Jump to content
SAU Community

Recommended Posts

i got my car back today with a freshly painted black bonnet, i also pulled the spoiler off and fitted a blitz bov. The car looks amazing now. It looks so much lower and fatter without the series 2 spoiler on i love it.

Oh thanks strutto for the bottle cap mod with the bov it worked a treat hehe.

I didnt have any drama's fitting it which i was suprised becuase im usually quite useless :)

:D

  • Replies 62.7k
  • Created
  • Last Reply

Top Posters In This Topic

  • chaos

    7164

  • Ska

    5791

  • BelGarion

    3645

  • Nexus9

    3590

Top Posters In This Topic

putting the airbox back on, was nothing, i had the stock airbox put away, bov well stock one went back on, cat back, i borrowed adrian's stock catback

cost me 20 bucks for some silicone gasket paste tho to seal up the piping, just the costly bit is repairing the mainfold studs so the exhaust doesnt leak outta the manifold and the block, well the gap between those 2

dunno how much thats gonna cost either

i got my car back today with a freshly painted black bonnet, i also pulled the spoiler off and fitted a blitz bov. The car looks amazing now. It looks so much lower and fatter without the series 2 spoiler on i love it.

How's the BOV sound Matt? Any stalling issues?

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...