Jump to content
SAU Community

Recommended Posts

Hey guys, im after a few parts for my build. if anyone has any of these please email me at [email protected]

tomei poncams type b

sard 700cc injectors or similar

fuel regulator

1xbosh 044 fuel pump

high mount t03/04 manifold

z32 afm with plug

oil catch can

oil lines & oil cooler

and if possible a garret 3037 turbo or similar or T04z

Many thanks,

Rob

Link to comment
https://www.sau.com.au/forums/topic/331632-parts-for-my-build/
Share on other sites

Poncams are Type A, Type B you will need Type B valve springs and you will need to clearance the head.

You dont need a fuel reg, stock one is fine.

GT3076 and a T04Z are very different turbos, i would stick to the 3076.

I have Poncams and Type A spring to suit for $1000 if you are interested.

Poncams are Type A, Type B you will need Type B valve springs and you will need to clearance the head.

You dont need a fuel reg, stock one is fine.

GT3076 and a T04Z are very different turbos, i would stick to the 3076.

I have Poncams and Type A spring to suit for $1000 if you are interested.

hey mate,

Ah ok, so type A wouldnt really need any modification i presume?

Would you stick with the 3076 due to faster spooling? went to the boys at just jap, they recommend the GT35 for this build, could i ask for your opinion?

Thanks champ

  • 2 weeks later...
Hey guys, im after a few parts for my build. if anyone has any of these please email me at [email protected]

tomei poncams type b

sard 700cc injectors or similar

fuel regulator

1xbosh 044 fuel pump

high mount t03/04 manifold

z32 afm with plug

oil catch can

oil lines & oil cooler

and if possible a garret 3037 turbo or similar or T04z

Many thanks,

Rob

Heya mate

I got a lot of these bits available but in brisbane.

Oil cooler

Afm and plug

Oil catch can

Complete fuel setup. fuel lines, surge tank, pumps, reg.

HKS 3037 turbo kit.

Ive also got the poncams but for a series one head. Ive got the rebuilt head and all for sale though if interested.

interested?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Pretty sure it is a common fault. I believe this is the only part you need, but don't quote me as I don't have a V36.  I also believe it is a bit of a pain to change and the device needs to be encoded to the car once it is replaced, so may need someone with the right tools. Buy Genuine Nissan 48700JF00D (48700-JF00D) Lock Set-Steering. Prices, fast shipping, photos, weight - Amayama
    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
×
×
  • Create New...