Jump to content
SAU Community

Recommended Posts

  • 3 weeks later...

Hullo everyone

Still got the R32 and the R30. Sold the Senator and bought a Isusu ute to tow the trailer. Had the 30 out a few times but have decided to rewire it as most of the circuitry is not needed now.

Couple of things.

The arial on the GTR is broken where the rod screws in and I am having trouble sourcing a new one. Apparently they are made by AutoFlex in Germany, not for any particular model or type. Model number is 7 691 2700110001 Universal top 12v. I can get one from UK for $200 but has anyone got a better idea?

Next, I am thinking of a Haltech ECU for the 30. Been told a Platinum ProR32 or a Platinum Sport 2000 will be suitable after minor wiring mods. Any experience?

Lastly, anyone running Flex-Fuel and can you get it easy?

John

Couple of things.

The arial on the GTR is broken where the rod screws in and I am having trouble sourcing a new one. Apparently they are made by AutoFlex in Germany, not for any particular model or type. Model number is 7 691 2700110001 Universal top 12v. I can get one from UK for $200 but has anyone got a better idea? John

Hi John,

No........ No alternative. I did the same. $200 mask as it screws straight in. The exchange rate was a lot better when I bought mine but it was still $150.

The only other thing you can do is use that heat shrink stuff to secure the broken section.

These are the sort of things that i just "suck it up" and pay the money. I've long forgotten about the money but driving around with a busted aerial would do my head in!

Good luck.......

Bob.

Hey Bob et al'

One of my posts from early 2011 was just liked (thanks Vitalikea) which rejogs my mind about our initial chat on organising an ADM meet and cruise...unfortunately it will be geographically challenging for some ppl (sorry Ken) but I think we should still do this :)

My car has been off the road for a year and finally will be registered again next week (fist pumps in the air).

Edited by Marko R1

Hey Bob et al'

One of my posts from early 2011 was just liked (thanks Vitalikea) which rejogs my mind about our initial chat on organising an ADM meet and cruise...unfortunately it will be geographically challenging for some ppl (sorry Ken) but I think we should still do this :)

My car has been off the road for a year and finally will be registered again next week (fist pumps in the air).

Absolutely......... I've been an advocate of this for ages.

What I would like to do now is start a chain of ADM owners who visit this thread.

I'll start - User Name - Real Name and Colour and Location.

1 - Aussie_Delivered_R32_GTR - Bob - Red Wine - North West Sydney.

Brad, I'll grab one mate. PM me your bank det's mate. I'll tfr from my Nigerian account, but really, shoot me a PM.

I'd love a cruise but alas, the gtr is sleeping and will be for a while.

3. Boywhocriedwolf (fkn ash), Ken-wine red mica-Sunshine Coast QLD.

The list looks like this so far......

1 - Aussie_Delivered_R32_GTR - Bob - Red Wine - North West Sydney.

2 - Marko R1 - Marko - Jet Silver - Inner West Sydney

3 - Boywhocriedwolf (fkn ash), Ken-wine red mica-Sunshine Coast QLD.

The list looks like this so far......

1 - Aussie_Delivered_R32_GTR - Bob - Red Wine - North West Sydney.

2 - Marko R1 - Marko - Jet Silver - Inner West Sydney

3 - Boywhocriedwolf (fkn ash), Ken-wine red mica-Sunshine Coast QLD.

For the list

John Murray GTR-059 Jet Silver Merewether

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...