Jump to content
SAU Community

V35 Auto Transmission, How Good Is It?

drift garage
 Share

Recommended Posts

drift garage Contributor

drift garage

Posted
Posted

HI guys, im looking at buying a v35 and i just wanna know how good is the semi automatic function, i got a mate with a stagea that has the semi auto with the button shift on the steering wheel, but its pretty crap if you ask me, when you rev the car hard and try and shift, it takes forever to shift it just seems lazy, it will also not let you shift down if your revs are too high, which would ruin it a bit in my opinion. but thats the stagea, i want to know how the v35 is and please only comment if you own a v35, not pretend.

thanx guys

V35_Paul Veteran

V35_Paul

Posted
Posted
HI guys, im looking at buying a v35 and i just wanna know how good is the semi automatic function, i got a mate with a stagea that has the semi auto with the button shift on the steering wheel, but its pretty crap if you ask me, when you rev the car hard and try and shift, it takes forever to shift it just seems lazy, it will also not let you shift down if your revs are too high, which would ruin it a bit in my opinion. but thats the stagea, i want to know how the v35 is and please only comment if you own a v35, not pretend.

thanx guys

Only works well with a grounding kit. $80 - $150 about

iamhe77 Grand Master

iamhe77

Posted
Posted
HI guys, im looking at buying a v35 and i just wanna know how good is the semi automatic function, i got a mate with a stagea that has the semi auto with the button shift on the steering wheel, but its pretty crap if you ask me, when you rev the car hard and try and shift, it takes forever to shift it just seems lazy, it will also not let you shift down if your revs are too high, which would ruin it a bit in my opinion. but thats the stagea, i want to know how the v35 is and please only comment if you own a v35, not pretend.

thanx guys

Same transmission. Same delay.

As Paul said, a grounding kit makes a difference but only if it is connected to the trans dipstick bracket.

Also, shift kits are readily available and can be shifted interstate if that is what you want.

Have a look at Wholesale Automatic Transmissions here in Vic. If you send them your valve body, they will kit it and send it back to you for installation. They have told me that it has been used on a rock climber with 473kw without any kind of failure from the transmission... just remember to install a trans cooler as well!

drift garage Contributor

drift garage

Posted
  • Author
Posted
Same transmission. Same delay.

As Paul said, a grounding kit makes a difference but only if it is connected to the trans dipstick bracket.

Also, shift kits are readily available and can be shifted interstate if that is what you want.

Have a look at Wholesale Automatic Transmissions here in Vic. If you send them your valve body, they will kit it and send it back to you for installation. They have told me that it has been used on a rock climber with 473kw without any kind of failure from the transmission... just remember to install a trans cooler as well!

that sux, has any one here done the shift kit on a v35, i've heard about them but do they just reduce slippage? does it help at all with the delay?

scotty nm35 Grand Master

scotty nm35

Posted
Posted
that sux, has any one here done the shift kit on a v35, i've heard about them but do they just reduce slippage? does it help at all with the delay?

I think im the only one to build the re5 over here, Kewish automatics did mine. Its handling 300awkw at the moment but I had to ditch the torque converter lockup.

Shifts instantly now but the stock ecu still drops timing between changes which is a good thing at that power...

R6n350GT Experienced

R6n350GT

Posted
Posted
I think im the only one to build the re5 over here, Kewish automatics did mine. Its handling 300awkw at the moment but I had to ditch the torque converter lockup.

Shifts instantly now but the stock ecu still drops timing between changes which is a good thing at that power...

Just go manual ! If ur buying a V35 then why auto?

drift garage Contributor

drift garage

Posted
  • Author
Posted
Just go manual ! If ur buying a V35 then why auto?

i gotta share it with the wife, for when i take her commodore to tow the race car, and she doesn't drive manual, im trying to find a way around it so i can get the manual!! the only way i see it right now is to put a tow bar on the v35 and use that, that way i can get the manual, cause i don't need the wife's car to tow. but i gotta check the tow rating first before i go making plans.

R6n350GT Experienced

R6n350GT

Posted
Posted
i gotta share it with the wife, for when i take her commodore to tow the race car, and she doesn't drive manual, im trying to find a way around it so i can get the manual!! the only way i see it right now is to put a tow bar on the v35 and use that, that way i can get the manual, cause i don't need the wife's car to tow. but i gotta check the tow rating first before i go making plans.

Just buy her a bus pass when u take her car, problem solved.

VNS 24 Mentor

VNS 24

Posted
Posted

I don't drive manual so I don't know about them.

But I think auto is not that bad either, if not the worse. It goes smooth and can enjoy the car more when cruising around.

Also, if you feel like having abit of fun, all you have to do is step on the pedal. :P

will's35 Enthusiast

will's35

Posted
Posted

Great auto gear box I reckon, It is no Ferrari F1 or BMW SMG2, just put it in D and press the power to button and you will find it a great daily.

Not a good match on the track, but it is fine on winding roads or city streets.=D

peetii Contributor

peetii

Posted
Posted

I find the V35 autos are pretty smooth and responsive, more so in tiptronic mode.

Had an automatic Supra and compared to the V, its quite slow by way of when to downshift and overall responsiveness.

However the tiptronic sometimes won't shiftwhenever you want since the ECU probably protects the engine from over revving.

  • 1 year later...
ballsmyberries Newbie

ballsmyberries

Posted
Posted (edited)

just wondering about this V35 transmission and i got some question regarding to it, i'm currently considering to purchase a v35 "04" with A/T transmission with it, clocked over 140000 km, how reliable are these AT transmission?

Edited by ballsmyberries
Deep Dish V35 Experienced

Deep Dish V35

Posted
Posted (edited)

the weakest nut on any gearbox is the nut behind the steering wheel. the key is to treat it nice, service it regularly, and dont be a tool.

i personally find the auto shifts much better at 3/4 acceleration than when your foot is to the floor. the ecu tends to override manual mode when youre pushing it

and you only really hear about the CVT8 gearboxes being problematic

Edited by Deep Dish V35
projectx Collaborator

projectx

Posted
Posted

In "D" mode the V35 is the best auto gearbox ive come across. Really smooth and 99% of the time chooses the right gear with little delay. In my opinion its better then the 5 speed in the V36 (in auto mode). But in sport mode the V36 one is better.

Howaitonaito Mentor

Howaitonaito

Posted
Posted

The RE4/RE5 gearbox has been around for years (my mates 1988 nissan cefiro has a RE4 box similar to mine only with software change) and is a great box, yeah its not a VW DSG unit but do remember your not driving exactly a small car you are driving a big lazy sedan/coupe/wagon

iamhe77 Grand Master

iamhe77

Posted
Posted

the weakest nut on any gearbox is the nut behind the steering wheel. the key is to treat it nice, service it regularly, and dont be a tool.

i personally find the auto shifts much better at 3/4 acceleration than when your foot is to the floor. the ecu tends to override manual mode when youre pushing it

and you only really hear about the CVT8 gearboxes being problematic

The problematic part of the CVT is probably the nut behind the steering wheel as well.

sonicii Veteran

sonicii

Posted
Posted

The RE4/RE5 gearbox has been around for years (my mates 1988 nissan cefiro has a RE4 box similar to mine only with software change) and is a great box, yeah its not a VW DSG unit but do remember your not driving exactly a small car you are driving a big lazy sedan/coupe/wagon

RE4/RE5 doesn't really define the gearbox type, it really just states that it is an electronic controlled 4 or 5 speed auto box. there were many transmissions that started with RE4, some were good, some weren't, all having signifincant differences. eg. the RE4F02A has the valve body on the top and wasn't known for reliability. the RE4F04A has the valve body on the bottom and was much stronger. the RE4/5 in the V35 is quite different again.. considering it is a RE5R.. (RWD box).

That said, the unit fitted to the V35 seems to be quite good..

ballsmyberries Newbie

ballsmyberries

Posted
Posted (edited)

thanks and appreciated it alots for the information. how to ensure that the gearbox is in tip top condition when i go the the test drive? I've been driving a stick for all my life and I wish to replaced my wife's car with V35.

Edited by ballsmyberries

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • RP1421
      S15 Spec R

      By RP1421 · Posted

      As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • perry_r33
      R34 GTR Vspec Garage Sale - All must go!

      By perry_r33 · Posted

      Pm sent 
    • Robot
      Skyline v36 350GT sedan hunting on idle

      By Robot · Posted

      Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...