Jump to content
SAU Community

Recommended Posts

So I've had the car for a few days and everything's pretty good but I did notice a few things:

Suspension creaking noises - I was told by the seller (who was told by Andy I think) that due to the "alloy bushes"? used in the M35 the suspension will creak a little when 1st driven?

Turbo noise - didn't get any of this on my way back from Sydney, but now I notice SOMETIMES (maybe 50%) when I hit boost, I get a "rubbing" noise - imagine driving over the rumble strips on the Hume, now speed it up x2. Sounds just like that...

Is something about to die?

Link to comment
https://www.sau.com.au/forums/topic/344214-suspensionengine-noises/
Share on other sites

  • Replies 42
  • Created
  • Last Reply

Top Posters In This Topic

If the bearings are on the way out theres nothing you can do about it, highflow time. I would say most Japanese owners would be getting rid of these before the 100,000k turbo replacement or when noises start.

If the bearings are on the way out theres nothing you can do about it, highflow time. I would say most Japanese owners would be getting rid of these before the 100,000k turbo replacement or when noises start.

So the rubbing noise = bearing failing?

I would think it would sound more...metallic/high pitched?

So the rubbing noise = bearing failing?

I would think it would sound more...metallic/high pitched?

The bearings hold the wheels in place, when they wear, the compressor wheel sometimes starts to rub on the front housing causing damage. If the rear bearing wears, the ceramic turbine blades shatter.

What sort of rubbing noise are we talking about? Sounds like what Cams car used to do when the manifold was leaking too, farting... :rolleyes:

The bearings hold the wheels in place, when they wear, the compressor wheel sometimes starts to rub on the front housing causing damage. If the rear bearing wears, the ceramic turbine blades shatter.

What sort of rubbing noise are we talking about? Sounds like what Cams car used to do when the manifold was leaking too, farting... :blink:

Sounds like when you drive over the rumble strip on the left lane on a highway...speed it up x 2 and you have it.

Does remind me of a very low sounding fart...

I might just have to come around and show you :rolleyes:

Sounds like when you drive over the rumble strip on the left lane on a highway...speed it up x 2 and you have it.

Does remind me of a very low sounding fart...

I might just have to come around and show you :rolleyes:

Could just be the manifold to turbo bolts then, dump has to come off to get to them...

Sounds like when you drive over the rumble strip on the left lane on a highway...speed it up x 2 and you have it.

Does remind me of a very low sounding fart...

I might just have to come around and show you :rolleyes:

Sound is probably caused by the turbo not getting enough air.

I had that exact same sound prior to opening up the intake.

1. make sure you have a high flowing panel filter in your airbox

2. if it still makes the noise, get Scott to make you up a suction pipe LIKE MINE

Edited by iamhe77
get a dry one, i rekon the oiled ones are a bit iffy and MIGHT affect performance by leaving oil deposits on the AFM

+1 on getting a dry filter although the oiled ones will only bugger up the AFM if they are over oiled.

I have been using an Amsoil EaA filter (as per the G35 Infinity) for a few years now, no probs with it at all :D

Was quite a reasonable price (much cheaper than K&N etc) from these guys

Good flow, good filtration, good price :D

Edited by iamhe77
+1 on getting a dry filter although the oiled ones will only bugger up the AFM if they are over oiled.

I have been using an Amsoil EaA filter (as per the G35 Infinity) for a few years now, no probs with it at all :D

Was quite a reasonable price (much cheaper than K&N etc) from these guys

Good flow, good filtration, good price :D

Couldn't find air filters on their site?

found these: http://www.nengun.com/nismo/s-tune-sports-air-filter

Which is the correct part number? And How long do they last?

The K&N ones supposedly last 50k km???

That "rubbing" noise is the blow off valve.

It's almost like a brrrrruuuu as you slowly let your foot off the pedal during full boost, isn't it?

It's quite common.

You can fix this by blocking the blow off valve off or replacing it with a different one.

That "rubbing" noise is the blow off valve.

It's almost like a brrrrruuuu as you slowly let your foot off the pedal during full boost, isn't it?

It's quite common.

You can fix this by blocking the blow off valve off or replacing it with a different one.

I don't suggest it, mine holds 22 psi just fine. I drove Aarons with an aftermarket bov and wasn't impressed. Sorry Aaron. :)

That fart sound from the stock blow off valve is embarassing. Especially if you've got chicks in the car :)

From outside they look at the car and it looks like it's new but little do they know when you boost a bit, it poos in it's pants.

I don't suggest it, mine holds 22 psi just fine. I drove Aarons with an aftermarket bov and wasn't impressed. Sorry Aaron. :)

PSSHHHTTT...... Hektic!

Re fart noise- Sounds like +1 for having a NA car. Chicks don't think you had a bad Curry the night before ..... :)

That "rubbing" noise is the blow off valve.

It's almost like a brrrrruuuu as you slowly let your foot off the pedal during full boost, isn't it?

It's quite common.

You can fix this by blocking the blow off valve off or replacing it with a different one.

So will this issue damage the turbo/engine if I don't fix it soon?

I don't want to get any BOV which makes stupid "pffffffeeeeeeeeeeeew" noises.

Hunt around for a stock one I guess?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...