Jump to content
SAU Community

Recommended Posts

Hi people

I’m going down to Phillip Island in a couple of weeks for Island Magic and am preparing for the worst.

I have found it quite difficult setting up cars to race in the rain as it’s quite difficult to plan test days in the rain. But I have come across a couple of interesting theories and devised my own curiosities about how to get a quick car in the wet. As far as I understand, the idea is to move as much water off he surface of the track so as the tyres contact patch is on as dry a track as possible.

We do not have dedicated wets and will be running Yoko Advan’s AD050.

Aside from softening up dampers, the two ideas I have concern running extra static camber in the wet and increasing tyres pressures in the wet.

Extra camber:

After looking at some old Improved Production photos recently I noticed that the water which has settled on the track seems to be “ploughed” out of the way (similar to a bow wave) due to the angle of the camber.

Now I see a couple of big cons with this. One being less contact patch which means less grip, less braking performance as less of the tyre is in contact with the road (and as the wheel moves into bump more dynamic camber occurs due to unequal length arms) and decreased mid corner grip.

BUT!.. and this is where I need help. Because the contact patch is smaller, there is more weight on a smaller area so more water is moved to the outside of the tyre and ploughed away by the camber. But a decreased contct patch translate to decreased grip!!! So I’m not sure which is fact, which is fantasy. Do the benefits of moving water outweigh the decreased contact patch?

Increasing tyre pressures:

Secondly, by increasing tyre pressure to above normal you again have less contact patch but more weight on a smaller area so water is moved more easily. I’m not concerned about tyre blistering etc. from overheating as the water on the track will keep tyre temps down.

So who has had any experience or insight to this would be greatly appreciated.

If anyone has any other tips for racing in the rain, it would help greatly too.

Cheers,

Cris

Link to comment
https://www.sau.com.au/forums/topic/342547-racing-in-the-rain/
Share on other sites

If its raining at PI and you are driving, I think the most important setup change you have to make is with the driver between the ears...and make sure that at all times the brain remains talking to the right foot :P

I dont buy into all this dry and wet setup talk. If it is a road car running semi slick tyres then you are generally not running anything radical in the way of susp. Perhaps you could do with a degree of camber taken out of the front and 0.5 a degree from the rear...

I actually think its best to just rock up and drive the thing...you will find any issues with your handling that grippy tyres normally hide in the dry. So wait until you get there....if its wet you could learn a thing or two about the character of the car to the point that when you play with swaybars etc it could actually correlate to a quick and nicer car to drive in the wet.

But, if its wet at PI....just pot around and take it easy and drive the thing straight...even in the wet you see some pretty high speeds and a lot can go wrong on wet grass at those speeds :P

If you are at the PIARC day on the 13-14th then come say hello. I will be there in a silver R32 with black TE37s

Edited by Roy

True on higher tyre pressures in the wet, as they will heat up less, so your "hot" pressures will be down compared to a dry track. The otehr thing is that there will be less grip, so less weight transfer and body roll, so you'd tend to run slightly softer springs, part etc.

This is in theory, and I agree with Roy that you'll gain a hell of a lot more by adjusting your attitude to driving. No good being fastest on the day only to spin off on the last lap. I guess that's the beauty of track days though. You can do one fast lap and 20 crappy ones, and still take home the trophy.

Edited by warps

I won't talk about set-up changes or anything but the one thing I will say is the A050's are an incredibly good wet tyre. BUT - you have to have the courage to get some heat into them in order for them to work properly in the wet.

But if you do you will be amazed at just how much grip they have in the wet.

I agree with Roy, Mindset is the biggest gain you will achieve other than having a spare Million to experiment with every option to develop a street car wet race setup.

Good tyres, plenty of Skidpan training may just be the only way we as weekend warriors may learn the finer points of fast wet weather driving whilst staying in control of our vehicles & putting down some respectable times.

Keep us posted

I would not be winding in more neg camber for a wet set-up. you want to take out a bit of camber to get more of the tyre on the road. the car will not be moving around on it's tyres and suspension nearly as much as it does in the dry so you don't need as much neg. and I agree with pressures. hot pressures will be down so you need a higher starting (cold) pressure.

Here's a link from my good Radical friends in yanky land. Radical or not,,,most of it still applys. Oh and a "Nic Link" is a basically a sway bar.

http://socalpeeps.yuku.com/topic/1013/t/EZ-rain-setup.html

Cheers

Neil.

An aggressive dry circuit setup will suck arse in the rain no matter how you drive it.

You want to take camber out.

Toe in not toe out on a wet circuit.

For a a roadie I'd suggest toe in and less camber, stuff around with sway bars to try and balance it all out.

Most important go have fun. Wet weather driving is the best

If you go searching for speed on a wet circuit you won't find it, go looking for balance in the vehicle and the speed will come very easily.

There is a massive amount of changes that can be made but most of it is outside the scope of a road going car with basic suspension mods

lol I've got 1 whole day's experience with wet racing....so here's my tips (very wet, not just damp)

run no camber at all....you will never get the car to roll up onto a tyre anyway. toe in would be nice too.

run heaps of pressure in the tyres. I was running 2 psi more cold than my usual hot target for those tyres before they starting working at all.

didn't get to soften the springs or shocks because they aren't adjustable on my car.

don't bother with a racing line, you won't go any faster no matter which part of the track you run on. just hug the inside, about 1 foot in to miss any puddles at the edge of the ripple strip.

and have good tyres. the guys on dunlop softs were 11sec a lap quicker.

I have only ever done one Supersprint in the rain and truthfully I didnt even bother about the times. Its great fun and learning experience to jsut circulate. I was at a day the other week where it was slick/wet and drying out...I was driving around and learning and thought I was going ok....the give away was the 8-10 cars per lap overtaking me...lol I didnt care. It was still fun and interesting to learn how to drive the car in those conditions....just had to use the mirrors and be sure i was timing my lifts on the straights so as not to hold up the maniacs who were flying in the wet conditions

Edited by Roy

Interesting points you guys raise.

The driver I work work is vey good in the respect he is very calm when he drives and plays smart. Never seen the red mist decend.. yet. So im not tooworied about that..

Im just looking for something thats going to give a little more edge in the rain..

I will deffinately do so Roy if we get the funds to make it there!!

So best thing is to get as much heat into the A050's as possible and they aren't too bad then hey?

don't bother with a racing line, you won't go any faster no matter which part of the track you run on. just hug the inside, about 1 foot in to miss any puddles at the edge of the ripple strip.

and have good tyres. the guys on dunlop softs were 11sec a lap quicker.

Which dunlops? what Track? What were you running? In our category we are allowed to run Michelin Wets.. but shoestring budget team :)

The only advice I say is to keep to the dry race line

I have only ever done one Supersprint in the rain and truthfully I didnt even bother about the times. Its great fun and learning experience to jsut circulate. I was at a day the other week where it was slick/wet and drying out...I was driving around and learning and thought I was going ok....the give away was the 8-10 cars per lap overtaking me...lol I didnt care. It was still fun and interesting to learn how to drive the car in those conditions....just had to use the mirrors and be sure i was timing my lifts on the straights so as not to hold up the maniacs who were flying in the wet conditions

don't sell yourself short brisby. :laugh:

troy and I did some wet sessions at the green hell aka nurburgring nordschleife a few weeks back. with 2 cars (alfa 75 3 litre, caged with semis and a VW scirocco turbo DSG with cage and good road tyres) we had a good play in the wet. it was white knuckle stuff to be sure. in underpowered alfa we were getting swamped in the dry but in the wet I think there were session where barely a single car passed us and we passed plenty... it needed a smooth touch but you had to drive it positively. it responded well when you got some heat in the tyres and drove it through corners on the throttle. that car did have some 'interesting' handling quirks though... anyway bris was pretty handy in the wet. I think just doing the laps we did without ending up in the fence was an achievement in its self. consider that at 24km a single nordschleife lap is the same as a 10 lap session at wakefield and you can understand why you feel knackered at the end of a white knuckle wet lap...

Ok, so you are spannering for a person racing that weekend? Sorry , i have confused Island Majic with the last PIARC Supersprint.

SO what car and category?

RX7 S8 Production Sports

Great Link UWAM!

Thanks!

ahh OK, we are in production touring, have to run tyres from the production car list. Bob Pearson's emo X was running dunlop soft DZ03G.....killed me by miles.

production sports allows slicks right...so hand cut soft slicks are the go. expensive and they will probably go off before you use them. If you are allowed to run semi slicks buy a set of the dunlops, about $2400 for a set 235/45/17

check my youtube for footage from the race, it was terrible!

I actually think its best to just rock up and drive the thing...you will find any issues with your handling that grippy tyres normally hide in the dry. So wait until you get there....if its wet you could learn a thing or two about the character of the car to the point that when you play with swaybars etc it could actually correlate to a quick and nicer car to drive in the wet.

I second this, did an open day at Wakefield and the lowered grip levels gave me a real sense for whether the grip was at the front or the rear of the car at a given point on the track. I felt like I learned a lot, whether it actually helped is another matter but I had an absolute ball.

Regardless of setup, you will learn a LOT from the first day. Hence I think it's even more important that you forget about camber and pressures and so on during the day and just learn to drive what you've got. Once you've got a baseline then the next wet track day you can start fiddling.

progressive throttle application at PI me thinks....but I did find that PI was way better for grip in the wet than some of the other track's in OZ!......as Duncan mentioned driving on line is not alway's the best way to do things(I might add..."especially at EC!").....I find that if I drive around the preferred dry line in heavy rain I find heap's more grip!

the point raised about extra camber and acting like a wedge to push more water out probally won't work as in order for them to push water out they need to grooves on the tyres and once these are full and they can't push out more water you start to aquaplane as the water can't go anywahere.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
    • I forgot about my shiny new plates!
    • Well, apparently they do fit, however this wont be a problem if not because the car will be stationary while i do the suspension work. I was just going to use the 16's to roll the old girl around if I needed to. I just need to get the E90 back on the road first. Yes! I'm a believer! 🙌 So, I contacted them because the site kinda sucks and I was really confused about what I'd need. They put together a package for me and because I was spraying all the seat surfaces and not doing spot fixes I decided not to send them a headrest to colour match, I just used their colour on file (and it was spot on).  I got some heavy duty cleaner, 1L of colour, a small bottle of dye hardener and a small bottle of the dye top coat. I also got a spray gun as I needed a larger nozzle than the gun I had and it was only $40 extra. From memory the total was ~$450 ish. Its not cheap but the result is awesome. They did add repair bits and pieces to the quote originally and the cost came down significantly when I said I didn't need any repair products. I did it over a weekend. The only issues I had were my own; I forgot to mix the hardener into the dye two coats but I had enough dye for 2 more coats with the hardener. I also just used up all the dye because why not and i rushed the last coat which gave me some runs. Thankfully the runs are under the headrests. The gun pattern wasn't great, very round and would have been better if it was a line. It made it a little tricky to get consistent coverage and I think having done the extra coats probably helped conceal any coverage issues. I contacted them again a few months later so I could get our X5 done (who the f**k thought white leather was a good idea for a family car?!) and they said they had some training to do in Sydney and I could get a reduced rate on the leather fix in the X5 if I let them demo their product on our car. So I agreed. When I took Bec in the E39 to pick it up, I showed them the job I'd done in my car and they were all (students included) really impressed. Note that they said the runs I created could be fixed easily at the time with a brush or an air compressor gun. So, now with the two cars done I can absolutely recommend Colourlock.  I'll take pics of both interiors and create a new thread.
    • Power is fed to the ECU when the ignition switch is switched to IGN, at terminal 58. That same wire also connects to the ECCS relay to provide both the coil power and the contact side. When the ECU sees power at 58 it switches 16 to earth, which pulls the ECCS relay on, which feeds main power into the ECU and also to a bunch of other things. None of this is directly involved in the fuel pump - it just has to happen first. The ECU will pull terminal 18 to earth when it wants the fuel pump to run. This allows the fuel pump relay to pull in, which switches power on into the rest of the fuel pump control equipment. The fuel pump control regulator is controlled from terminal 104 on the ECU and is switched high or low depending on whether the ECU thinks the pump needs to run high or low. (I don't know which way around that is, and it really doesn't matter right now). The fuel pump control reg is really just a resistor that controls how the power through the pump goes to earth. Either straight to earth, or via the resistor. This part doesn't matter much to us today. The power to the fuel pump relay comes from one of the switched wires from the IGN switch and fusebox that is not shown off to the left of this page. That power runs the fuel pump relay coil and a number of other engine peripherals. Those peripherals don't really matter. All that matters is that there should be power available at the relay when the key is in the right position. At least - I think it's switched. If it's not switched, then power will be there all the time. Either way, if you don't have power there when you need it (ie, key on) then it won't work. The input-output switching side of the relay gains its power from a line similar (but not the same as) the one that feeds the ECU. SO I presume that is switched. Again, if there is not power there when you need it, then you have to look upstream. And... the upshot of all that? There is no "ground" at the fuel pump relay. Where you say: and say that pin 1 Black/Pink is ground, that is not true. The ECU trigger is AF73, is black/pink, and is the "ground". When the ECU says it is. The Blue/White wire is the "constant" 12V to power the relay's coil. And when I say "constant", I mean it may well only be on when the key is on. As I said above. So, when the ECU says not to be running the pump (which is any time after about 3s of switching on, with no crank signal or engine speed yet), then you should see 12V at both 1 and 2. Because the 12V will be all the way up to the ECU terminal 18, waiting to be switched to ground. When the ECU switches the fuel pump on, then AF73 should go to ~0V, having been switched to ground and the voltage drop now occurring over the relay coil. 3 & 5 are easy. 5 is the other "constant" 12V, that may or may not be constant but will very much want to be there when the key is on. Same as above. 3 goes to the pump. There should never be 12V visible at 3 unless the relay is pulled in. As to where the immobiliser might have been spliced into all this.... It will either have to be on wire AF70 or AF71, whichever is most accessible near the alarm. Given that all those wires run from the engine bay fusebox or the ECU, via the driver's area to the rear of the car, it could really be either. AF70 will be the same colour from the appropriate fuse all the way to the pump. If it has been cut and is dangling, you should be able to see that  in that area somewhere. Same with AF71.   You really should be able to force the pump to run. Just jump 12V onto AF72 and it should go. That will prove that the pump itself is willing to go along with you when you sort out the upstream. You really should be able to force the fuel pump relay on. Just short AF73 to earth when the key is on. If the pump runs, then the relay is fine, and all the power up to both inputs on the relay is fine. If it doesn't run (and given that you checked the relay itself actually works) then one or both of AF70 and AF71 are not bringing power to the game.
    • @PranK can you elaborate further on the Colorlock Dye? The website has a lot of options. I'm sure you've done all the research. I have old genuine leather seats that I have bought various refurbing creams and such, but never a dye. Any info on how long it lasts? Does it wash out? Is it a hassle? What product do I actually need? Am I just buying this kit and following the steps the page advises or something else? https://www.colourlockaustralia.com.au/colourlock-leather-repair-kit-dye.html
×
×
  • Create New...