Jump to content
SAU Community

Recommended Posts

Anyone reccomend a harness for a dedicated track car? Obviously wouldn't be asking if money was no issue so i would be looking for a good harness for reasonable dollari

Have searched but most threads are from 2007/8 there must be something better out now

Link to comment
https://www.sau.com.au/forums/topic/335386-harnesses-for-camsaasa/
Share on other sites

I suggest going with 3" wide straps as opposed to 2".

Also go with a five/six point to stop submarining under in a big crunch.

Pay particular attention to the buckle mechanism and get on that suits you. I'm astounded with how bad some are for this day and age, in particular the terribly bulky "Cam-over" type ones, just appalling for 2010 imo.

Personally, I use RPM in find them excellent. They have a nice compact bucket, push in like a normal seatbelt, turn to release. They also have nice shoulder strap adjusters that just seem easier to use than most, they don't jam like a lot I've used.

DSCF3870.jpg

Edited by Marlin

Agreed on the adjusters on the RPM units Ben, very easy to use.

One thing I dislike about my OMP's is the side buckle adjusters. They're quite difficult to use and in a poor position, my old Willans units was much more user friendly. Also very much agreed on the crotch strap, they hold you in much better than the 4 point units, just be sure to get one that fits nicely around the crown jewels :banana:

I'm a big fan of the willans. they work well and easy to use. 3inch 4 point with the rotary buckle is about $350, add about $80 for the 5/6 point nut buster strap. yeah it's expensive but cams has extended their life now I think from 5 to 10 years so it works out to be about $40 a year. not a bad price for safety.

http://www.willans.com/

http://www.racerindustries.com/store/index...products_id=515

These are what I got for my car. I bought some other stuff too, so they did a good deal on the package.

I had some brand new Monza 6 point 3" harnesses in the car but just didnt trust them - they were only $200 a set. Not that I could fault them, I just didn't want to trust my life with cheap taiwanese belts and the rotary buckle looked like it would be easy to accidentally undo if you got something caught on it (intercom lead, shirt cuff, etc.).

Edited by warps
im getting a willans 3in 4point soon :down:

I'd advise getting the crotch strap too, much better.

Ben, I want those cobra seats. What did you pay for them mate? They're at revolution racegear here in vic for 1050.

Awesome seats, though my shoulders only fit into the XL versions, and the XL versions don't fit off the shelf rails.

I'm a big fan of the willans. they work well and easy to use. 3inch 4 point with the rotary buckle is about $350, add about $80 for the 5/6 point nut buster strap. yeah it's expensive but cams has extended their life now I think from 5 to 10 years so it works out to be about $40 a year. not a bad price for safety.

http://www.willans.com/

Yup, 10 years now so it just got a whole lot cheaper. :banana:

Awesome seats, though my shoulders only fit into the XL versions, and the XL versions don't fit off the shelf rails.

".... for that fantastic V shape we're all looking for in summer"

You know real race cars don't have such things as girly sliding rails..... bolt the fuggers in! :banana:

I hope the crotch strap doesnt affect my willingness to brake lol

Looks like a 5-6 point with 3" straps and decent buckle. I will check out RPM too.

Thanks for your help guys. Any reason why Revolution racegear has the rpm harnesses for 150? seems too cheap

crutch strap hold u in better under braking?

It helps locate the waist strap and keep it where it's supposed to be, so helps everywhere.

I hope the crotch strap doesnt affect my willingness to brake lol

Looks like a 5-6 point with 3" straps and decent buckle. I will check out RPM too.

Thanks for your help guys. Any reason why Revolution racegear has the rpm harnesses for 150? seems too cheap

RPM is a Revolution Racegear brand, so they're usually well priced. $150 is super cheap though.

All the mentionaed harnesses are good, but are only as good as the fitment.

Have the lap belts done up first and as tight as you can, so you can just get them clipped up.

Then clip in the shoulder straps and pull them down tight, wiggle a bit, then pull again and repeat to take any slack out. It may feel uncomfortable but you'll soon "bed in" to it once you move off.

Now check that the buckle is in the correct position, it should not be up around your belly, it should be in your lap.

Far too often I've seen very badly adjusted harnesses where the buckle is in the guy's stomach, especially 4 point harnesses.

I know most of you know this, but it's important and I thought it worth mentioning :starwars:

The one thing I will add if going for a 5 or 6 pointer is to make sure the buckle is on the waiste strap.

I had a harness with it on the crotch strap which means you ALWAYS had to run it as a 5/6 pointer. Sometimes its nice if you are driving on the roads or whatever to just run as a basic 4 pointer as the crotch strap isn't the most comfortable of things.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Good luck on the weekend mate
    • Must have been an absolute nightmare to drive when the power steer was out, the rack ratio/wheel size/caster is all set up for power assistance
    • Welcome to SAU, what are you looking at buying?
    • I checked the injectors again (1 and 2, since they’re easiest to access) to make sure they weren’t clogged. Even though the entire fuel system had been cleaned, I wanted to be certain. Everything looked clean, so I reinstalled and connected everything. When I started the car to confirm everything was okay, it immediately revved up high, so I shut it off straight away. I checked to see if I’d missed a vacuum hose or something, but everything was connected. On the second attempt, the car ran without the high idle, but I noticed a distinct “compressed air” sound coming from the engine bay. Tracing the sound, I pushed injector #6 forward slightly and the noise stopped — it turned out it wasn’t seated properly, despite the fuel rail being bolted down. While holding it in place, the car idled steadily without stalling and ran for over 5 minutes. At this point, I pulled all six injectors out just in case I hadn’t seated them correctly or dirt had gotten onto the O-rings. Unfortunately, I discovered that I had damaged 3 out of 6 injectors (the OEM 270cc ones) during installation. So yes, this was my fault. Since only the pintle caps were damaged, I’ve ordered a Fuel Injector Service Kit from NZEFI to refurbish them. In the meantime, I reinstalled my new injectors – the car now idles fine for over 15 minutes without stalling. I have not attempted to drive it so far. It’s not perfect yet, as it hesitates when the throttle is pressed, but it’s a big improvement. Unplugging the IACV with the new injectors idles at around 800rpm, even with the IACV screw tightened fully. But this is probably due to tune.
    • I wanted to try and preserve the front bumper as long as possible, they're not cheap and are made to order in Japan. Taking inspiration from my previous K11 Micra build where I made an undertray for the Impul bumper, I did the same for this BN Sports bumper but a little slimmed down.  This time round I only made a 'skid plate' (if that's the correct wording/term) for just the bumper surface area, the Micra version covered the gap like an undertray. Starting off with a sheet of mild steel approx. 0.9mm thick 4ft x 2ft in size. I traced around the bumper, cut it out and cleaned the edges. Luckily I was able to get two halves from one piece of metal In the video I installed it as is, but I've since then I've removed it to spray and add a rubber edging trim. The rubber trim is suitable for 1-2mm and it's a really nice tight fit. The bolts had to be loosened due to the plates being too tight against the bumper, the trim wouldn't push on I used some stainless M6 flat headed bolts for a flusher finish (rather than hex heads poking down), I believe this style fastener is used for furniture too incase you struggle to source some. The corner's are a little wider, but this may be an advantage incase I get close to bumping it  The front grill got some attention, finally getting round to repairing it. Upon removal one fixing pulled itself out of the plastic frame, one side is M8 that fixes inside of the frame, where as the other side is M5. Not knowing I could get replacements, I cut down an M8 bolt, threaded it inside the frame along with a decent amount of JB Weld.  The mesh was replaced to match the bumper. One hole on the bonnet/hood had to be drilled out to 8mm to accommodate the new stud, once the glue had set it could be refitted. I think the reason the grill was double meshed was to hide the horn/bonnet latch (which makes sense) but I much prefer it matching the bumper Bumper refitted and it's looking much better IMO The Youtube video can be seen here: https://www.youtube.com/watch?v=bVZP35io9MA
×
×
  • Create New...