Jump to content
SAU Community

Recommended Posts

Hey all, done a lot of research about which oil pump to use, then found this:

http://cgi.ebay.com.au/NISSAN-RB-SERIES-HI...=item20b3e94e13

Anyone seen/heard of/used one of these??? If so, good or complete sh!t???

Looks very similar to a G-reddy/nismo style pump.

Obviously would love to get a Tomei, but cannot afford one.

Any info on these good or bad would be very helpful.

Thanks, Dave.

Link to comment
https://www.sau.com.au/forums/topic/338110-rb-high-flow-oil-pump-no-brand/
Share on other sites

i was about to ask a similar question as i just found this one. http://cgi.ebay.com.au/ws/eBayISAPI.dll?Vi...e=STRK:MEWAX:IT

possibly a cheap batch from overseas or something local that would be worthwhile? otherwise i'm considering some billet gears for $370

Hmm, Nismo, Jun, Nitto etc all use the shark-fin outer. This pump looks very similar to Nitto and G-reddy pumps, as they have a similar 8-bolt backing plate flange.

Nitto Pump:

Key I guess is the width of the gears (std 11mm) and material.

Is there noone that has used these pumps before?

log in - yea I saw that one too, looks like the same pump - they look ok, but I guess that means f*ck all. Where can you get billet gears for $370?

just had a look and the company is no longer around but JPC sells them for $350

^^ lol why would anyone touch it with their dick?

so you could f*ck it before it has the chance to f*ck your engine.

why would anyone ever take a risk with such a critical engine component. It will end up bad money chasing bad money.

wow ebay can sell some pritty crapy stuff, but if its cheap enough than why not have a go..... when your talking about somthing like a deck chair or a cheap socket set..... but somthing like a Oil pump for a freshly built motor..... Dude just buy a nitto.......

If in fact it is a proper billet oil pump the same as a JUN/Tomei/Nitto then awesome.

Because it would be about Fu(king time good pumps were sold for a realistic price.

Whats interesting is the cost of a 2JZGTE genuine pump and their actual spec. Plus their reliability is second to none. How much? $300 delivered from USA.

Yea, it's quite funny, all of you have just replied exactly what I have gone over in my head - why take a risk like that with an untested product? But then, if it is modeled off a Nitto pump, and has the same quality gears, at a price like that, then how can you go wrong?

Tough decision, I have asked all who are selling them on e-bay to elaborate on the gear size/material so will see what they have to say.

I have pretty much made up my mind on the billet gears for my N1 pump though - roughly the same price for known quality results.

But as N1GTR said, there is no reason we should be able to get a quality pump at a reasonable price.

if you think these big companies make the stuff in house then your off with the fairies, there is quite a possibility it is straight out the back door of the same factory the others are from. I buy cranks from a company that supplies a few majors @ 1/4 the price.. there are other options you just need to validate its source.

if some-one buys it in vic im happy to compare the gearset to a genuine GREDDY item, it would be worth getting the gearset tested.

^^ Agreed..and after comparing all pictures of the genuine 'nitto ' casting and these ones...front and back looks identical everywhere and the only difference i

can see is the rear plate is dull compared to the genuine nitto & phillips head screws used instead of hex.

In fact im going to buy one and get the gears tested for material & hardness.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Resizing injectors in Nistune can be done a couple of ways, and there are a couple of ways that you can make a mess of it. The tuner needs to be really aware of the effects of whichever approach he uses (either K, or TIM). They are both easy enough to "get the injector size right" to run the engine. But little details like old start enrichment and hot start are affected differently, depending on which boxes you check.
    • Pretty safe to say almost everyone that has tuned their own car has experienced this issue. The difference being that we have our laptop in the car and when it happens, it's literally 10 seconds of tuning to sort it.  Would you be happy to plug in your laptop and sort this yourself? It is a very simple process and there is no risk of harming your engine (if you are worried about that). 
    • Yeah thats the next step now, either they wil or i will take out for a drive to work and go straight their after work and see is we get the same issues 🤞  thought i try my luck here too, never know someone else might have had the same issue but thanks for the reply 
    • Basically your tuner needs to drive it for the 30 min (or whatever) to create the same conditions then check the ECU settings and sensors at that time. They may not be excited to because that takes them 30 min rather than just opening the bonnet and seeing the problem straight away.... Hot start is generally not as tricky as cold start, but there would be a table for fuel enrichment vs coolant temp as a starting point
    • Yeah, they all cant say anything for sure as everything is working fine . Said unable to find an issue untill it stops again. Could mist likely be CAS wiring or IAS valve issue but again not 100%
×
×
  • Create New...