Jump to content
SAU Community

Subaru Wrx Sti

TUFF_350

By TUFF_350,
in General Automotive Discussion

 Share

Recommended Posts

warps Mentor

warps

Posted
Posted

I couldn't wait for the WRX sedans to come out, since the hatches were so damn ugly. I didn't think it possible, but the sedan is even uglier IMO.

I ended up buying the hatch and am loving it (09 model with the proper suspension, tyres and power)

I don't think the sedan is any more practical than the hatch, and in fact you lose a lot of flexibility with load carrying. The hatch suits our family duties perfectly, and has taken a few big loads with the back seats folded down. Couldn't have done that with the sedan.

Also, the sedan is 150mm longer, so harder to fit in my garage with the 6m long car trailer in front of it.

Looks? All I can say is they look heaps better in the flesh than on paper, but then again I've spent my whole life driving boring, ugly cars, so I don't have a need for cars that attract attention.

Link to comment
https://www.sau.com.au/forums/topic/341886-subaru-wrx-sti/#findComment-5516121
Share on other sites
VNS 24 Mentor

VNS 24

Posted
Posted (edited)
Hey guys,

as a family type sports car who likes the new sedan version of the STI? Wasnt a fan of the hatchback but i think this model could definitely grow on me!

http://www.redbook.com.au/used-cars/detail...id=12BE8212D553

I am in the same boat as you, Dames. Personally, I love my V35 coupe but will be needing more practical car in 3-4 years time for expanding family, plus abit of turbo power for driving pleasure. :)

For that, I would choose a 2010 STI hatch. They are very spaceable (Groceries shopping, airport transfer, baby pram, etc.), not 100% track purpose like Evo's (Good for city driving and long distance drives), and..oh my god..they are so damn sexy in a flash with those pump out guards. All you need to make it outstanding is a drop, carbon fibre goodies and exhaust. Sure it looks like a done-up Hyundai or Kia, but everybody knows it's a STI now.

The sedan and Evo 10 looks nice too, but not as practical as hatch for my likings. I would only go for a STi sedan or Evo if I have another daily (Hatchback or 4WD) and have extra cash to spend on track works.

Edited by Victor.T
Link to comment
https://www.sau.com.au/forums/topic/341886-subaru-wrx-sti/#findComment-5516553
Share on other sites
VNS 24 Mentor

VNS 24

Posted
Posted (edited)
sedan looks good in this pic, as does the hatch, but once you look at it from other angles then the hatch starts to look better

Subaru-Impreza-WRX-STI-4-lg.jpg

^ +1 for that.

Also, I think, performance wise, hatch is better at cornering and handling as Subaru rally drivers used and prefered the hatch.

Edited by Victor.T
Link to comment
https://www.sau.com.au/forums/topic/341886-subaru-wrx-sti/#findComment-5516592
Share on other sites
TUFF_350 Proficient

TUFF_350

Posted
  • Author
Posted (edited)
I am in the same boat as you, Dames. Personally, I love my V35 coupe but will be needing more practical car in 3-4 years time for expanding family, plus abit of turbo power for driving pleasure. :P

For that, I would choose a 2010 STI hatch. They are very spaceable (Groceries shopping, airport transfer, baby pram, etc.), not 100% track purpose like Evo's (Good for city driving and long distance drives), and..oh my god..they are so damn sexy in a flash with those pump out guards. All you need to make it outstanding is a drop, carbon fibre goodies and exhaust. Sure it looks like a done-up Hyundai or Kia, but everybody knows it's a STI now.

The sedan and Evo 10 looks nice too, but not as practical as hatch for my likings. I would only go for a STi sedan or Evo if I have another daily (Hatchback or 4WD) and have extra cash to spend on track works.

Same boat indeed mate,

would love to stick to imports so hopefully there is some other hot Nissan available within the next few years or i might even jump ship and go Toyota...those Mark 2 IRV's are looking bloody fantastic

in my opinion and will surely only get better! Very VIP-ish :down:

post-35595-1288079328_thumb.jpg

post-35595-1288079336_thumb.jpg

Edited by TUFF_350
Link to comment
https://www.sau.com.au/forums/topic/341886-subaru-wrx-sti/#findComment-5516889
Share on other sites
BoyWhoCriedWolf Grand Master

BoyWhoCriedWolf

Posted
Posted
I am in the same boat as you, Dames. Personally, I love my V35 coupe but will be needing more practical car in 3-4 years time for expanding family, plus abit of turbo power for driving pleasure. :down:

For that, I would choose a 2010 STI hatch. They are very spaceable (Groceries shopping, airport transfer, baby pram, etc.), not 100% track purpose like Evo's (Good for city driving and long distance drives), and..oh my god..they are so damn sexy in a flash with those pump out guards. All you need to make it outstanding is a drop, carbon fibre goodies and exhaust. Sure it looks like a done-up Hyundai or Kia, but everybody knows it's a STI now.

The sedan and Evo 10 looks nice too, but not as practical as hatch for my likings. I would only go for a STi sedan or Evo if I have another daily (Hatchback or 4WD) and have extra cash to spend on track works.

If you are pramming it, get a wagon. There is no way the hatch will be big enough. Most sedans only just cut it.

Link to comment
https://www.sau.com.au/forums/topic/341886-subaru-wrx-sti/#findComment-5516920
Share on other sites
iplen Mentor

iplen

Posted
Posted

Until now there has not been a choice with the rally cars, you either rallied a hatch or an Evo, for me the Sedan wins because it is a little less ugly, and because with the boy racer trolley handle it still looks a little like a WRX of old. Still next to the Liberty/Exiga these things are practically supermodels (a bit like comparing the current prime minister to the old one though)

Link to comment
https://www.sau.com.au/forums/topic/341886-subaru-wrx-sti/#findComment-5516965
Share on other sites
Supra- Enthusiast

Supra-

Posted
Posted

the sedan sti

only looks good in white color, with black wheels,

the other colors makes the back look too much like a daewood(lights, and that chrome bootlid thing between the lights)

i prefer the hatch out of the 2

... still GC8 best looking rex

Link to comment
https://www.sau.com.au/forums/topic/341886-subaru-wrx-sti/#findComment-5516974
Share on other sites
VNS 24 Mentor

VNS 24

Posted
Posted
Same boat indeed mate,

would love to stick to imports so hopefully there is some other hot Nissan available within the next few years or i might even jump ship and go Toyota...those Mark 2 IRV's are looking bloody fantastic

in my opinion and will surely only get better! Very VIP-ish :P

Damn...that's the nicest Mark 2 I've ever seen.

You know you can make it VIP-ish with V36 sedan too. (Trying to keep you in a Nissan team. :down:)

Link to comment
https://www.sau.com.au/forums/topic/341886-subaru-wrx-sti/#findComment-5516985
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • JC71
      new 1.5 LSD issues/concerns

      By JC71 · Posted

      looking for some help and maybe some insight on others experience with a new LSD. R34 GT ran and drove beautifully, but always alot of grip loss due to the open R200 rear end, so I just installed a new 1.5 LSD way into the stock open R200 for a ER34. Simple. Everything seemed right. I test drove for the first time this weekend. as I started to back out the garage the first time slowly with tires straight it sounded and felt like I had a loose or half disconnected drive shaft...that was clucking around loose and shaking entire vehicle, and making it feel like the trans clutch was spontaneously slipping then grabbing very roughly while just letting out pedal slowly. I backed it out went to pull forward with the same noise, shake and slip grab feeling with hesitation, I turned the tires to back out more and then pulled ahead some same thing but worst because of added wheel resistance (which that I expected) puzzled … pulling it back in checking everything over and finding nothing wrong, I tried it the next day. same thing, couldn’t believe how it shook everything again making a terrible noise and making it feel like the trans clutch was slipping and grabbing, but I got it out of garage into the driveway, got it straight, drove forward and then reveres a few times in a straight line everything shaking , causing what felt like clutch slip and grab every time, sounded like right behind front driver tire and I could feel it in the floor board with my feet,... worst right when beginning to let clutch pedal out to engage slightly, shuttering and sounding terrible along the way…I managed to slowly get down the road, babying it the whole way, once I was rolling (out of 1st) seemed to be better and between shifts, then clutch felt closer to normal…not slip/ grab etc., but back down to any stop, straight road or turning, same thing. Made no difference if all tires were straight or if I was turning. All other gauge read out correct. with in 2 miles as planned I reached the empty parking lot and performed the break in procedure that came with lsd, essentially to drive in a figure 8 a bunch.  Did this, binding chattering, and shaking the car the whole way. I drove it back home seemed somewhat normal once I was in straight line and past 10 mph or so, and I know it will “bind” on corners and cause some tires squeal when turning especially from a stop, but when I begin to move it still causes what feels like the trans clutch to slip and jerk badly as well as shaking the entire car, and sounds terrible, that I didn’t expect. I used the fluid they supplied with LSD kit and did the breaking, planning to change fluid as they suggest after breaking, but wondering will it get smoother or less aggressive with use? maybe a 1.5 is just too aggressive for normal road driving?   I have a LSD that I put in my 71 cuda when I restored it, with amazing smooth , quite yet effective results. Different style LSD but that ones a joy to drive. maybe expecting too much from this R200?
    • Matt Z
      SAU NSW - Archies Flame Grille Meet & Cruise to Kurnell

      By Matt Z · Posted

      Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Ozdavroz
      WTAC 2025

      By Ozdavroz · Posted

      Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • bcozican
      WTAC 2025

      By bcozican · Posted

      i will be there 😁
    • patrickxdf12
      Squeaking clutch/throw out bearing

      By patrickxdf12 · Posted

      Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
×
×
  • Create New...