Jump to content
SAU Community

Recommended Posts

Hi people

I’m going down to Phillip Island in a couple of weeks for Island Magic and am preparing for the worst.

I have found it quite difficult setting up cars to race in the rain as it’s quite difficult to plan test days in the rain. But I have come across a couple of interesting theories and devised my own curiosities about how to get a quick car in the wet. As far as I understand, the idea is to move as much water off he surface of the track so as the tyres contact patch is on as dry a track as possible.

We do not have dedicated wets and will be running Yoko Advan’s AD050.

Aside from softening up dampers, the two ideas I have concern running extra static camber in the wet and increasing tyres pressures in the wet.

Extra camber:

After looking at some old Improved Production photos recently I noticed that the water which has settled on the track seems to be “ploughed” out of the way (similar to a bow wave) due to the angle of the camber.

Now I see a couple of big cons with this. One being less contact patch which means less grip, less braking performance as less of the tyre is in contact with the road (and as the wheel moves into bump more dynamic camber occurs due to unequal length arms) and decreased mid corner grip.

BUT!.. and this is where I need help. Because the contact patch is smaller, there is more weight on a smaller area so more water is moved to the outside of the tyre and ploughed away by the camber. But a decreased contct patch translate to decreased grip!!! So I’m not sure which is fact, which is fantasy. Do the benefits of moving water outweigh the decreased contact patch?

Increasing tyre pressures:

Secondly, by increasing tyre pressure to above normal you again have less contact patch but more weight on a smaller area so water is moved more easily. I’m not concerned about tyre blistering etc. from overheating as the water on the track will keep tyre temps down.

So who has had any experience or insight to this would be greatly appreciated.

If anyone has any other tips for racing in the rain, it would help greatly too.

Cheers,

Cris

Link to comment
https://www.sau.com.au/forums/topic/342547-racing-in-the-rain/
Share on other sites

If its raining at PI and you are driving, I think the most important setup change you have to make is with the driver between the ears...and make sure that at all times the brain remains talking to the right foot :P

I dont buy into all this dry and wet setup talk. If it is a road car running semi slick tyres then you are generally not running anything radical in the way of susp. Perhaps you could do with a degree of camber taken out of the front and 0.5 a degree from the rear...

I actually think its best to just rock up and drive the thing...you will find any issues with your handling that grippy tyres normally hide in the dry. So wait until you get there....if its wet you could learn a thing or two about the character of the car to the point that when you play with swaybars etc it could actually correlate to a quick and nicer car to drive in the wet.

But, if its wet at PI....just pot around and take it easy and drive the thing straight...even in the wet you see some pretty high speeds and a lot can go wrong on wet grass at those speeds :P

If you are at the PIARC day on the 13-14th then come say hello. I will be there in a silver R32 with black TE37s

Edited by Roy

True on higher tyre pressures in the wet, as they will heat up less, so your "hot" pressures will be down compared to a dry track. The otehr thing is that there will be less grip, so less weight transfer and body roll, so you'd tend to run slightly softer springs, part etc.

This is in theory, and I agree with Roy that you'll gain a hell of a lot more by adjusting your attitude to driving. No good being fastest on the day only to spin off on the last lap. I guess that's the beauty of track days though. You can do one fast lap and 20 crappy ones, and still take home the trophy.

Edited by warps

I won't talk about set-up changes or anything but the one thing I will say is the A050's are an incredibly good wet tyre. BUT - you have to have the courage to get some heat into them in order for them to work properly in the wet.

But if you do you will be amazed at just how much grip they have in the wet.

I agree with Roy, Mindset is the biggest gain you will achieve other than having a spare Million to experiment with every option to develop a street car wet race setup.

Good tyres, plenty of Skidpan training may just be the only way we as weekend warriors may learn the finer points of fast wet weather driving whilst staying in control of our vehicles & putting down some respectable times.

Keep us posted

I would not be winding in more neg camber for a wet set-up. you want to take out a bit of camber to get more of the tyre on the road. the car will not be moving around on it's tyres and suspension nearly as much as it does in the dry so you don't need as much neg. and I agree with pressures. hot pressures will be down so you need a higher starting (cold) pressure.

Here's a link from my good Radical friends in yanky land. Radical or not,,,most of it still applys. Oh and a "Nic Link" is a basically a sway bar.

http://socalpeeps.yuku.com/topic/1013/t/EZ-rain-setup.html

Cheers

Neil.

An aggressive dry circuit setup will suck arse in the rain no matter how you drive it.

You want to take camber out.

Toe in not toe out on a wet circuit.

For a a roadie I'd suggest toe in and less camber, stuff around with sway bars to try and balance it all out.

Most important go have fun. Wet weather driving is the best

If you go searching for speed on a wet circuit you won't find it, go looking for balance in the vehicle and the speed will come very easily.

There is a massive amount of changes that can be made but most of it is outside the scope of a road going car with basic suspension mods

lol I've got 1 whole day's experience with wet racing....so here's my tips (very wet, not just damp)

run no camber at all....you will never get the car to roll up onto a tyre anyway. toe in would be nice too.

run heaps of pressure in the tyres. I was running 2 psi more cold than my usual hot target for those tyres before they starting working at all.

didn't get to soften the springs or shocks because they aren't adjustable on my car.

don't bother with a racing line, you won't go any faster no matter which part of the track you run on. just hug the inside, about 1 foot in to miss any puddles at the edge of the ripple strip.

and have good tyres. the guys on dunlop softs were 11sec a lap quicker.

I have only ever done one Supersprint in the rain and truthfully I didnt even bother about the times. Its great fun and learning experience to jsut circulate. I was at a day the other week where it was slick/wet and drying out...I was driving around and learning and thought I was going ok....the give away was the 8-10 cars per lap overtaking me...lol I didnt care. It was still fun and interesting to learn how to drive the car in those conditions....just had to use the mirrors and be sure i was timing my lifts on the straights so as not to hold up the maniacs who were flying in the wet conditions

Edited by Roy

Interesting points you guys raise.

The driver I work work is vey good in the respect he is very calm when he drives and plays smart. Never seen the red mist decend.. yet. So im not tooworied about that..

Im just looking for something thats going to give a little more edge in the rain..

I will deffinately do so Roy if we get the funds to make it there!!

So best thing is to get as much heat into the A050's as possible and they aren't too bad then hey?

don't bother with a racing line, you won't go any faster no matter which part of the track you run on. just hug the inside, about 1 foot in to miss any puddles at the edge of the ripple strip.

and have good tyres. the guys on dunlop softs were 11sec a lap quicker.

Which dunlops? what Track? What were you running? In our category we are allowed to run Michelin Wets.. but shoestring budget team :)

The only advice I say is to keep to the dry race line

I have only ever done one Supersprint in the rain and truthfully I didnt even bother about the times. Its great fun and learning experience to jsut circulate. I was at a day the other week where it was slick/wet and drying out...I was driving around and learning and thought I was going ok....the give away was the 8-10 cars per lap overtaking me...lol I didnt care. It was still fun and interesting to learn how to drive the car in those conditions....just had to use the mirrors and be sure i was timing my lifts on the straights so as not to hold up the maniacs who were flying in the wet conditions

don't sell yourself short brisby. :laugh:

troy and I did some wet sessions at the green hell aka nurburgring nordschleife a few weeks back. with 2 cars (alfa 75 3 litre, caged with semis and a VW scirocco turbo DSG with cage and good road tyres) we had a good play in the wet. it was white knuckle stuff to be sure. in underpowered alfa we were getting swamped in the dry but in the wet I think there were session where barely a single car passed us and we passed plenty... it needed a smooth touch but you had to drive it positively. it responded well when you got some heat in the tyres and drove it through corners on the throttle. that car did have some 'interesting' handling quirks though... anyway bris was pretty handy in the wet. I think just doing the laps we did without ending up in the fence was an achievement in its self. consider that at 24km a single nordschleife lap is the same as a 10 lap session at wakefield and you can understand why you feel knackered at the end of a white knuckle wet lap...

Ok, so you are spannering for a person racing that weekend? Sorry , i have confused Island Majic with the last PIARC Supersprint.

SO what car and category?

RX7 S8 Production Sports

Great Link UWAM!

Thanks!

ahh OK, we are in production touring, have to run tyres from the production car list. Bob Pearson's emo X was running dunlop soft DZ03G.....killed me by miles.

production sports allows slicks right...so hand cut soft slicks are the go. expensive and they will probably go off before you use them. If you are allowed to run semi slicks buy a set of the dunlops, about $2400 for a set 235/45/17

check my youtube for footage from the race, it was terrible!

I actually think its best to just rock up and drive the thing...you will find any issues with your handling that grippy tyres normally hide in the dry. So wait until you get there....if its wet you could learn a thing or two about the character of the car to the point that when you play with swaybars etc it could actually correlate to a quick and nicer car to drive in the wet.

I second this, did an open day at Wakefield and the lowered grip levels gave me a real sense for whether the grip was at the front or the rear of the car at a given point on the track. I felt like I learned a lot, whether it actually helped is another matter but I had an absolute ball.

Regardless of setup, you will learn a LOT from the first day. Hence I think it's even more important that you forget about camber and pressures and so on during the day and just learn to drive what you've got. Once you've got a baseline then the next wet track day you can start fiddling.

progressive throttle application at PI me thinks....but I did find that PI was way better for grip in the wet than some of the other track's in OZ!......as Duncan mentioned driving on line is not alway's the best way to do things(I might add..."especially at EC!").....I find that if I drive around the preferred dry line in heavy rain I find heap's more grip!

the point raised about extra camber and acting like a wedge to push more water out probally won't work as in order for them to push water out they need to grooves on the tyres and once these are full and they can't push out more water you start to aquaplane as the water can't go anywahere.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...