Jump to content
SAU Community

Recommended Posts

1, have new radiator handy

2, buy tectaloy xtra cool gold (green colour and concentrate - mix with rain water or distilled) found at sprints or supercheap - this is what I personally use and works a treat other people use different brands etc.

3, make sure you have a drip tray to catch coolant

4, have car on jack stands for easier access or ramps

5, take off radiator cap

6, get underneath car, undo bottom radiator hose, let drain, also make sure your not in its firing line

7, if theres auto trans lines to radiator, clamp them with brake hose clamps

8, remove hoses, minimal auto trans fluid should leak away

9, undo all other hose lines etc

10, remove top brackets + any electrical (if there is)

11, remove radiator - double check to ensure radiator is exact match.

then do the reverse. hope this helps.

ps should also be guidelines on back of coolant bottle for mixing ratios.

*note* tho that you may need to top up automatic trans oil level if there are automatic trans lines connected to radiator.

  • Replies 101
  • Created
  • Last Reply

Top Posters In This Topic

it shouldnt be a problem, if you clamp the hoses. just go to your mechanic and ask him if it needs a topup or not (should still be fine as ive done a few radiators with auto trans lines added to them)

  • 3 months later...

Hello friends i need some help,2011 i changed timing belt and seals on my R33 gts-t.

from last few weeks i got little oil leak in engine arond the crack seal area and i took car to the same mechnic for check and he said its seem like its crank seal leaking.

do you guys think crank seal leaked after 15000 km ?? he asking $300 for repair..is it right amount ?? please help me out..if you know some good mechnic and give me some idea about the price that will be great..right now i am on tight budget..thanx

Hello friends i need some help,2011 i changed timing belt and seals on my R33 gts-t.

from last few weeks i got little oil leak in engine arond the crack seal area and i took car to the same mechnic for check and he said its seem like its crank seal leaking.

do you guys think crank seal leaked after 15000 km ?? he asking $300 for repair..is it right amount ?? please help me out..if you know some good mechnic and give me some idea about the price that will be great..right now i am on tight budget..thanx

Crank seals can leak in ten min of installed wrong

or crank floating around

  • 3 weeks later...

Hey guys could you please check this mechnic bill/worksheet and suggest me it is right....

Work Done.

1.Remove all belts,timing covers and timing belt.

2.Remove cam and crank gears. NO LEAK FOUND

3.Clean all removed parts and De-grease engine,with cover off also.

4.Tighten cam cover gasket down and re-check all ok..

IF LEAK CONTINUES -WE MAY NEED TO REPLACE CAM COVER GASKET..

final bill $275...

Now guys tell me what to do,oil leak still there..i asked same time when i went to pick car why you didnt changed cam gasket if its fu888ked...oil leak still there...so do you guys think he going to charge me again...

how much time he need to change CAM COVER GASKET?? PLEASE ADVISE ME AS YOU DID IN PAST.

for labour the bill sounds right, BUT they should have replaced the gasket if there was any doubt about how worn it was.

They didnt, because they want you to pay up, experience the problem again, then come back for more charge$.

Go see Shaun at Boostworx

if its just cam cover gaskets you should give it ago yourself, not a very hard job at all, just takes a while to get to them because of the hoses/piping thats in the way, def save yourself some dosh

My mechenical knowledge not that high to try myself,i booked same guy on monday.he said he will put cam cover gasket,but didnt mentioned about money and i didnt asked either.

but sure i will ask before job done tomorow,hope we will come on some agreement.but this is last visit to this guy next time SHAUN thats for sure..

yeah you are spot about the personal experience,after saw all the way while they were changing cam gasket and half moon

i am 100% sure i can change that myself now...far out man cost me $400 total and gasket cost $109.90 so you are right do it yourself good idea.thanx for help guys hope all go well now..

  • 2 months later...

Well I dont have an R33 BUT!.....I do have a R34 GTT Nizmo. With the nizmo exhaust that opens up and shuts like a varex muffler. So this afternoon I un-siezed the valve and kept it open as the switch doesnt work anymore and I cannot find a thread to help me with the motor or relay for this but anywho....The point I'm making is that after opening the valve I realised how restricted the exhaust was and the quite real difference I felt after opening up the exhaust. So if you are looking for more power, then free flowing and opening up the exhaust should be you're first point of call. As for the fuel economy....you bought a high performance vehicle dude :) Welcome to the cub.

  • 2 weeks later...

i changed and last week done service including..oil change,transmission service,plugs change,O2 senson change,brake pads change..total cost me $1000.. but no diffrence in fuel economy and power as well...

Far out 1k for a full service, thats pretty steep, dont even know if that inclided clutch, radiator and brake fluids, but next time do it yaself and save ship loads

  • 7 months later...

hey all people am back to you guys again to get some idea's and help, i searched in fourm for my problem but no cure for my car with search engine.

car in question is R33 gts-t s1 auto with catback exuast.rest is stock.

am having a problem with my car,recently i was driving and on a intersection its just died on me so i thought whats wrong and i started again and its start no trouble.

since then its start great every arvo as i work in arvo shifts,nothing drama's for 20 minutes driving and then its just cut itself dosn't matter i am on intersection or driving its just shut it off and then if i start its good again and after few minutes same cuts out again.

during the night when i finished my job and driving home no drama most of time.

i searched in this fourm and i cleaned AFM,air valve,change oil,oil filter,fuel and air filter but nothing good

today again after 20 minutes driving same situation but driving back at night no problem.

i dont know what to think and where to look....if you guys know anything or faced this kind of problem in past please be kind and show me some right way to fix it.

Thanks All In advance

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • haha don't worry I'm sue you've got more fun ahead buying a 30 year old turbo car....but at least you are in the right place to ask
    • some days eh? The keyless entry and interior light on/off with the key will be controlled by the Body Control Module, but I'm not certain where that is or what it looks like (you might get lucky with a search to get a part#, which could be printed on it). I'd start at the A pillar/ Under dash/kick panel on the driver's side
    • It might be hit and miss, but Nissan Genuine Parts and Pitworks are not the same thing, although both are available from Nissan Dealers with Nissan Part Numbers. Nissan Genuine Parts are the OEM stuff, Pitworks are their attempt to get people back from generic parts makers
    • I did end up getting it sorted, as GTSBoy said, there was a corroded connection and wire that needed to be replaced. I ended up taking out the light assembly, giving everything a good clean and re-soldered the old joints, and it came out good.
    • Wow, thanks for your help guys 🙏. I really appreciate it. Thanks @Rezz, if i fail finding any new or used, full or partial set of original Stage carpets i will come back to you for sure 😉 Explenation is right there, i just missed it 🤦‍♂️. Thanks for pointing out. @soviet_merlin in the meantime, I received a reply from nengun, and i quote: "Thanks for your message and interest in Nengun. KG4900 is for the full set of floor mats, while KG4911 is only the Driver's Floor Mat. FR, RH means Front Right Hand Side. All the Full Set options are now discontinued. However, the Driver's Floor Mat options are still available according to the latest information available to us. We do not know what the differences would be, but if you only want the one mat, we can certainly see what we can find out for you". Interesting. It seems they still have some "new old stock" that Duncan mentioned 🤔. I wonder if they can provide any photos......And i also just realized that amayama have G4900 sets. I'm tempted too. 
×
×
  • Create New...