Jump to content
SAU Community

Recommended Posts

As an introductory offer on this great new HD On Board Video System, we will do a special deal for SAU members as a group buy on the HDPro RadCam HDPro Race Pack

Full kit including standard mounts, remote control, 12 volt and AC chargers, cables, CAMS compliant Roll Bar Mount & RaceCase. Full kit price normally $780 in Express delivery, australia wide.

The price will depend on how many of you order one. For starters we will give a free upgrade to an 8GB SD Card.

Any starters??? Just leave your forum name here and PM me.

Sample Vid 1 Sample Vid 2

Edited by martyboy26
How much filming fits on a 8GB Card. 1 hour, 3 hours or all day?

2 Hours at the highest 1080P res and much longer at lower settings. You can upgrade to larger card sizes if you like.

Edited by martyboy26
i might be interested. could we get a suction cup too?

Yes. Thats included in the Club Racer Pack or you can buy it separately.

Moved to group buy section.

Mark, also please note the rule for group buys: http://www.skylinesaustralia.com/forums/Th...Gro-t81129.html

As an introductory offer on this great new HD On Board Video System, we will do a special deal for SAU members as a group buy on the HDPro RadCam HDPro Race Pack

Full kit including standard mounts, remote control, 12 volt and AC chargers, cables, CAMS compliant Roll Bar Mount or Suction Mount (please specify which) & RaceCase. Full kit price normally $780 in Express delivery, australia wide.

The price will depend on how many of you order one. For starters we will give a free upgrade to an 8GB SD Card.

Any starters??? Just leave your forum name here and PM me.

Sample Vid 1 Sample Vid 2

Just read the Forum Rules on Group Buys, so here's the info:

Start Date: Sept 9, 2010

End Date: Sept 23, 2010

RRP normall $780

Price for all will get cheaper depending on how many sold.

2-5 $702

5+ $624

You can order the kit either with either a roll bar or suction mount.

A 4GB card (1 hour at max res) is suppliedm and you can upgrade to larger sizes if you lie.

Price includes Express delivery, Australia wide.

Payment by Visa, Master Card or Direct Deposit.

Here's a video screen dump of a rather well known car, shot from Glen Seton's BMW at the Muscle Car Masters on Sunday.

If you want more info, please go to http://www.racerecall.com/radcam_hdpro-1.html

post-47107-1283803761_thumb.jpg

I'm in at the 5+ price. Would also like option to upgrade to 32gb SD card, but would like to know what type of kingston card it is.

I am away for work when the GB closes so I'll pm you about payment options.

Hey Mark would you be able to do the 32GB RadCam HDPro Rally Pack as part of this? How much?

I'm also keen on this option if it's possible.

I'm after maximum record time with the option of mounting it to the body with the suction cup or mounting it to the roll cage. Cheers.

Hey Mark would you be able to do the 32GB RadCam HDPro Rally Pack as part of this? How much? I want the whole box and dice.

Sure. just the difference in cost

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...