Jump to content
SAU Community

Recommended Posts

Do I have to change the manifold for a T04?

I don't really need anything too big so the TD06 might be out... i only want a little upgrade... how big of an upgrade would this be?... i'd prefer to be able to keep the stock manifold for now...

GT2530 + 300zx T3 = int. wastegate?

Link to comment
https://www.sau.com.au/forums/topic/33365-t3-turbo/page/2/#findComment-670709
Share on other sites

  • Replies 48
  • Created
  • Last Reply

Top Posters In This Topic

Im not entirely sure, you may be able to use the standard manifold with an adapter plate for T04/TD06, depending on size, but I'd think it'd be inefficient.

It all depends on power goals, if you want a small upgrade a VG30 T3 or RB25 turbo is marginally better than the stock turbo. They're all internally gated so no messing around, more or less bolt on.

Link to comment
https://www.sau.com.au/forums/topic/33365-t3-turbo/page/2/#findComment-670901
Share on other sites

You do not need a big turbo to hit 12 seconds. Big turbo means big lag. Small turbo means little lag. You need a front mount intercooler due to more heat. You need to manage the fuel and air ratio. If you use a t28 with a outlet from s14 or s15 (about $88 US on ebay) and boost to .9 bar (or 1 bar with front mount)with stock fuel system and 3 inch exhast. I see no problem. You loose pressure with front mount intercooler. I have a greddy on my car. I got so good torque from it. A good upgrade is a S-AFC and get it tune at a dyno.

Link to comment
https://www.sau.com.au/forums/topic/33365-t3-turbo/page/2/#findComment-671188
Share on other sites

DJ, the 25's turbo is a upgrade from your R32's stocker (not smaller).

What is the deal with running boost increasing mods with the stock turbo? My buddy's S14 we are running with my old 20 (see "Old Platform" in sig for visuals) is coming up to 13psi now with only filter and 3" turbo back exhaust (no cat). Will we be able to upgrade to a FMIC without threatening the ceramic turbine since we are already close to 1 bar?

We were thinking of running a T3 turbo, like DJ was thinking about, with a steel impeller as an inexpensive safety buffer while we prepare the rest of the systems to accept a larger turbo later.

Link to comment
https://www.sau.com.au/forums/topic/33365-t3-turbo/page/2/#findComment-671972
Share on other sites

Ok, i've gotta break everything down as i read so that i'll understand.... lol

I realise i don't NEED a big turbo for quick 1/4's and i realise the bigger the turbo, the more lag... that's all kool... which is why i only wanted a small increase.

I am planning to put on a front mount before i up the boost so that's all good too...

So does that mean i use a T28 exhaust side and an S14/15 compressor side?... or vice versa? what is the turbo on these silvias?

T28 exh side = smaller = faster spool?... (need help in these areas)...

And as RBsileighty said: I was actually planning the steel wheels etc to make more boost safer...

So basically, instead of getting another turbo at all... i could just do the steel wheel job on mine, have it hi-flowed and run with that.... worth it? how much?

Link to comment
https://www.sau.com.au/forums/topic/33365-t3-turbo/page/2/#findComment-672000
Share on other sites

Just a thought... what if i put a T04 compressor on my current/standard (T3) exhaust?

this would mean a bigger compressor spooling up at the same speed as my current set-up...

Can this be done?... or what other compressor housings could i use...

Link to comment
https://www.sau.com.au/forums/topic/33365-t3-turbo/page/2/#findComment-673533
Share on other sites

Based on what you have said, it sounds like a good high flow may be your best option. Its likely to give you another 40-50rwkws.

When they high flow turbos they typicaly machine the std housings to accept bigger wheels, and sometimes use housing off other turbos with a more desirable A/R. You will find that generically they will all fit a steel T3 turbine wheel and a TO4 compressor wheel (what hp you are after will dictate the trims of the wheels)

As for running 12s with a high flow on an RB20, my thoughts are thats a big ask. Unless with the std turbo you are already running well into the 13s, then i dint think the extra power will help you into the 12s. Clutch/diff/susp/tyres are a bigger variable then the power you are making.

As for spooling up at the same speed with a TO4 compressor, they are a physically bigger and heavier wheel, so require more airflow to get them spinning, so no i dont think that even with the std exhaust turbine it will have the same response. Also you will most likely want to change the std turbine wheel as they are the most likely part to fail on the RB20 turbo.

If you want to see what a TD06 does for an RB20 then PM me.

Link to comment
https://www.sau.com.au/forums/topic/33365-t3-turbo/page/2/#findComment-673559
Share on other sites

Hey guys... more questions...

does the R34 turbo bolt straight onto the rb20 manifold, will the car require other mods to do this or can it be a straight swap... (bretto)???

The R34 GT-t turbo bolts straight on, no custom manifold work required. Though, I remember being told that when the guy put it on, his boost dropped to 4.5psi, and he needed an EBC. May not be the case in your situation, but who knows?

The advantage of the R34 turbo is that it is newer, and so therefore they have generally does less kilometres. They can go for around $1000.

Link to comment
https://www.sau.com.au/forums/topic/33365-t3-turbo/page/2/#findComment-683600
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
    • Pull codes via the self-diagnosis procedure. As far as I can tell this is just a sign of transmission issues but not a code unto itself.
    • Hi All, putting the engine back together and everything is perfect except have this plug left over.. any ideas what it is for and where it goes? Is on cold side under the intake plenum *note not a stock plug, as everything has been modified Cheers
×
×
  • Create New...