Jump to content
SAU Community

Recommended Posts

  • Replies 62
  • Created
  • Last Reply

Top Posters In This Topic

Yeah I have them and whilst they are reasonably long lasting with decent dry grip for a street tyre, they do have some road noise and suck in the wet if you don't baby it. Access were the cheapest at the time of my purchase. Gonna try Kumhos next time...

Link to comment
https://www.sau.com.au/forums/topic/342179-federals/#findComment-5521075
Share on other sites

Yeah I have them and whilst they are reasonably long lasting with decent dry grip for a street tyre, they do have some road noise and suck in the wet if you don't baby it. Access were the cheapest at the time of my purchase. Gonna try Kumhos next time...

i know ku36s aint great either then again, rwd + turbo. what ya expect.

anyone tried the federal evos? willing to spend that bit extra for half decent wet weather tyres.

Link to comment
https://www.sau.com.au/forums/topic/342179-federals/#findComment-5521359
Share on other sites

Go and see Trackside tyres, Kilsyth, he has the latest Federal Semi out at the moment Z XXXX (XX= something something) :P

They ain't even listed on their website yet :(

Saw them there today and nearly became a guinea pig :D

option1 have been selling them for a while. so a few of the guys up there are running them. or is

there a newer version of these? they do a soft, medium, hard compound I think.

http://www.federaltire.com/en/html/pdetail...ine=5&ID=44

Link to comment
https://www.sau.com.au/forums/topic/342179-federals/#findComment-5521392
Share on other sites

i know ku36s aint great either then again, rwd + turbo. what ya expect.

anyone tried the federal evos? willing to spend that bit extra for half decent wet weather tyres.

Why the need for wet weather grip?

Realistically, you spend maybe a dozen days a year driving in the wet. The other 300 days it's dry. So long as you are careful, a "good" wet tyre vs a "bad" wet tyre isn't going to matter a pinch of shizen. It's not likely that the "good" tyre will ever save you from a sticky situation, so why aim for that? You're more likely to stack when having a fang in the dry.

Get a tyre which best suits the 99% of driving you actually do.

Link to comment
https://www.sau.com.au/forums/topic/342179-federals/#findComment-5521424
Share on other sites

Why the need for wet weather grip?

Realistically, you spend maybe a dozen days a year driving in the wet. The other 300 days it's dry. So long as you are careful, a "good" wet tyre vs a "bad" wet tyre isn't going to matter a pinch of shizen. It's not likely that the "good" tyre will ever save you from a sticky situation, so why aim for that? You're more likely to stack when having a fang in the dry.

Get a tyre which best suits the 99% of driving you actually do.

Whilst I agree with your perspective it depends on the how often you drive the car and how bad the wet weather performance is.

For my daily driver I chose tyres which offered exceptional all round performance, drive brilliantly and cost a fortune (Michelins). I don't use these tyres on my weekend car which I tend to drive the car roughly 1-2 times per month were I use KU36's.

Whilst the KU36's are ok and they are exactly what I expected (great dry grip, slightly stiffer side walls with a little higher NVH) in every way except wet performance. There wet performance is below what I would have expected with little to no feedback and being highly unpredictable.

For someone who drives there car daily I would suggest not using KU36's.

Here is a review which I agree with, particularly in terms of the vauge feedback and how the car suddenly and unexpectedly looses traction.

http://www.caranddriver.com/reviews/compar...omparison_tests

Link to comment
https://www.sau.com.au/forums/topic/342179-federals/#findComment-5521444
Share on other sites

Whilst I agree with your perspective it depends on the how often you drive the car and how bad the wet weather performance is.

For my daily driver I chose tyres which offered exceptional all round performance, drive brilliantly and cost a fortune (Michelins). I don't use these tyres on my weekend car which I tend to drive the car roughly 1-2 times per month were I use KU36's.

Whilst the KU36's are ok and they are exactly what I expected (great dry grip, slightly stiffer side walls with a little higher NVH) in every way except wet performance. There wet performance is below what I would have expected with little to no feedback and being highly unpredictable.

For someone who drives there car daily I would suggest not using KU36's.

Here is a review which I agree with, particularly in terms of the vauge feedback and how the car suddenly and unexpectedly looses traction.

http://www.caranddriver.com/reviews/compar...omparison_tests

But as Peter said, wet + turbo can make any tyre look crap. Wet weather performance is 99% how you drive rather than they tyre holding your rims off the ground.

Link to comment
https://www.sau.com.au/forums/topic/342179-federals/#findComment-5521448
Share on other sites

But as Peter said, wet + turbo can make any tyre look crap. Wet weather performance is 99% how you drive rather than they tyre holding your rims off the ground.

Not true at all. Whilst driver skill always has an effect the difference between good tyres and bad tyres and how well the tyre provides feedback to the driver is paramount to car control.

Tyres are the point of contact between the car and the ground they are the most important factor in car handling, grip and performance for both wet and dry conditions not just holding your rims off the ground or how much throttle you can use on boost whilst going through a puddel.

Tyres are often understated and in particular the value of what a great set of tyres are worth well after the purchase price is forgotten.

Link to comment
https://www.sau.com.au/forums/topic/342179-federals/#findComment-5522006
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...