Jump to content
SAU Community

Recommended Posts

Help me get my shed back in order. Need to fund a new wakeboard!

HKS VPC. Come with everything. Use this to remove your AFM's on your gtr and still run std or pfc ecu $400 Allows control of fuel mixtures to make your car run safe AFR's. Uses its own Map sensor and inlet temp sensor plus all std motor sensors. Removed to return a GTR back to standard to sell.

Set of front guard liners and front under tray. Has factory front brake ducts and I won't seperate. $150 Getting very rare!

RB26DETT oil pump $80

Box random RB26 bits $50. Need to see whats in there. Won't respond to Pm's about this yet.

RB26 block. Good for coffea table. Has a cracked water jacket into head bolt hole. Could re-use it for a std build without any probs. $50 Didn't use water or oil before disassembly.

R32 GTR fuel pump in cradle $80 each.

R32 3inch exhaust with seperate de-cat pipe. Has centre muffler, no rear muffler, just straight throught to out back $100

R32 GTR body fuel cap/flap $30

R32 GTR ABS mater cylinder $75 Below is another full setup

R32 GTR full ABS system- Master cylinder, ABS unit, All related brake lines $275. Would swap for non-abs setup plus small cash adjustment my way. Still in car and work well. Removing to strip weight for track car.

R32 GTR G-Sensor $100

R32 GTR rear diff and GTR driveshafts. Perfect upgrade for GTST? $450

R32 push type 4 puck solid centre button clutch w/looks like custom pressure plate and std flywheel. In VGC. Appears like it hasn't been used much since new. Heaps of meat $400 lot. Will fit all push type RB series motors.

New R/H sill panel $100 Suit GTR/GTST

R32 R/H tail light $30

R33 GTST original/genuine JUN front bar. In good condition, need a couple little bits of fibreglass. Looks like a 400r bar but better. $250. These are bloody expensive new. Currently in white with blue pearl.

Pair Volk Circlar rims 18x9.5 +38mm offest. $300. One painted spray can black. I know where there is another perfect pair for $500 if needed. These sell for around 1500-2000 set. I can't be bothered.

R43 R/H mirror $25

R33 GTR lowered rear springs for std style shocks $50 sits very nice

Set Tein stiff springs. Perfect for drift. $30

Pair headlights for R32 gtr but will fit gtst. Removed the glass from one body. Stil have it. They have a few broken mounts but still worked fine. $40 pair.

Melbourne 40 min south city. Can post. Please no time wasters. You know who you are!

Hey mate

Just a bit of info. A while back when the diff in my R32 GTS-T was buggered, i looked at putting in a GTR diff. I didnt do it because apparently my diff is mounted with rubber mounts, while a gtr diff is solid mounted to the body. It was gunna be a lot of work to make it fit.

I was told that by a reputable workshop i take my car to for major works when i dont have time for it myself, hope that helps with that part....

hey mate can i get pics of the jun front bar and would you be willing to post to mackay qld 4740

I can post it anywhere at your expense. Don't know about frieght prices. Jump on some of the bodykit supplier sites if you want a rough estimate.

Hey mate

Just a bit of info. A while back when the diff in my R32 GTS-T was buggered, i looked at putting in a GTR diff. I didnt do it because apparently my diff is mounted with rubber mounts, while a gtr diff is solid mounted to the body. It was gunna be a lot of work to make it fit.

I was told that by a reputable workshop i take my car to for major works when i dont have time for it myself, hope that helps with that part....

The gtr diff is also rubber mounted. From a quick search it look like you would need GTR hubs. You can still put the GTR diff centre into a GTSt to give it a mech diff.

post-1670-1282567514_thumb.jpg

post-1670-1282567531_thumb.jpg

Just to clarify the 32gtr diff is a staight bolt up (IF) used with a 32gtr subframe,so to fit to a gtst you will need diff,shafts,subframe & hubs as gtst suspension & arms are a direct bolt up to gtr subframe, to use gtr uprights you need gtr rear coilovers.

Just some info since i have done the job before.

free bump >_<

Edited by jas/slo32

hey mate ill take the front bar if you want to pm me with the exact total including shipping and your payment details

cheers Fritz

Help me get my shed back in order. Need to fund a new wakeboard!

HKS VPC. Come with everything. Use this to remove your AFM's on your gtr and still run std or pfc ecu $400 Allows control of fuel mixtures to make your car run safe AFR's. Uses its own Map sensor and inlet temp sensor plus all std motor sensors. Removed to return a GTR back to standard to sell.

Set of front guard liners and front under tray. Has factory front brake ducts and I won't seperate. $150 Getting very rare!

RB26DETT oil pump $80

Box random RB26 bits $50. Need to see whats in there. Won't respond to Pm's about this yet.

RB26 block. Good for coffea table. Has a cracked water jacket into head bolt hole. Could re-use it for a std build without any probs. $50 Didn't use water or oil before disassembly.

Hi,

Would you sell just the two franges (Tongues) from the GTR32 diff.? I am from Mordialloc 3195 can pick up 0433 878905 Alex

R32 GTR fuel pump in cradle $80 each.

R32 3inch exhaust with seperate de-cat pipe. Has centre muffler, no rear muffler, just straight throught to out back $100

R32 GTR body fuel cap/flap $30

R32 GTR ABS mater cylinder $75 Below is another full setup

R32 GTR full ABS system- Master cylinder, ABS unit, All related brake lines $275. Would swap for non-abs setup plus small cash adjustment my way. Still in car and work well. Removing to strip weight for track car.

R32 GTR G-Sensor $100

R32 GTR rear diff and GTR driveshafts. Perfect upgrade for GTST? $450

R32 push type 4 puck solid centre button clutch w/looks like custom pressure plate and std flywheel. In VGC. Appears like it hasn't been used much since new. Heaps of meat $400 lot. Will fit all push type RB series motors.

New R/H sill panel $100 Suit GTR/GTST

R32 R/H tail light $30

R33 GTST original/genuine JUN front bar. In good condition, need a couple little bits of fibreglass. Looks like a 400r bar but better. $250. These are bloody expensive new. Currently in white with blue pearl.

Pair Volk Circlar rims 18x9.5 +38mm offest. $300. One painted spray can black. I know where there is another perfect pair for $500 if needed. These sell for around 1500-2000 set. I can't be bothered.

R43 R/H mirror $25

R33 GTR lowered rear springs for std style shocks $50 sits very nice

Set Tein stiff springs. Perfect for drift. $30

Pair headlights for R32 gtr but will fit gtst. Removed the glass from one body. Stil have it. They have a few broken mounts but still worked fine. $40 pair.

Melbourne 40 min south city. Can post. Please no time wasters. You know who you are!

hey mate ill take the front bar if you want to pm me with the exact total including shipping and your payment details

cheers Fritz

I'll have to get a price on shipping and also work out how to pack it so it won't get damaged. You've saved me a heap of hassles and weekends. It was going to get the chop and go on my 32 gtr.

Tim GTR did you forget to write something?

to easy bud just let me know how much and how you want me to pay! wow that would have been quiet the mission to fit it to a 32

  • 2 weeks later...

Only got to send out one pm tonight before being stopped for some reason and now have to wait another hour to send another one so I'll try again tomorrow.

Pair Volk Circlar rims 18x9.5 +22mm offest. $300. One painted spray can black. I know where there is another perfect pair for $500 if needed. These sell for around 1500-2000 set. I can't be bothered.

Editted offset to +22

Its only letting me send one pm per hour again so if people can attach email addresses to their pm's it will help speed things up.

post-1670-1283378035_thumb.jpg

post-1670-1283378051_thumb.jpg

post-1670-1283378070_thumb.jpg

I'll take the diff without the flanges (tongues) that TimGTR wants and without driveshafts if you'll go $150? Just had a pinion bearing go in my Sil80.

I'll take the diff without the flanges (tongues) that TimGTR wants and without driveshafts if you'll go $150? Just had a pinion bearing go in my Sil80.

Won't be seperating it atm. Might be selling the car so I'll use it to keep the AM diff in it.

Hey I'd like a price on the splash guards and brake ducts sent to Sydney

Thanx brett

Not really worth me selling an item for $100 and then have to drive 20mins then back to drop it of in work time.

ABS unit and master sold.

Found a pair of trust gracer style rear pods to suit R32 gtr. Brand new still in primer. Sell for about $160 new

Will sell for $120.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
    • Ah coolant overflow, previous discussions make way more sense now lol. 
×
×
  • Create New...