around 6 months no matter how hard I drive it including mountain runs sitting at high RPM for 8 minutes up and down.

Curious to see what other people say :D

Edited by PM-R33

Some engines breath heavier then others. Especially at 23 psi with a 35r.

Not worth worrying about it.

Could put a drain back to the sump from the catch can.

Have u done any oil control mods when u built the motor?

One of the main issues with a bit of blow by is the fuel vapour breaking down the oil which then doesnt lubricate as it should.

So try not to miss an oil change or maybe even change it more frequently.

Obviously ur running forged pistons which when cold are even worse at sealing in compression. So let it warm up to operating temp, not just water temp but oil aswell, before u boost it at all.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...