Jump to content
SAU Community

Recommended Posts

hi all,

this is what i have got rb33 series 2 with new plugs new coils, return fmic, full 3 inch s/steel exhaust, running 12 psi with ecu tuned by toshi and and a gen walbro fuel pump. ( had car all serviced and radiator, water pump, fuel filter timing belt etc all replaced) now power is about 190 atw and i want about 260-270 atw

should i upgrade ecu, injectors, and turbo/hiflow my budget is 2-3 grand is this possible? any ideas would be helpful i would like your ideas no matter how little they may be thanks

Link to comment
https://www.sau.com.au/forums/topic/338248-r33-help/
Share on other sites

GCG highflow is around 1700-1800. not sure bout hypergear. maybe get highflow and ecu and run on the limits of the AFM until you have the coin to get a Z32 and injectors as AFM will run out of legs before the injectors

Link to comment
https://www.sau.com.au/forums/topic/338248-r33-help/#findComment-5466724
Share on other sites

For $2000-$3000 - No.

Injectors are $700-800, ECU + tune is at least $1500.

$2300 before you even start with the turbo, fitting, new dump etc. Then comes the clutch and everything else.

You need at least 5k realistically maybe more.

Link to comment
https://www.sau.com.au/forums/topic/338248-r33-help/#findComment-5466730
Share on other sites

hi all,

this is what i have got rb33 series 2 with new plugs new coils, return fmic, full 3 inch s/steel exhaust, running 12 psi with ecu tuned by toshi and and a gen walbro fuel pump. ( had car all serviced and radiator, water pump, fuel filter timing belt etc all replaced) now power is about 190 atw and i want about 260-270 atw

should i upgrade ecu, injectors, and turbo/hiflow my budget is 2-3 grand is this possible? any ideas would be helpful i would like your ideas no matter how little they may be thanks

For 2~3 Grand you can get a GT3076R in the new nissan 6 bolt housing. (I think they were for $2300). Or get hypergear to do your high flow, they can make your stockie to pump 300rwkws+. Check their thread out.

Link to comment
https://www.sau.com.au/forums/topic/338248-r33-help/#findComment-5466945
Share on other sites

For 2~3 Grand you can get a GT3076R in the new nissan 6 bolt housing. (I think they were for $2300). Or get hypergear to do your high flow, they can make your stockie to pump 300rwkws+. Check their thread out.

Not one supporting mod listed there. What good is a turbo if you have no other parts to make use of it?

As i said - its a good 5k adventure.

Link to comment
https://www.sau.com.au/forums/topic/338248-r33-help/#findComment-5467072
Share on other sites

Stock GTR 33 Series 1 with below mods.

- Exhaust (High Flow) $200

- PFC (Second hand) $950

- Cam Gears (by Racepace) $350

- Tune $600

With above mods, went from 194kW to 264.5kW

All for $2100.

Everything else on the car is stock (Turbo/Engine)...

Link to comment
https://www.sau.com.au/forums/topic/338248-r33-help/#findComment-5467601
Share on other sites

For 2~3 Grand you can get a GT3076R in the new nissan 6 bolt housing. (I think they were for $2300). Or get hypergear to do your high flow, they can make your stockie to pump 300rwkws+. Check their thread out.

I had a look at that, and was wondering how it fit, as as far as im aware, the GT30R needs a 10mm spacer to clear everything on an RB20/25 with a stock manifold.

How'd they get around that one?

Link to comment
https://www.sau.com.au/forums/topic/338248-r33-help/#findComment-5467855
Share on other sites

I had a look at that, and was wondering how it fit, as as far as im aware, the GT30R needs a 10mm spacer to clear everything on an RB20/25 with a stock manifold.

How'd they get around that one?

Mine was a factory OP6 high flow, every thing bolted back the way it was. the 300rwkws+ high flow I referred to was the so called "pu high flow" which comes with a .82 OEM pattened turbine end. From photos all it needed was a oil feeding line like all their other high flows. It runs on factory comp housing so I guess spacer is not needed. Have a read in their thread, lots of information:

http://www.skylinesaustralia.com/forums/Hy...ce-t261613.html

Link to comment
https://www.sau.com.au/forums/topic/338248-r33-help/#findComment-5470036
Share on other sites

Whilst it makes 300rwkw, the power band is not that of say a GT30 which has a good 1000rpm extra to play with.

Horses for courses i guess and many factors one must consider when purchasing a turbo.

Yeah a turbo might make "X" power, but the real point is just how it makes that power. Is it responsive, how much RPM do you have to work with etc.

Link to comment
https://www.sau.com.au/forums/topic/338248-r33-help/#findComment-5470050
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
    • I believe @Duncan has given it a crack at Mt Buller before (in actual race conditions)
    • All my Polish car culture insight comes from watching Nightride. So I half expect this to get 1UZ swapped eventually?! Are you going to drive it in winter? I'm always curious how ATTESA would hold up in the snow. There isn't that much opportunity to try it in Australia.  
    • My steering lock unit on my Infiniti G37 has failed. The car is a local 2012 Infiniti G37 (Q60 ) I need to replace the unit My local mechanic said i need to buy a complete steering wheel assembly. Does anybody no any mechanics in Gold Coast or Brisbane who can fix this issue or where i can buy just the Steering lock control unit. Thanks
×
×
  • Create New...