Jump to content
SAU Community

Recommended Posts

A lot of ppl are talking about how there will be a shit load of lag, here is a video that will argue that point with you http://www.youtube.com/watch?v=xnFA93_U9hY

  • Replies 63
  • Created
  • Last Reply

Top Posters In This Topic

A lot of ppl are talking about how there will be a shit load of lag, here is a video that will argue that point with you http://www.youtube.com/watch?v=xnFA93_U9hY

there's no intercooler on that setup. no lag but no boost either.

another bad point. the air intake is under the car where dirt, dust, water will cover the pod filter even if it is covered, id rather not being drawing air from under the car.

Edited by Peter89
not goin to argue how a turbo works . go read a book instead of the internet

on another note of someone came to me and had lots of money and wanted this id be happy to do it and he is obvoiusly happy with it

what books are you reading?? or someone has tricked you were an apprentice no offence.

http://www.davidenglish.com/swift/Tech/Man...old_design.html

scroll down to heat loss . will find more examples on the internet for those retards that havent read a book this year

http://wapedia.mobi/en/Turbocharger?t=8.

read 7.3. Comparison to supercharging

The turbine section of the turbocharger is actually a heat engine in itself. It converts the heat of the exhaust into power used to drive the compressor, thereby providing a more efficient compression of the intake air than can happen with supercharger, which uses up net engine power to drive its air compressor

read a book

you might learn something

hence are all cars tuned lean (>15afr) on spool up

There is a big difference between reading a book and practical experience, if everyone went by the book no one would be experimenting and every one would be doing the same thing, put the book down and pick up some tools.

lol at that video . gave up after first minute

"exhaust spins the impeller" wtf is this a jet unit off a boat or something ?

"air gets compressed here " yeah because air exits a turbo already compressed

your arguin for the sake of arguing . get a life

i made a statement which was challenged and i provided evidence .

will not comment again so dont bother

LOL, a book is evidence? Now find some practical evidence instead of a book that only goes off one persons point of view with no real association to the overall set up discussed in this thread.

It's also worth pointing out that there is a lot of people on here that have real world experience with turbos and don't believe this will work but not one is willing to back you on your 80% theory, that says more than any book you can buy.

gonna side with lachlan on this one about the heat thing (dissagree about all cars being lean for spool though). to put it in its simplest form, heat is a form of energy, if it is all lost before it gets to the turbo, there will be less energy acting upon the exhaust turbine.

that said i do have faith in rear mount sytems and they have been proven to work, and work pretty well in some cases. with correct sized turbos the heat issue can be overcome for the most part.

there was a huge debate on this on NS a while back. short answer, no.

-increased intercooler piping thus more lag.

-increased risk of turbo damage.

-decreased life span of the turbo. whenever it rains the turbo will be sprayed with water. since the inside of the exhaust hosing will be around 900c yet the outside is being sprayed with cool water, the great temperature difference is likely to cause cracking.

-cheaper, easier and more common to do with the correct way.

'lag', even with a front mount and long piping supposedly isnt all that bad from results i have seen/heard about, although i have never driven one. even so 'lag' can be interpereted in different ways, (most of which are wrong IMO) and everyones idea of what laggy is varies. but the general consensus i've found is that its really not that bad.

risk of turbo damage, although increased, really shouldnt be that bad unless the turbos hanging too low, which i would call a bad install, not failure to the basic idea of rear mount turbocharging

life span, turbo will be ALOT cooler if its rear mounted. the same question was also asked to an engineer from garret about reliability when they will come into contact with rain water and he laughed at the person asking it... i've also yet to hear of a cracked housing or turbo failure due to this reason.

as for cost and complexity, i'd say rear mount wins hands down on both. replacing the rear muffler with a small section of pipe will be quite noticeably cheaper than an exhaust manifold/dump pipe/catback. everything else should be pretty much the same, bar the added cost of a scavenge pump. in general you can normally find some decent room under the back of a car compared to a crowded engine bay. if you can get the car in the air to work on it, it would be heaps easier *my opinion*

Edited by VB-

a decent front mount setup that moves the radiator back will have next to no lag.

lag as in the amount of revs it takes after throttle off. good example is my friend recently replaced his crap front mount setup to a custom front mount that moves the radiator back. now, throttle off - throttle on boost response has gone from around 1000rpm to get 16psi to 100-200rpm to get 16psi.

there's no way to get good response to large amounts of piping, these systems will always have more piping therefore poor response. however if a car with a rear mounted turbo has no intercooler boost response might be slightly better then with a front mount however the ability to generate high boost levels is limited.

turbos are more efficient closer to the exhaust manifold. while exhaust pressure forces the turbine to spin, the temperature of the exhaust gas has a vast amount of energy in it. the long large exhaust pipes cool the gas and energy is lost.

if you think spraying water on the outside of the turbos exhaust hosing wont have any negative effects, go ahead and do it.

if you are going to spend thousand on a turbo upgrade (with all the other parts like injectors, ecu and tuning) you might as well do it right the first time. most japanese cars have enough room for one or two turbos in the engine bay. the added cost of the exhaust manifold is worth it for doing a overall better setup.

a decent front mount setup that moves the radiator back will have next to no lag.

lag as in the amount of revs it takes after throttle off. good example is my friend recently replaced his crap front mount setup to a custom front mount that moves the radiator back. now, throttle off - throttle on boost response has gone from around 1000rpm to get 16psi to 100-200rpm to get 16psi.

there's no way to get good response to large amounts of piping, these systems will always have more piping therefore poor response. however if a car with a rear mounted turbo has no intercooler boost response might be slightly better then with a front mount however the ability to generate high boost levels is limited.

turbos are more efficient closer to the exhaust manifold. while exhaust pressure forces the turbine to spin, the temperature of the exhaust gas has a vast amount of energy in it. the long large exhaust pipes cool the gas and energy is lost.

if you think spraying water on the outside of the turbos exhaust hosing wont have any negative effects, go ahead and do it.

if you are going to spend thousand on a turbo upgrade (with all the other parts like injectors, ecu and tuning) you might as well do it right the first time. most japanese cars have enough room for one or two turbos in the engine bay. the added cost of the exhaust manifold is worth it for doing a overall better setup.

yeah actual lag wouldn't be the best, most people these days refer to boost threshold as 'lag', so i responded in kind.

water on turbo, its not like your spraying down a red hot exhaust housing, its a bit of water off the road, and the turbo wil be much cooler.

yes alot of jap cars do have room (well the older ones do, newer ones arent so friendly), but take note of what sort of cars these systems are being applied to. dont take what i was saying as this system is ideal, i agree entirely that a traditional setup will work better, but rear mounts do have their place, and i dont think the drawbacks outweigh the loss in performance for the street cars they're typically seen on.

The ones I have seen run smaller turbos than you would normally, this must be due to less heat (and therefore energy) arriving at the turbo.

I think overall they do offer less performance than a traditional setup but this can be outweighed by other advantages depending on your priorities.

Interesting discussion. In terms of thermodyamics, there is less potential for the rear mount turbos due to efficiency loss at the lower temperature, but that's just the thermodynamics. The extra piping, need for intercooler, specific turbo design (it's NA so not looking for huge boost) etc will all have more effect on determining whether or not it's worth it for any particular project.

the other thing to take into consideration is that these aren't hardcore turbo upgrades. they are simply turbo upgrades for NA vehicles to give them a bit more power.

any turbo upgrade is hardcore. at minimum the car will need new injectors, fuel pump, ecu + tune. plus you can also had other stuff like intercoolers, boost controllers, exhausts. depending on the boost levels, the car might need cooling upgrades. more often then not, wider driven wheels with better tyres.

such an upgrade is going to cost thousands, especially if you get all the parts new. turbo kits alone start at over $1000.

sure you could just bolt it on and hope for the best then again, the cars performance increase would be poor for the money spent and you would risk damaging the car, no doubt from leaning out the engine.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...