Jump to content
SAU Community

Recommended Posts

Just interested if anyone on the inside might know the answer to this question. The thing that's strange is that Pedders VE Commodore coilovers have been out for nearly 2 years and are clearly made of BC parts but BC only just released some under their brand name. I know BC Racing shocks are pretty much all valved the same or at least run generic valving for the spring rate rather than the car. Maybe Pedders do or specify their own valving to justify the extra $700 for the same thing?

Edited by bradsm87
after reading around, most people agree pedders shocks are the same as monroe shocks.

got any pics to compare the pedders coilovers to bc coilovers?

Yep their factory replacement style shocks are Monroes. The Coilovers are definately made by BC. I'm just interested in if Pedders use better valving that BC coilovers come with as BC's are pretty generic.

  • 2 weeks later...

$700 are a big difference... if they are nearly the same, it would be a lot cheaper to get the BCs revalved instead of buying those Pedders. I talked to a guy at BC Racing one year ago and he told me, that they can do a custom coilover set with custom valving. But you have to know what you want or need :( (at least a damping curve).

It's always better to purchase a custom made coilover set for the specific car. Corner weights differ from car to car and most cheaper sets (like BC Racing, K-Sport (D2), XYZ etc.) aren't up to the task.

One question:

Which model of the Pedders and which model of the BC Racing coilovers are you talking about?

Most cheap suspension parts come from Taiwan - Teins are from Taiwan, too! Taiwan doesn't mean bad quality, but it means 10 brands getting the same stuff for their suspension components. e.g.: At XYZ you an purchase coilover kits with aluminium and steel lower mount, choose second one and they look exactly like a BC Racing coilover in another color (btw: BC Racing has just changed the color from gold to red anodized). Even if some parts aren't the same, some could be.

Just have a look at Koyo radiators, they're made in Indonesia...

If you want to know if the coilovers of Pedders and BC Racing use the same valving, then you have to put them on a shock dyno or disassemble the whole thing. Should be a valuable info: some guys with different shocks testing them at a suspension shops shock dyno and posting the graphs right here (hardest and softest setup) - worth a new Thread? :thumbsup:

With corner weights and shock dyno graphs it's not that difficult to calcute the best spring rate for your application!

Wasn't meant that way - just wanted to clarify that taiwanese doesn't mean bad quality :thumbsup: there are a lot of shi*ty parts from China, Taiwan, Indonesia and so on, and there are a lot of shi*ty parts from germany, too :ermm: it's capitalism: sell something cheap/shabby for big money. Not possible to generalise "country = countries quality". All up to the builder's passion and skill!

Sure that Pedders are BC coilovers 1:1?

Sure that Pedders are BC coilovers 1:1?

That's what I'm trying to find out. The PARTS that make up the coilover (maybe minus the springs) ARE 100% made by BC Racing. That's the only thing the public know for sure.

That's what I'm trying to find out. The PARTS that make up the coilover (maybe minus the springs) ARE 100% made by BC Racing. That's the only thing the public know for sure.

Just because the outer parts look/are the same doesn't mean the dampning units, thats all the import inside bits that you cant see, are the same. Both brands will source their gear from the same factory, its possible that pedders option a better dampning unit with better valving or its also possible that its pedders, that company known for enthusiastic pricing, & they've just got a nice profit in them.

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Maf is a question mark but TPS  I have set at 0.47, the fact that I’m getting proper voltage range out of it with the key on leads me to believe it’s functioning properly. I’m getting proper voltages on basically everything. I still need to look up voltage ranges for z32 maf and test that 
    • Honestly no not at all, but it’s a very basic tune, it’s stock injectors q45 tps and z32 maf. Other than that it’s a completely stock base map. The file is from nistune and from my understanding if it was tune related I would be able to unplug maf and tps and it would still start even if it was a really shitty start. I have tried starting it with coolant temp, maf, and tps unplugged none of those 3 togethor or individually changes anything 
    • 🏆 Skyline Supremacy Meets Mount Panorama Magic 🏆 Join SAU NSW as we take the long way to Bathurst, the home of GTR greatness. Saturday 30th August 2025 7:00AM Meeting Hanna Park North Richmond 7:30AM Departure Cruise Via Bells of Line Road 9:00AM Arrival to Stop 1: Golden Poplars Meadow Flat 9:45AM Arrival to Final Destination: Mount Panorama Motor Racing Circuit Meet Location: Hanna Park North Richmond Stop 1: Golden Poplars Meadow Flat Final Destination: Mount Panorama Motor Racing Circuit   *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • What does it look like with highway driving? And yes, I had a similar thought as Duncan. It looks quite similar in my Stagea and I have made myself accept it as normal. Might have to look into it some day   Highway gets as low as 10l/100km on my end so I'm not as worried about it being a mechanical issue. More likely just the tune on the haltech.
    • While I was waiting for the new parts to come in for the charge pipe and radiator I decided to do some turbo modification. The drive pressure (exhaust backpressure) was a lot higher that I thought it should be. For 32lbs of boost drive was 55lbs. The turbine housing is a 1.10AR and my turbo builder has suggested to go to a 1.25AR. To test if a larger AR would do anything to reduce drive pressure AND not spend any money I decided to hog out the divider in my current housing. I removed it from the inlet and the whole way through the housing.  After reassembly and testing it doesn't look like this modification did anything for reducing drive pressure or requiring more fuel (making more power). Oh well, it was worth a shot. We'll get some data at the track if it makes it past the 60ft. I also machined a $7 shift knob off Amazon to fit my Stillway shifter since I didn't like the Stillway shift knob. Next on the list was the radiator replacement and fabrication of a new intercooler tube that had no silicon coupler. No pictures of this - I was short on time each night after work to get this done and didn't stop to take pictures.  Next was to get the clutch disks out and replaced. Previously when installing the dogbox I had ordered a set of the same sintered iron disks I had been running because I switched to the 26-spline input shaft. I thought it was odd that they didn't have any markings or brand name on them like all my old disks had but installed them anyway. At the track I could not get the clutch to lock up using my normal strategies. After two track nights I reached out to the clutch manufacturer and ask their thoughts. They said they had to switch the material out because they were having trouble getting the original material and that this new material would not take to being slipped very well.  So out with the first set of 26-spline disks and in with the correct material 26-spline disks. While I had the trans out I added an inspection/service hole. I've wanted one of these for a while. Now I can have a look at things and change the front cover shimming when needed (clutch wear). I hustled and got the clutch change done in a few hours on a Saturday. Hopped in the car and drove home. On the way home I did a 1-3 pull. When shifting from 2nd to 3rd the core plug in the back of the cylinder head popped out and dumped all the coolant. Thankfully I was only 30 seconds from home and coasted it there. Datalog showed nothing unusual and 2.5psi of coolant pressure. That plug has been in there since 1992 but I guess it worked its way out. Pulled the trans AGAIN and replaced the plug, JB welded it in, and made a brace. Also deleted the head drain I had added in during the bearing issue fiasco.  I am currently changing my boost control plumbing to make it cleaner. After that is done I'll make another attempt at getting past the 60.
×
×
  • Create New...