Jump to content
SAU Community

Recommended Posts

Hi guys this is my 1st post on this part of the site

I Have a V35 skyline which is balicaly stock apart from a nismo catback, DBA 4000 slotted front discs with Ferodo DS2500 pads and whiteline swaybars front and rear

The current wheels/tyres I have been using are KU19 245 40 R19 on the font and Federal 595 RPM 285 35 R19 on the back

Now the 1st time I went to the track I without the swaybars my biggest problem was inside wheel would light up when going around a corner "open diff + worn KU19s 275" anyhow the Federal 595 RPMs have fixed this problem to a degree

The problem I have now is that even though I have it set to the softest setting the whiteline swaybar on the front seems to be making the car understeer more which was sending my VDC into overdrive causing it to constantly grab the front left brake. Now the front tyres arent that far off the ware markers which was also something that would have contributed

I am happy with the way the rear or the car is behaving, yes I can still get it to step out if I want to but it seems to grip enough to keep me happy + I have a proper quaife LSD on the way

However I was thinking about buying a pair of 17 or 18" rims and throwing some R compound tyres on them and running them up front to try to reduce the understeer

The stock rubber/wheels for the front of the V35 is the same as the 350z

however I have 2 wheel/tyre stickers on the inside of my door one from japan and one which looks like a compliance sticker which have the same specs for the 17" rims but slightly different for the 18

iv attached pics of the stickers

if anyone could give me advice on what size tyre/rim to run on the front it would be great

I dont want to go less than the 245 im running now but I guess a slightly smaller size with a R compound would still be heaps gripper

post-9102-1286417562_thumb.jpg

post-9102-1286417569_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/339531-need-advise-on-r-compound-tyres/
Share on other sites

Yes Iv turned vdc off and the car was 2seconds quicker however the lack of front end grip was a pain in the ass and contributed to me coming off the track a couple of times. Not sure how u mean running r compound on the front is such a bad idea. The federal 595 Rpm are pretty dam sticky for a raod tyre treadware is 160 and I didn't have any Issues with the back kicking out unless I wanted it to which only happend on the hairpin

Have you had a decent wheel alignment done? Perhaps have a chat to the aligner and tell them the issues you are having. Poor turn in, poor mid corner grip, feathering and bluing of outer edge, inner edges overheating, etc

Yes Iv turned vdc off and the car was 2seconds quicker however the lack of front end grip was a pain in the ass and contributed to me coming off the track a couple of times. Not sure how u mean running r compound on the front is such a bad idea. The federal 595 Rpm are pretty dam sticky for a raod tyre treadware is 160 and I didn't have any Issues with the back kicking out unless I wanted it to which only happend on the hairpin

i would say running r's / non-r's around the car to correct a handling fault is a band-aid solution. might be a bad idea; like running cross plys and radials at the drag strip (ie. it's a big no no and disallowed). might work though, goodluck with it.

Edited by LSX-438

At the same time though its not like the cars understeering when im driving it around town or anything, its only when im pushing it to the limit that im having issues. To give you an idea of how hard im pushing it im lapping 2 seconds slower than a 350z thats supercharged 220rwkw~ + r compound all round + brembos

if you read my 1st post ull see that my cars stock apart from DS2500 pads on the front a catback and the swaybars I dont even have a LSD yet LOL

seems like you have already made up your mind then, but the fact the car is faster with the standard sway bar on tells me that your aftermarket one is not matched to the rest of your set-up.

At the same time though its not like the cars understeering when im driving it around town or anything, its only when im pushing it to the limit that im having issues. To give you an idea of how hard im pushing it im lapping 2 seconds slower than a 350z thats supercharged 220rwkw~ + r compound all round + brembos

if you read my 1st post ull see that my cars stock apart from DS2500 pads on the front a catback and the swaybars I dont even have a LSD yet LOL

At the same time though its not like the cars understeering when im driving it around town or anything, its only when im pushing it to the limit that im having issues.

This is how it works - you only notice which end has less grip when you push it to the limit.

+1 for stock front sway bar. Or if the rear is adjustable as well, make it stiffer. The outer holes are soft, inner holes are hard.

Unfortunatly I ditched the stock swaybars so im stuck with the whiteline ones, im kicking myself for this now. The reason I did this was because I kept my swaybars for my old 180sx and ended up throwing them in the bin after I sold the car as the whiteline ones were way better. Unfortunatly this dosent seem to be the case on the V35 or more so the VDC system is based around the stock swaybar and goes into overdrive with the stiffer swaybar. VDC is good because it keeps the car on the black stuff no matter how stupid you try to drive the car. On the other hand turning it off = a faster time but if you push too hard you can come off the track

Lift the rear of the car up a little, or lower the front (5-10mm). Either way.

What pads in the rear?

LSD and bit of trail braking will help it turn.

The characteristics sound similar to my car. In that I have chewed up a set of front 595rsr (onto second set) while the rears are still going strong (still on first set).

Bit or trail braking and steering using the right foot seems to work well at winton.

I would try for a 595rsr. Wide as you can get on front, 245. I will be trying that next tire set, if I can.

Lift the rear of the car up a little, or lower the front (5-10mm). Either way.

What pads in the rear?

LSD and bit of trail braking will help it turn.

The characteristics sound similar to my car. In that I have chewed up a set of front 595rsr (onto second set) while the rears are still going strong (still on first set).

Bit or trail braking and steering using the right foot seems to work well at winton.

I would try for a 595rsr. Wide as you can get on front, 245. I will be trying that next tire set, if I can.

The LSD im getting is Quafie so its Helical and acts as a 1 way LSD, the V35 is my daily and I didint want a clunky 1.5/2 way mech diff

still using stock struts/springs so cant change the ride height

Dont have any plans on turning the car into a serious track/time attack car but I do want to be able to get around quickly enough given what the car is, wednesday arvo sprints for me is just a fun day out. Hence the band aid solution

If you are *2 SECONDS* faster with VDC off, then drive with VDC off..... 2 seconds is a MASSIVE difference around QR. Does the car still understeer lots without the VDC getting in the way ?

Now that I think about it I dont think the cars understeering that much, the VDC is however going hyper and constantly grabbing the front left brake which is making the car feel like its understeering more than it is. I like VDC because no matter how stupid you go through a corner its pretty hard to come off. However it slows the car down so thats the other reason why I want R compound on the front so I can have VDC off and have a better chance of keeping the car on the track.

It's understeering, so, if you feel like you're going to head off the track, just ease out of it a bit. I felt that worth mentioning, sounds like you go off quite a bit!? ;)

haha only a couple of times :D

Get the diff installed, it'll fix the inside wheel spinning issue.

Then you can set your sway bars correctly so you don't have to put up with the understeer resulting from your current compromised settings

Then get semis all round if you still feel the need.

The problem with going an r compound on the front only is that for a few laps it'll be great and then the rears will start to over heat and lose traction and before you know it you will be backing it off the track when the rear suddenly lets go at turn in.You will be faster for a couple of laps though. You're also going to destroy the semis as you won't have the right wheel alignment, plus the inherent understeer issue, so it'll chew up the outside of the tyre in no time. 1000 bucks worth of semis might last you 3-4 days.

Get the diff installed, it'll fix the inside wheel spinning issue.

Then you can set your sway bars correctly so you don't have to put up with the understeer resulting from your current compromised settings

Then get semis all round if you still feel the need.

The problem with going an r compound on the front only is that for a few laps it'll be great and then the rears will start to over heat and lose traction and before you know it you will be backing it off the track when the rear suddenly lets go at turn in.You will be faster for a couple of laps though. You're also going to destroy the semis as you won't have the right wheel alignment, plus the inherent understeer issue, so it'll chew up the outside of the tyre in no time. 1000 bucks worth of semis might last you 3-4 days.

Could you please elaborate more on the wheel alignment? V35/350z are heavier cars than the R series skylines

The car drives straight so I havent taken it in for an alignment yet but was going to get it checked anyway when I fitted new tyres to the front of the car which isint that far away

The car drives straight so I havent taken it in for an alignment yet

Tracking straight has nothing to do with a suitable wheel alignment for track. If there is any adjustment, then a track setup would have a bit more camber, possibly slight toe out at the front, and more castor (if that's adjustable). These will all make the car track worse than you good "street" aligmnent, and probably wear tyres a bit uneven. Quite a few people will do this for track days (again, assuming the car has adjustment)

I'm going out on a limb here but how experienced are you at driving? Have you spent many hours belting cars around a race track, or is all of your experience from playstation? Not meaning to be offensive, it's common these days for track day newbies to go balls out, because that's what PLaystations teach us about driving. In the real world, this translates to cars sliding off tracks regularly. Of course there's nothing wrong with spitting the car off the road once you're going as fast as the car is capable. However, just because you went off doesn't mean you reached the car's limits.

If it were a standard car with healthy suspension, I'd suggest to learn to drive it properly. If it's happened since changing suspension settings, I'd suggest you might have upset the balance of the car. In either case, running different spec tyres front to back is only going to mask the real issue, and should be considered as the last option.

Initially, maybe try to keep the red mist at bay, and learn to drive the car fast. This won't happen on one or two track days though, and you might even need to take some driving lessons. I'd be surprised if the V series of skylines had inherently bad handling traits on a race track. They may not be the best behaved car out of the box, but if it's spitting you off the track regularly, then look at your own driving first.

Just something to ponder

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So, I started this repair and got as far as "fixing" the holes with some fibreglass. God all those years working on boats came back quickly. I decided I'd reach out to some rust guys just to see what they would say about it. I came across a guy about 40 mins away and went to see him. He said the windscreen needs to come out, that there might be some more bits around the windscreen and he'd quote them at the time. But his quote was $300 to remove and replace windscreen and $3k for the damage he can see. He said he could respray the roof for $1200 and the bonnet for another $800 (somebody has previously rattle canned it, its horrendous). This is $5300 + any small additional bits. It's a lot, I get that and the name of one of my fave youtube channels 'Not Economically Viable' comes to mind.  I'm not being financially rational, but I've taken him up on the quote. He's opening a new shop in November with more room, so we're waiting for that. I'll leave the currently missing headliner out until then. I'm looking forward to it being fixed and having the paint looking nice again (lots of clear coat issues on the roof too). / flame suit on.
    • Oh and some up-and-comings; New rear drivers wheel bearing. I'll do that this weekend while the diff is out. The car is already up and the d/c axles and missing exhaust will help with space. This is the last bearing for me to do and I've been dragging my feet on it. I also have some new EBC blue stuff pads for the car and some new brake fluid. I haven't ever flushed the fluid in this car and looking forward to it. I have 600 degree fluid to put in. Not exactly "race fluid" but better than the typical stuff I have been using.
    • A proper clutch/plate type mechanical diff with quite a lot of pre-load and high locking % is better for drifting. Much more consistent in its behaviour. A helical can be annoyingly vague and inconsistent in how it responds under the sorts of abuse found in drifting.
    • Some updates here. I pulled the entire interior out, minus some trim to respray the seats with Colourlock dye. It turned out really nice though I accidentally let the dog in the car after and she scratched up the front seat.  This is what it looked like before, the colour was just washing out everywhere but thankfully the leather was in good nic. Then after the respray   And after the bloody dog jumped in The headliner is out waiting to be retrimmed, but it will stay out now until Nov - see why below. I replaced the stereo/headunit with a period-styled Android headunit. I have no after pics, but I'll get some. This is because of the missing pixels. I tried to fix this twice with replacement ribbon cables but couldn't. Also the bluetooth interface I'd bought for this was crap. Then there's the rusty roof. Pics and info in this other thread. I have decided to get this repaired professionally, but I'll update that thread. This is why the headliner will stay out for now. I'll be getting the roof and bonnet resprayed at the same time the rust is fixed. I also had an interesting issue with my drivers door lock.  For a small period I was having issues getting any 12v power to the car - I mean *any*. It would have no dash lights, nothing. It happened while I was at the shops and I couldn't get in the car. So, we had 2 problems. The most pressing here is that I was locked out. I have only a single physical key hole on the car, the drivers door and no amount of turning would unlock the car. Surely it doesn't need power for this? The second issue is why am I losing all power periodically, The battery isn't dead, its almost like the battery isn't even there. Two issues that were surprisingly easy to fix. You fellow BMW over-engineering lovers will appreciate this. The lock in the door has 5 states; mechanical lock, electric lock, neutral, electric unlock, mechanical unlock achieved at -90 degrees, -45 degrees, 0 degrees, 45 degrees and 90 degrees. Although, the unlock is towards the front of the car, so opposite for LHD countries. Sticking the key in and turning 45 left or right is what is used 99% of the time. It activates the central locking etc. 90 degrees is for dead battery access and, obvs, only un/locks the one door. But because the mechanical lock is never used and is 27 years old, it seizes up. I was totally unable to turn the key far enough to get to the mechanical unlock (At the time of locking myself out, I didn't even know this was a thing). I eventually did it with some vicegrips and teflon spray.  I made a quick vid for other E39 peeps.   The battery issue is totally new to me also - It wasn't making sufficient contact between the post and the terminal. The terminal was bolted on tight, but the car wouldn't have power. After checking the battery with my multimeter I accidentally contacted the terminal and the battery post and the car got power. The battery was only a few years old and in good condition. I cleaned the post and the terminal with a wire brush, bolted it back on tight and never had the issue again. I'm still surprised that despite having solid contact it didn't work. Also, the car was getting Warragamba sized pools of water in the back when it rained. My initial concern was another rust problem. But when I went out on Weds while it was raining and while I had no headliner in I could see a steady stream of water coming through the roof mounted aerial. As this aerial is for the (now removed) car phone I pulled it out and whacked a blanking grommet in the hole. It seems fine now. I'm thinking I might get the hole permanently filled when the rust is fixed. Moving forward and things in progress; The tailgate needs some attention. I have taken all the trim off to clean it all and address some small rust spots. I have partially done all of this but I'll finish it up hopefully this weekend. As all the trim are now entirely devoid of trim clips I have bought a heap of strong velcro and I'm hoping it does a good enough job as any of this trim in good condition is super expensive and usually in Europe as we dont have many of the wagons here. Suspension and brakes!!! This is exciting. In the front; New control arms New sway bar links New lower Eibach springs (the only modification I'm planning on this car) M Sport shocks (these came with the car and will replace the longer shocks in the car) New top mounts Used 540i calipers (stock brakes suck!) New 540i disks and pads (22x296 mm for 528 and 30x334 mm for 540i) New front wheel bearings (thank all that is holy for bolt on bearings!) Annnnd in the back; New control arms New sway bar links Adjustable air suspension arms (fool the car into what the current height is so the self levelling suspension can match the new front ride height) New ball joints I'll also be doing a brake fluid flush while I'm in there. I'm planning on switching the car over to the 16's that came with it so I can clean up and respray the M Sport 17's. They've lost a lot of colour over the years and have some gutter rash. None of this will start until the E90 is back.
    • You mean you will regret it for drifting duties? I don't quite follow.
×
×
  • Create New...