Jump to content
SAU Community

Recommended Posts

try the 3071 then with small exhaust wheel

the size of ur turbo ultimately depends on how hardcore you've built your bottom end

ive only even looked at rb26 twin turbo setups myself because i want the exact opposite of you, however there are a few words that stick out ..

"High Mount T51R"

I dont know what it means :D

Maybe u wanna do some research heh

-D

f**k lag, you could have all the power in the world and still get nowhere compaired to someone with half the power.

go a hks 2510 if you can find a decent one around. great turbo for 2ltr's.

makes 200-230rwk's easy and super responsive so great for street and drift (if thats what your into)

or a 2530 would be my next pick depending what i wanted to do with my car. (prob more suited for the rb20)

Edited by Import S13

i wouldnt bother trying to get 300kw's out of an rb20.

could spend half the amount you would making 300kw on the 20 if you just engine swap for a 25 and run a bigger turbo with suporting mods.

would probably be more reliable too at that sort of power.

How about a GT2860R?

Same as HKS 2530 Abe

300kw on a RB20 is likely to be (will be) rather (very) laggy. 240rwkw on a RB20 is pretty quick! Not something to be sneezed at. Also, dont know how fond RB20 internals are of that amount of power...

Garret 2871R could be good also.

not concerned about lag eh?

sweet.

t66 at 2 bar. no boost until late in 4th gear.

or, be sensible and get a hks 2535 for $1300 from JIS.

Edited by scandyflick

300 out of rb20 then expect monster lag unless you throw a lot of coin at it....and trust me you will be hating it with massive lag...i am chasing that power out of my rb25 and still looking at reducing lag as much as possible....sell your 20 and chuck in a 25 with a decent turbo....you will be much happier with 300 our of a rb2t then a 20....

or, be sensible and get a hks 2535 for $1300 from JIS.

This.

sell your 20 and chuck in a 25 with a decent turbo....you will be much happier with 300 our of a rb2t then a 20....

Definitely this.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I certainly fall into the annoyed camp, but glad to hear that if it's happening at low boost then I'm not likely going to blow a turbo and end up with metal shards in my oil. Just feels like it prevents me from really driving it without hesitation and "peak" performance. Wonder if it's the VCAM, it did an impressive job of shifting the torque curve and faster spool, but maybe now it's "too fast" and there's too much air for how open the throttle is.  Based on some other threads, will also do some reading on synchronizing the actuators. They are the default actuators that come on the Garrett's and I would think they would be set the same coming from the factory, but if the turbos don't actually work exactly the same way at the same time as previously mentioned, it would be worth making sure the actuators are actuating together properly
    • I went down this rabbit hole before, ended up sourcing a motor from the UK (I'm in Japan) which also didn't function correctly. With the original motor, I disassembled it and reassembled it and it works somewhat, sometimes. What I could deduce from all my screwing around is that there is calibration of the gears on the inside of the motor and two ramps on the main gear which activate switches that operate the motor and move the sunroof either to retract into the roof or tilt. Where I got stuck was that, it seemed in my case that one or both of the switches that are activated by the ramp on the gear did not always activate and thus the motor did not move, causing it to sometimes not retract or tilt (apologies, I've forgotten which way it didn't work.).  Of course this part is discontinued at Nissan now, it's the same part in the S15 but no other models. I also contacted the manufacturer of the component for schematics - forgot the name, they're based in Gifu - but they declined to share the information due to being bound by an NDA, sadly. Looking through my pictures now, it seems I last had a crack at this in 2022. See, I so kindly wrote "open" and "close" next to the switches. If you figure it out, please do tell me. Those little switches, with the red buttons may need to be replaced.
    • It says 300ZX, does that make it an Aus delivered car? Funny how back in the day I just couldn't care less about Z32's and these days I am just in love with them. Back when Nissan was into pushing the envelope. 🤣
    • Hi guys, just after some guidance with an R34 sunroof that has stopped working correctly. It still opens and closes perfectly fine, but it no longer tilts/vents up or down. As a result, the rear of the glass now sags a bit as it drops down slightly in order to retract into the roof, but now it can't pop upwards into a flush position. I’ve probed the pins on the back of the switch connector with a multimeter and it seems like both switches (for open/close and tilt/vent) still work correctly. Any ideas on what it could be, or where I should even start in terms of diagnosing? I'm sure someone's had this issue before but I haven't been able to find anything online relating to this specific issue, most of the issues are with the seals leaking or the motor failing entirely. Thanks in advance!
×
×
  • Create New...