Brake Lights Stay On- Tried Switch!

[RoninISC]

The brake lights on my '96 Skyline 33 stay on. The pedal switch pin inserts fully. I pulled off the harness, which should open the circuit, and lights still stay on. I pull the fuse and they go off. Is there something else in the circuit or am I right in assuming that there is a hardwire close around the pedal switch? And any ideas where it may be?

[blind_elk]

Maybe the switch is kaput. Test it with a multimeter.

[Duncan]

and check if the earth at the brakes lights have continuity with earth when the switch is off. probably a short somewhere in the wiring

[HI_PSI]

on the pedal bracket just behind the switch should be a rubber stopper if there is no stopper this is ur problem this stopper pushes the switch in when the pedal is released

[RoninISC]

The brake lights on my '96 Skyline 33 stay on. The pedal switch pin inserts fully. I pulled off the harness, which should open the circuit, and lights still stay on. I pull the fuse and they go off. Is there something else in the circuit or am I right in assuming that there is a hardwire close around the pedal switch? And any ideas where it may be?

u guys are awesome thanks.