Jump to content
SAU Community

Recommended Posts

Hey everyone just bought a r33 at the auctions :D it went for verycheap soni couldn't resist

R33 gtr

1998

103xxx ks

No accident history :revs: and bought from a dealer

So these are my main things

Firstly is the motor is ticking alot. The motor revs out fine no missing etc, The dealer said he doesn't no when it was services last and recons the oil

Is too thin for the motor.. It happined to me before so that didn't worry me . I just serviced it today new

Plugs new oil filter (10-40w royal purple) and it's still ticking not so much as before but still there, havnt taken it

For a drive yet just turned it in for 10 or so mins.

Secondly is the bovs. I can't here the schoooosh that it's ment to make but at huger revs I can hear dose. Pulled the front bar off intercooler etc cleaned all the piping and assembled back together and still doing it. What's causing the dose???

Thirdly vibration: I've uploaded a video I hope this help but between say 1200rpm and 1800rpm there is a strong vibration

That travels into the cabin. But after 2k it's fine all the way through I was think engine mount or somthing?

And lastly suspension knock , there is a slight knock some where in the front right if the car, only happind when driving straight and

Turning right, bushing?

If anyone can help but troubled

Cheers everyone :P

you are used to the stock GTsT whipper snipper BOV?

GTR sounds nothing like it,

you like the flutter or you want to stop it?

there is a sound deadener/padding inside the airbox, check this is still there,

It's got hks pods

I don't want the flutter just a clean shhhhhh right now it how DOOO DoOo doo

I herd another gtr sound like that too I thought they sound like the gtst

is the sound coming from inside the car or from the engine bay?

can you see the engine shaking violently?

have you checked the engine and gearbox mounts,

does it do it with the clutch in?

Ticking could be a noisy lifter; does it sound like a diesel engine at idle but you can't hear it when you rev it?

GTR bov's sound nothing like GTST bov's, but what you're hearing isn't dose.

Checking the mounts this week still does it clutch in or out

And yes sounds like a diesel motor when idle ing can sorta hear it when reved up.

My main concern is the vibration.

It's more inside vibration then out side and only between 1200-1800 rpm it's werid

TBH with the problems you are describing, i would take it straight to a local mechanic who is familiar with GTR's. The sounds you are describing could be anything from injectors to bearing knock, if so every km you drive it is doing more damage.

It's more inside vibration then out side and only between 1200-1800 rpm it's werid

Sounds like something inside the cabin (door/dash panel, etc.) is hitting its natural frequency which will cause it to resonant. This is usually a result of mechanical looseness. Go over all your interior trims and make sure the bolts/pins are secured properly.

^^

Yeah I agree, sounds more like something in the interior which is virating at that particular rpm. Get someone to move around the inside of the car while you hold it there, and try to isolate exactly where it's coming from.

Everything feels in place and firm ;)

Definatly something from the motor side replacing all mounts tomorrow and will see how it goes

So the bovs and sussy knock is sorted

Anyone have advice for the ticking?

Cheers

TBH with the problems you are describing, i would take it straight to a local mechanic who is familiar with GTR's. The sounds you are describing could be anything from injectors to bearing knock, if so every km you drive it is doing more damage.

Took the words right out of my mouth.

Rather than speculating, and considering you don't know the cars history, get it to a reputable GTR workshop and have them complete a major service and comprehensive checkover.

the ticking will be the injectors or the fact it has solid lifters

you can shove all the chemicals you want in it but your are wasting your time

GTRs naturally have that sound and its just how it is

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Power steering is probably because someone has nuked the HICAS CU and you no longer have the variable power asist doing what it is supposed to. How much boost are you running? You are aware that any more than 10 psi on the stock ECU is just asking for it to go to full R&R (that's Rich & Retard, which is effectively Retarded and Retarded!) which kills all the power. Depending on the exact conditions, it can just be runnign on the fat and stupid end of the maps, then the conditions change, you make a little more boost and the ECU goes into panic.
    • @BuiltNotBought Just as GTSboy said.   If you want driveabilty and more low down torque..keep the stock runners. They are VERY good from a factory. I have them too on my RB25DET NEO and as a GTSboy i have fmic but with stock piping route(i have Blitz intercooler) Iam making around 320 BHP and the car pulls "hard" from like 2,5k all the way to 7k. I have it dyno tuned to mimic N/A power curve and making little less max torque due to the smallbox tranny. But driveability is very great. I had 350Nm below 3k so car feels very quick.   EDIT:  Not my channel but i saw this and i know that is what i want (and i have exactly this)  
    • Looking to sort out a couple of issues on my skyline  It recently was rebuilt, however rebuilder long story short did not give two flying effs about the work he did. So moving forward it's running but I have two persistent issues 1) it has a misfire / lag type of issue (was at higher RPMs but I had a dead piggy back ecu removed which improved it) now it's not as bad but still does it at random, I thought it may have been a boost issue I'm running an older turbosmart dual stage controller, turbosmart told me to try running off gate pressure however it still has a lag at random times. It has New MAF, maf plug, coil packs, sparks, CP harness.. injectors tested and cleaned. Factory ECU. 2) Power steering issue. It is tight as anything. Flushed power steering, rebuilt my pump because the bearing was shot. Flushed again still tight (mainly when parking and going slow into my driveway etc)  No kinks in hard lines, replaced the lines I could see had cracks. Still tough to steer.  I was told to shim a coin and place into the solenoid plug? Is there anything else. My steering angle sensor also has a issue. It's a used one I replaced, does it need to be calibrated? I feel like I've tried everything and this car is my voodoo doll.   
    • Holy shit... wow!!! I totally missed this
    • One main filter. Each tank has a prefilter to keep rocks and small children out, then the big main filter that also does water separation. Clogged the first one so bad it was like a rev limiter at 3200rpm. Literally just like dropping the throttle off and maintaining rpm!
×
×
  • Create New...