Jump to content
SAU Community

Recommended Posts

$3650 each seat WOW!!!

Imagine the cost of rebuilding an entire r32 gtr from scratch with all OEM parts...scales would have to be over 300k lol

And it only cost $110,000 AUS to buy new...

Hi john,

I did what bob did and chased a good passsenger side seat and used it to cover the drivers seat.You can peal off the cover if your careful and patient.

a motortrimmer will be able to stich the side where the mechanism usually sits

Another option is watch import monster.I managed to score a perfect back assembly for $75

And if your real lucky like i was i managed to purchase drivers and passenger seats that had been swapped out for recaros early on,stored in garage and sold seperatley many years later when after car had been sold.

the two seats cost $1500 del to my door from japan

Hi john,

just had alook at import monster, you might be in luck

look under car parts,seats and use bnr32 as the model of seat your looking for.

two days before auction ends and there are no bids.Current price is 1 yen and it's drivers side also

Good luck

My hicas light comes on randomly now and stayon when cold. But every left turn she lights up.

Any ideas?

And after 10 years without having Hicas issues on this car I thought I got lucky!!

Edited by gtr fan

When I had my jdm gtr and removed the engine and box, I had to bleed the hicas system which runs thru a set of procedures...no big deal but it is a bit of a pain.

Good that a simple top up fixed your issue :)

I kicked the old girl in the guts the other day, first start in 3 months, started easy and straight into a smooth idle. I picked up a pair of seats pretty cheap acouple of years ago, not sure how hard a good set of second handies are to find now, some patient, consistant searching may pay off.

Ok guys, any one with their legal hats or registered motor vehicle valuation caps on have any idea about getting a value for legal purposes of my ADM BNR32, inbox replies please rather than pollution of this forum. I believe the value I have been given to be a little on the low side.........................

Cheers in advance Alex

Hi Alex,

I've just deleted my original post as the penny just dropped on the background to your car.

Could you please refresh our memory with the mileage?

What general condition would you give the car out of 10?

Thanks,

Bob.

  • 3 weeks later...

Anyone know where I can buy a replacement high mount stop light? Was the one in the ADM ever standard on the imports?

I just put in a child seat for my daughter and got her to sit in it and try it out and she just reached up and ripped on the case which broke it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • A bit late but A disk S13P fit over stock R32 GTR brakes, usually A disk front, O disk rear works.
    • Or, the height of the release bearing is not correct for your combo. Start with the bleeding and checking the slave moves throughout its range when you press the pedal (2 person required), but it is possible for the height to be internally wrong too (box back off to measure.
    • Yes, there's quite a few things that can go wrong during a clutch install. Very unlikely. I have a similar clutch. They (ACS) make good gear. No, it is not normal. It is possible that you just need to bleed the clutch slave. But the new clutch will also have a more aggressive actuation force/pressure, and so your old slave cylinder might be a bit leaky or otherwise compromised, and not up to the extra force required. Or the master cylinder, same.
    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
×
×
  • Create New...