Jump to content
SAU Community

R31 Ls1 Conversion

v-spec2

By v-spec2,
in Victoria

 Share

Recommended Posts

v-spec2 Apprentice

v-spec2

Posted
Posted

Hey guys , I'm planning to do a LS1 conversion in my series 3 R31 skyline. So i was wondering if you guys knew anything about the conversion or anyone who has done it? I plan to complete this project by mid next year if anyone could give me some useful information it would be great. I have already used the search criteria and could not find much information.

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/332914-r31-ls1-conversion/
Share on other sites
tm_r33 Experienced

tm_r33

Posted
Posted

im sure its been done many times before but as with any major engine conversion u will usually not find any two the same. thats the thing about it. you will spend many hours working things out and finding ways around things and finish with a car thats quite unique. of coarse when its a more simple conversion (say.. putting a 30 bottom end in a 33 or rb into a smaller nissan like a silvia) it may not take as much modification or innovative thinging as putting a big v8 in a completly unrelated chassis.

but im sure you will work through it. its far from the weirdest conversion ive seen. a hyundai excell with an ecotec engine with a huge single turbo hanging off it was a bit of an eye opener for me. the way the had to ...."adjust"..... the floor pan to suit rear wheel drive was lets just say, interesting lol

v-spec2 Apprentice

v-spec2

Posted
  • Author
Posted
im sure its been done many times before but as with any major engine conversion u will usually not find any two the same. thats the thing about it. you will spend many hours working things out and finding ways around things and finish with a car thats quite unique. of coarse when its a more simple conversion (say.. putting a 30 bottom end in a 33 or rb into a smaller nissan like a silvia) it may not take as much modification or innovative thinging as putting a big v8 in a completly unrelated chassis.

but im sure you will work through it. its far from the weirdest conversion ive seen. a hyundai excell with an ecotec engine with a huge single turbo hanging off it was a bit of an eye opener for me. the way the had to ...."adjust"..... the floor pan to suit rear wheel drive was lets just say, interesting lol

I'm just thinking of the fabrication that its gonna in vole in with the engine bay. But it is a project car so i should be expecting something like that.

tm_r33 Experienced

tm_r33

Posted
Posted

well yer there will be some fabrication i imagine. u will have to work out which crossmember and engine mounts and then if u run the ls1 gearbox u will have to work out the gbox crossmember and perhaps custom tail shaft. or if u wanted to use a nissan box u would need to find some sort of bell housing adaptor.

iseekool Veteran

iseekool

Posted
Posted
im sure its been done many times before but as with any major engine conversion u will usually not find any two the same. thats the thing about it. you will spend many hours working things out and finding ways around things and finish with a car thats quite unique. of coarse when its a more simple conversion (say.. putting a 30 bottom end in a 33 or rb into a smaller nissan like a silvia) it may not take as much modification or innovative thinging as putting a big v8 in a completly unrelated chassis.

but im sure you will work through it. its far from the weirdest conversion ive seen. a hyundai excell with an ecotec engine with a huge single turbo hanging off it was a bit of an eye opener for me. the way the had to ...."adjust"..... the floor pan to suit rear wheel drive was lets just say, interesting lol

off topic - but do you have pics or a link - sounds interesting

  • 3 months later...
V28VX37 Veteran

V28VX37

Posted
Posted

It's an interesting idea but probably worth doing a fair bit of research and running some figures before getting stuck into it. It'll most likely cost X times as much and take Y times as long as you originally budgeted for...

Some potentially helpful threads:

Mad machines, the lot of them! :worship:

R31Nismoid, the 240Z is mod plated and street legal in QLD ... good luck trying to get that done in VIC :(

SKYBEE Collaborator

SKYBEE

Posted
Posted

hi,

Just found this thread and thought if you were in need of some help i know a fella that did a ls1 conversion when he was working in western australia said it was a good job to do, Give Pete at Supreme Tuning a call 56299321

He can help point you in the right way if you lost

  • 4 months later...
SLIDN31 Contributor

SLIDN31

Posted
Posted

thought i would throw these in.....keep forgetting where i have posted lol

Mine finished and being thrashed as we speak lol. Yeh a mate who is an engineer said he can approve it for me, basically the same as my 25det went through for engineering...

http://www.skylinesaustralia.com/forums/topic/355725-ls1r31/

SLIDN31 Contributor

SLIDN31

Posted
Posted

Which VASS was it that said they would approve a 5.7ltr V8 into a 1300kg R31?

Not sure what a VASS is.....Pretty sure you can get anything engineered, its just how much your willing to put down. I got my 25 done very easily, just people are not willing to spend 2-3k on a shitty r31....but i like mine.

SLIDN31 Contributor

SLIDN31

Posted
Posted

It's an interesting idea but probably worth doing a fair bit of research and running some figures before getting stuck into it. It'll most likely cost X times as much and take Y times as long as you originally budgeted for...

Some potentially helpful threads:

Mad machines, the lot of them! :worship:

R31Nismoid, the 240Z is mod plated and street legal in QLD ... good luck trying to get that done in VIC :(

Not sure how to do these multi quote things, sorry for this.....built mine in 2 months....only 3k over budget :yes:

R31Nismoid Grand Master

R31Nismoid

Posted
Posted

Not sure what a VASS is.....Pretty sure you can get anything engineered, its just how much your willing to put down. I got my 25 done very easily, just people are not willing to spend 2-3k on a shitty r31....but i like mine.

You aren't from Vic - So unfortunately what you can do in your state has no bearing on this topic at all.

So as i said earlier, I'm very confident you'll never get a ~300kw LS1 registered into a R31 (factory of what, 140kw) in Vic which was the conversation being had.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      No, your formula is arse backwards. Mine is totally different to yours, and is the one I said was bang on at 50 and 150. I'll put your data into Excel (actually it already is, chart it and fit a linear fit to it, aiming to make it evenly wrong across the whole span. But not now. Other things to do first.
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      God damnit. The only option I actually have in the software is the one that is screenshotted. I am glad that I at least got it right... for those two points. Would it actually change anything if I chose/used 80C and 120C as the two points instead? My brain wants to imagine the formula put into HPtuners would be the same equation, otherwise none of this makes sense to me, unless: 1) The formula you put into VCM Scanner/HPTuners is always linear 2) The two points/input pairs are only arbitrary to choose (as the documentation implies) IF the actual scaling of the sensor is linear. then 3) If the scaling is not linear, the two points you choose matter a great deal, because the formula will draw a line between those two points only.
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      Nah, that is hella wrong. If I do a simple linear between 150°C (0.407v) and 50°C (2.98v) I get the formula Temperature = -38.8651*voltage + 165.8181 It is perfectly correct at 50 and 150, but it is as much as 20° out in the region of 110°C, because the actual data is significantly non-linear there. It is no more than 4° out down at the lowest temperatures, but is is seriously shit almost everywhere. I cannot believe that the instruction is to do a 2 point linear fit. I would say the method I used previously would have to be better.
    • GTSBoy
      DeAgostini 1/8 scale BNR32 Nissan Skyline GT-R Nismo

      By GTSBoy · Posted

      That's hilariously putrid!
    • GTSBoy
      R33 Fuel Pump & Brakes after alarm swap

      By GTSBoy · Posted

      When I said "wiring diagram", I meant the car's wiring diagram. You need to understand how and when 12V appears on certain wires/terminals, when 0V is allowed to appear on certain wires/terminals (which is the difference between supply side switching, and earth side switching), for the way that the car is supposed to work without the immobiliser. Then you start looking for those voltages in the appropriate places at the appropriate times (ie, relay terminals, ECU terminals, fuel pump terminals, at different ignition switch positions, and at times such as "immediately after switching to ON" and "say, 5-10s after switching to ON". You will find that you are not getting what you need when and where you need it, and because you understand what you need and when, from working through the wiring diagram, you can then likely work out why you're not getting it. And that will lead you to the mess that has been made of the associated wires around the immobiliser. But seriously, there is no way that we will be able to find or lead you to the fault from here. You will have to do it at the car, because it will be something f**ked up, and there are a near infinite number of ways for it to be f**ked up. The wiring diagram will give you wire colours and pin numbers and so you can do continuity testing and voltage/time probing and start to work out what is right and what is wrong. I can only close my eyes and imagine a rat's nest of wiring under the dash. You can actually see and touch it.
×
×
  • Create New...