Jump to content
SAU Community

Recommended Posts

Basically wondering if there would be any significant improvement going to a full hard piping kit over the rubber factory hoses for intercooler and/or intake.

By improvement I mean would throttle or turbo response be better for it or an increase in power possibly?

Car i'm thinking about installing it on is a 500 odd hp R32 GTR.

Thanks

Edited by HecticGTR
No gains what so ever.

Only thing you'll create is potential surge issues, especially with larger turbos.

Good to hear and thanks for the info.

It still amazes me how good most of the parts from factory on a GTR is still able to operate effectively even at much higher power levels.

Thanks.

There are some benefits to going a hard pipe kit. Worst problem is the cost. Check out the link below of guys modifying the existing twin turbo pipe to get the same effect as the trust/greddy suction kit. It can help with surge issues from bigger turbos. Also mspeed, hks, trust/greddy dont't fit them for the sake of it.

http://www.skylinesaustralia.com/forums/Tw...20#entry5406370

"the sake of it", worst argument that exists on this forum. The are no different to a BOV, AFR gauge using factory O2 sensors or a different gearknob.

Just because a business makes something to sell/profit from, doesnt mean it offers you any performance benefits.

Its just cosmetic, and fair enough if that is what you want to do it for. Just remember what can happen as a result = surge.

The link you provided is modifying the factory piping anyway.

There is no performance benefit from hard pipe, anything that can be done - can be done with factory gear.

How does a hard piping kit create surge issues? Something to do with the rubber being able to stretch and somewhat smooth out the harmonics of flutter?

Cheers

The rubber piping slightly flexes and for whatever reason it can alleviate surge.

Several users here have had hard piping kits, reverted back to factory piping, surge issues disappeared.

Every case if of course different (gt-rs's sometimes cannot be stopped without balance piping) - however the OP said 500hp, that would be -9s in terms of turbo size so no issue turbo wise. Even 500rwhp, would be -5s, also fine and shouldnt surge with factory BOV's & piping :D

if your running heaps of boost, then the rubber intake pipe from the afm to the turbo can collapse in on itself from the vacuum

I could list a dozen cars running 20+psi through -5s with around 380-400rwkw, no pipe collapse to speak of.

A week ago and I would have agreed that hard pipe kits were for show and a waste of money. My UK supplier of parts RB Motorsport never tried to hard sell me anything and I was surprised they were adamant that running well over stock boost the standard hoses could be unreliable, but given the price of the well known name kits were I carried on running stock. I was at a UK race circuit last week doing a test day and the hose that goes to the LH side I/C inlet burst asunder. I was VERY lucky that RB had a spare stock hose to hand and someone was quite by chance doming to the circuit from their premises 70 miles away that very morning. If not it would have been a costly waste and a a very frustrating day, having done only three laps. I believe the two hoses nearest the turbo outlets, and pre intercooler are the ones that often go, as pre intercooler means very hot air temps. Add old age and raised boost and they can cry enough. I now believe these kits have some definite merit.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • LOL, when one "money pit" is never enough Noice, and excellent work mate
    • I have more than enough digging, laying blocks, moving gravel, airrating, feeding and top soiling the grass, and setting up the veggie gardens growing some seedlings,  and then removing all the unused rock to keep me busy for the next few months at least,  hopefully the rain stops soon so I can get a few hours in this arvo, but, before that Sunday is washing day, is every body happy, you bet your life we are Nice country road day drives are a day off whenever I'm muscle sore from all the landscaping at the moment, but, more epic multiple day drives will start once the majority of the big jobs outside are completed
    • I hear that would involve some nice country road drives into the hills for Mark...
    • I thought I'd come back and add something I JUST learned. A Toyota LandCruiser with a 1HZ, mates perfectly with a bottle of Nulon brake fluid. As in, it perfectly screws in. Great make shift funnel when you cut the bottom of it off. This may work for your Corolla.   Unfortunately, tipping a 10L drum is much harder than a 4 to 6L bottle, and they no longer include the easy pour tap which was just perfection to use previously.  
    • Guys since i bought r33 gts25t coupe 1994 automatic a/t(manual swap 350z gearbox)  all i got is problems, always problems. Lets start with that when i turn key into ignition(ON) fuel pump doesnt always works. Sometimes i have to turn key twice Off/on/off/on until it primes. Its new, dw300 - 340lph. My gearbox broke so i did gearbox swap, install different intake manifold, injectors and i take pipes. Car was sitting in garage for more than half a year. I did assembly all not that long ago and when i turn ignition cant hear prime. All of sudden it stopped working. Theres many videos on YouTube how to make relay mod on r33 straight from battery so i did and it doesnt work! 😰 30 - battery positive  87 - positive from fuel pump to relay 85, 86 - one of two wires from original fuel pump wires(light blue, grey) and it didn’t work. so I check on ignition and took original BLUE relays wires from trunk, next to fuses. (I believe it’s IGN+ and ECU pin 18. it didn’t work…  tried connecting (IGN+ from og relay) and (ECU 104 from 1of4 FPCM wires) to my new relay 85/86 and it didn’t work.  I unplug FPCM. Didn’t work. im thinking what’s wrong   fuel pump is working, if I leave IGN+ on 85 and 86 straight to ground it works but it’s just nonstop. Since it getting constant 12v after key in ON. light blue wire gives me 6-8v.  so how this should be connected? What causing ECU not giving — on pin? Or I did sth wrong and that’s why it doesn’t work? I need negative signal on ECU that control fuel pump. What this should be?
×
×
  • Create New...