Jump to content
SAU Community

Recommended Posts

Wrecking whole front end of an R32, all components except the long engine for sale, post here with what you're after.

Aftermarket Stuff:

R32:

3 .3 - 3.75" Cat-Back Exhaust: $400

Front Strut Brace: $100

Rear Strut Brace: $100

Carbon Fibre Vented bonnet: $500

Bride Drivers side seat rail (same as most other aftermarket rails): $150

Sparco Drivers side seat rail (same as most other aftermarket rails): $150

Mechanical 1.5 way LSD + housing and half shafts: $950

N1 Headlight (driver's side): $200

Universal (for any car):

2.5" Decat Pipe (S/S): $70

Nismo Gear knob: $50

Short-shifter: $150

Sparco Rev Fixed Back Bucket seat (average condition, has tears etc) $200

R32/R33/A31 Bride Drivers side seat rail (same as most other aftermarket rails): $150

R32/R33/A31 Sparco Drivers side seat rail (same as most other aftermarket rails): $150

3-Point Harness: $50

MOMO "Race" Steering wheel with Nissan Boss kit: $200

GReddy SM Integration Guages + sensors + control unit (water temp, oil temp, oil pressure): $450

3-Layer Copper Radiator: $300

AVS Model 6, 17x9 +36 (pair): $400

Lightweight Jap Wheels (17x8.5 +35): $250

BBS RS 17x9 +20: $1000

Work Meister 18x9/10: $2950

Stock Parts

R32 GTS(t):

Suspension/Steering

2x Front Sway Bar - $50ea

2x Front Complete upper control arm assembly's including bracket and king pin bearing - $100ea -- PICS PICS

2x Front Camber Arms - $40ea -- PICS

2x Front Passenger side Lower Control Arm - $60 -- PICS

2x Front Complete Hub and Brake Assemblys including everything: $280ea

2x Rear Traction arms - $35ea -- PICS PICS

2x Rear Camber arms - $35ea -- PICS

2x Rear Lower Control Arms - $60ea -- PICS

2x Rear sway bar links w/ Urethane bushes - $15ea -- PICS

2x Rear Hubs - $100ea -- PICS PICS

2x Rear Complete Hub/Brake Assembly's including everything - $170ea

1x Rear Sway Bar - $50ea

1x Rear Subframe - $100

2x Rear Toe Rods (non-hicas) - $35ea -- PICS

2x Rear Toe Rods (hicas) - $50ea

Misc:

2x R32 2dr - Doors - Silver - $300ea

2x R32 Gearbox - $500

2x Indicators: $50ea

1x Horn, can be hooked up to any car - $20 -- PICS

2x Stock Clutches, 1 half warn, one fair bit more warn - $30 and $70

1x Stock Rear Spoiler (with brake light) - $50 -- PICS

3x RB20 Coilpacks - $30ea

1x Turbo Timer, very basic timer, manual set - $20

1x RB20 Fuel Pump - $40 -- PICS

1x Igniter Module (breaks down under a lot of heat) - $30 -- PICS

R32 GTR:

2x R32 2dr - Doors - Silver - $300ea

Passenger Side seat with rails: $250

Front Grill: $150

GTR fuel pump

R33:

Standard VLSD with housing and Half shafts: $300

R33 Lower Control Arms - $200pr

S13:

2x Rear Traction arms - $35ea -- PICS PICS

2x Rear Camber arms - $35ea -- PICS

2x Rear Toe Rods (non-hicas) - $35ea -- PICS

Located in SA near Mitcham, can Post Anywhere

Link to comment
https://www.sau.com.au/forums/topic/333389-the-get-me-back-to-japan-sale/
Share on other sites

I'd love to buy 2 of them BBS wheels for skid rims haha

BLASPHEMY

BBS RS's are a cult wheel as well as being wheel pornography, not skidders, clean ur mouth out with soap! :P

  • 2 weeks later...
Quick Q. Nisskid.

How long are the rear traction arms you have? Two holes in them across the bridge, and are they the same length as the ones that come off the wishbone?

they are standard arms man, stock length. i can get that for u if needed.

I only ask as I was supplied arms from Nisswreck with my cradle, but they have given me arms which I believe from the front of the rear wishbone to the hub.. not the traction arms. Just want to check it all out before I re-attach the rear cradle to the car again.. and if i need to get these said arms you have or not.

Sorry for the confusion, Ive just realised I need Toe arms not traction arms!! They've given me the traction arms!EDIT

Edited by Illest
I only ask as I was supplied arms from Nisswreck with my cradle, but they have given me arms which I believe from the front of the rear wishbone to the hub.. not the traction arms. Just want to check it all out before I re-attach the rear cradle to the car again.. and if i need to get these said arms you have or not.

Sorry for the confusion, Ive just realised I need Toe arms not traction arms!! They've given me the traction arms!EDIT

ahk, atm i only have 1 drivers side rear toe arm

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Bummer...yeah i "need" something to "ease" up the work and for my driving it would be enough.    Iam counting the tune "without" turbo. I do not mean "cheap" like something from Temu around 200 USD, "Cheap" is something around 1000 USD? 
    • Starter motors used to use the weight of metal (magnets) to provide torque. Now they use (more) current instead. This. It's completely normal.
    • So thing that had me stumped, but I think is OK....is that when it was up in the air, in neutral I had it running to bleed to coolant while I put the wheels back on. I noticed the rears were turning (slowly) which I'd never seen before 20250928_163512.mp4     Because there had been an issue with clutch slip due to pedal adjustment on the dyno, I assumed there was still and issue so spent some quality time upside down under the dash adjusting the pedal....but no matter what I did the wheels still turned in neutral. Even disconnected the master cylinder to pedal rod and same. In despair, I even removed the clutch slave so there was no chance of any preload causing it.....still happened. So either: 1. Something is not right in the bellhousing, or 2. Its a thing sometimes with cold, thick gearbox oil Internet says it might be 2, I hope so!
    • OK, few more things sorted and it is ready for a shakedown on 10-Oct, with one weird thing. Changed the run in oil and filter for the good stuff. 8l came out, about 8.5 went in with filter so that looks all good. Changed the starter (again), this time for a brand new one, works good. Interesting that the Taaaarks one is shorter than factory but spins harder, I guess electronics have moved on a little in the last 30 years. Will be nice to have a bit of extra space under there. Put the timing cover back on, and noted where the cam gears were set as a record.  Will need to double check the timing but it is pretty close. Also put the coil pack cover and intake snorkel back on. Exhaust Inlet Changed the water out for coolant, bled up nicely. Removed the rear brake pads (well worn factory sumitomo ones!), gave the hardware a good clean and reassembled. I've put bendix XP on the back again because the price is excellent at $150 a set and they worked well on the V37. Front pads have plenty so no issue there
×
×
  • Create New...