Jump to content
SAU Community

Recommended Posts

  • Replies 61
  • Created
  • Last Reply

Top Posters In This Topic

Yeah the r33 probably different cause mine hangs low and its put perfectly and note this was after I even modded the dump pipe higher to push the exhuast up as much as it goes and its still pretty low.

Curiously does anyone have a regu 92-z system? Wondering if these older systems have the silenced in the rear cannon as well. I believe this was the model preceding the 06 & r system

i'm sure the 92z do as well, but i dont know about the 96r. 96 is louder than 92, i'm not sure what the physical difference is between the two, it might just be a difference in terms of the size of the strictor, or that one has restrictor one doesnt

kakimoto states on their website that 06R is a hybrid of 92z and 96R + the titanium looking tip

but i was told that 06R is just 92Z with the ti look tip, the db rating on kakimoto's website is 93db for 06R, so it kind of makes sense, but i've never compared it before

Edited by chiksluvit
  • 2 weeks later...
  • 9 months later...

In regards to difference well when I took my car checked with the regu06 fitted when it still had the restrictor it was definately causeing a restriction it did not like the extra timing I had in my tune from my previous exhuast and it was pinging I havent had it put on dyno with no restrictor but in regards to how it feels certainly feels alot more responsive and free revs better and seems to boost better.

In terms of noise yes it did get alot louder as suppose to before its not quite as loud as my old one which was is a stright pipe exhuast with a cannon on the back but its still much louder than it was with the restrictor so that middle muffler on it doesnt do shit lol thats why they stuck a reducer in it.

Now I see why racepace wanted 3500 for a custom exhuast that would flow and be quiet cause its not possible to find one for cheap as this kakimato has shown.

any more updates?? any dyno time, worth doing?

does an oval resonator restrict flow over a hotdog type one? and what size dump pipe should be used with gt30's, does the flange support a 3inch only or could it go upto 4 inch?

Edited by SliverS2

Well without the restrictor the old timing that it had could be added back in was a difference of around 10 kw

what was the max power your car pulled with and without the restriction?

10kw from 300kw is actually not as bad as say 10kw from 200kw..

Edited by chiksluvit
  • 5 months later...

update: removed the restrictor out of the kaki regu today, definately is louder, havent driven at WOT yet as i wanna get it on a dyno to make sure its all good first

took some pics on the way incase someone is thinking of doing the same, took about 2hrs all up from removing the exhaust to re-fitting it, used a dremel to cut it out, the restrictor as mentioned is 2.5" and roughly 20cm long

th_806005b0.jpg

pic of the restrictor inside

th_3e7e8ba5.jpg

restrictor cut

th_4b559844.jpg

restrictor removed

th_381c633c.jpg

restrictor next to zorst

http://s234.photobucket.com/albums/ee47/bwrgtr/?action=view¤t=748ba40c.mp4

quick vid of the exhaust note, its got more growl in low revs, havent tested high revs yet

Edited by BWRGTR

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
×
×
  • Create New...