Jump to content
SAU Community

Recommended Posts

life isnt that hard.... get a screw driver.. remove the screws on the underside of the steering column surround, pull it apart, put your controller inside.. good luck getting it in there and then put the cover back on and use your screw driver again.

How many days have you had now to work it out yourself?

Seriously, it's not hard. I have no idea how to do it, and I can guarantee that if I had my head under the steering column of my car for as long as it took me to write this reply, I would have worked it out.

Put your head down low about bottom of seat level and facing towards the front of the car. Put one of your arms out and under the dash beside the steering column. Then lift your hand up until it touches something, feel around but be careful. You should soon be able to find a place to put it. When you find a place, repeat the above but with the boost controller in your hand, attached double-sided tape between the controller and whatever place you find. Press firmly for about 10seconds. You're ALMOST done. Take your head and body out from the car floor/bottom of seat.

ie. There is nothing to remove next to the steering column, it is all OPEN.

Put your head down low about bottom of seat level and facing towards the front of the car. Put one of your arms out and under the dash beside the steering column. Then lift your hand up until it touches something, feel around but be careful. You should soon be able to find a place to put it. When you find a place, repeat the above but with the boost controller in your hand, attached double-sided tape between the controller and whatever place you find. Press firmly for about 10seconds. You're ALMOST done. Take your head and body out from the car floor/bottom of seat.

ie. There is nothing to remove next to the steering column, it is all OPEN.

haha that just about sums it up dont forget to get out and then close the door :ninja:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Version 1 aluminium airbox is.......not acceptable No pics as I "didn't like the look.....alot" Even after all my "CAD", and measurements, the leg near the fusebox just didn't sit right as it ended up about 10mm long and made the angle of the dangle look wrong, the height was a little short as well, meh, I wasn't that confident that Version 1 was going to be an instant winner I might give Version 2 another go, there's plenty of aluminium at work, but, after having in on and off a few times, and laying in the old OEM airbox without the new pod filter and MAF, there may be an option to modify the OEM air box and still use the Autoexe front cover and filter.... maybe This >  Needs to fit in here, but using the panel, and not the pod, the MAF will need to fit in the airbox though> I'm thinking as the old OEM box and Autoexe cover that is sitting in the shed is just sitting around doing nothing, and they are relatively abundant and cheap to replace if I mess it up and need another, it may well fit with some modifications to how the Autoexe brackets mounts to the rad support, and some dremiling to move it get in there, should give me some more room for activities, as I don't want to move the MAF and affect the tune Sealing the hole it requires to stick it in the air box is simple, a tight fit and some pinch weld will seal it up tight  I am calling this a later problem though
    • and it ends up being already priced in as though you're just on 91RON without any ethanol. Car will lose a bit of economy as the short and long term fuel trims bring down the AFR back to stoich or whatever it is for cruise/idle for the engine.  
    • Oh, you are right. But, in Australia E10 is based on 91RON fuel and ends up being 94RON. Hence it being the cheaper option for economy cars. The more performance oriented cars go for the 98RON fuel that has no ethanol mixed in. The only step up we have left then at some petrol stations is E85.
    • There is a warning that "this thread is super old" but they ignore that anyway...
    • With 10% Ethanol, we're talking 2-3% fuel consumption difference. The emissions reductions and octane boost in my opinion far outweigh this almost non existent loss.    My tanks sitting at 80%. Luckily that should go down fast as I'm on vacation again for the next two weeks. 
×
×
  • Create New...