Jump to content
SAU Community

Recommended Posts

So I've had the car for a few days and everything's pretty good but I did notice a few things:

Suspension creaking noises - I was told by the seller (who was told by Andy I think) that due to the "alloy bushes"? used in the M35 the suspension will creak a little when 1st driven?

Turbo noise - didn't get any of this on my way back from Sydney, but now I notice SOMETIMES (maybe 50%) when I hit boost, I get a "rubbing" noise - imagine driving over the rumble strips on the Hume, now speed it up x2. Sounds just like that...

Is something about to die?

Link to comment
https://www.sau.com.au/forums/topic/344214-suspensionengine-noises/
Share on other sites

  • Replies 42
  • Created
  • Last Reply

Top Posters In This Topic

If the bearings are on the way out theres nothing you can do about it, highflow time. I would say most Japanese owners would be getting rid of these before the 100,000k turbo replacement or when noises start.

If the bearings are on the way out theres nothing you can do about it, highflow time. I would say most Japanese owners would be getting rid of these before the 100,000k turbo replacement or when noises start.

So the rubbing noise = bearing failing?

I would think it would sound more...metallic/high pitched?

So the rubbing noise = bearing failing?

I would think it would sound more...metallic/high pitched?

The bearings hold the wheels in place, when they wear, the compressor wheel sometimes starts to rub on the front housing causing damage. If the rear bearing wears, the ceramic turbine blades shatter.

What sort of rubbing noise are we talking about? Sounds like what Cams car used to do when the manifold was leaking too, farting... :rolleyes:

The bearings hold the wheels in place, when they wear, the compressor wheel sometimes starts to rub on the front housing causing damage. If the rear bearing wears, the ceramic turbine blades shatter.

What sort of rubbing noise are we talking about? Sounds like what Cams car used to do when the manifold was leaking too, farting... :blink:

Sounds like when you drive over the rumble strip on the left lane on a highway...speed it up x 2 and you have it.

Does remind me of a very low sounding fart...

I might just have to come around and show you :rolleyes:

Sounds like when you drive over the rumble strip on the left lane on a highway...speed it up x 2 and you have it.

Does remind me of a very low sounding fart...

I might just have to come around and show you :rolleyes:

Could just be the manifold to turbo bolts then, dump has to come off to get to them...

Sounds like when you drive over the rumble strip on the left lane on a highway...speed it up x 2 and you have it.

Does remind me of a very low sounding fart...

I might just have to come around and show you :rolleyes:

Sound is probably caused by the turbo not getting enough air.

I had that exact same sound prior to opening up the intake.

1. make sure you have a high flowing panel filter in your airbox

2. if it still makes the noise, get Scott to make you up a suction pipe LIKE MINE

Edited by iamhe77
get a dry one, i rekon the oiled ones are a bit iffy and MIGHT affect performance by leaving oil deposits on the AFM

+1 on getting a dry filter although the oiled ones will only bugger up the AFM if they are over oiled.

I have been using an Amsoil EaA filter (as per the G35 Infinity) for a few years now, no probs with it at all :D

Was quite a reasonable price (much cheaper than K&N etc) from these guys

Good flow, good filtration, good price :D

Edited by iamhe77
+1 on getting a dry filter although the oiled ones will only bugger up the AFM if they are over oiled.

I have been using an Amsoil EaA filter (as per the G35 Infinity) for a few years now, no probs with it at all :D

Was quite a reasonable price (much cheaper than K&N etc) from these guys

Good flow, good filtration, good price :D

Couldn't find air filters on their site?

found these: http://www.nengun.com/nismo/s-tune-sports-air-filter

Which is the correct part number? And How long do they last?

The K&N ones supposedly last 50k km???

That "rubbing" noise is the blow off valve.

It's almost like a brrrrruuuu as you slowly let your foot off the pedal during full boost, isn't it?

It's quite common.

You can fix this by blocking the blow off valve off or replacing it with a different one.

That "rubbing" noise is the blow off valve.

It's almost like a brrrrruuuu as you slowly let your foot off the pedal during full boost, isn't it?

It's quite common.

You can fix this by blocking the blow off valve off or replacing it with a different one.

I don't suggest it, mine holds 22 psi just fine. I drove Aarons with an aftermarket bov and wasn't impressed. Sorry Aaron. :)

That fart sound from the stock blow off valve is embarassing. Especially if you've got chicks in the car :)

From outside they look at the car and it looks like it's new but little do they know when you boost a bit, it poos in it's pants.

I don't suggest it, mine holds 22 psi just fine. I drove Aarons with an aftermarket bov and wasn't impressed. Sorry Aaron. :)

PSSHHHTTT...... Hektic!

Re fart noise- Sounds like +1 for having a NA car. Chicks don't think you had a bad Curry the night before ..... :)

That "rubbing" noise is the blow off valve.

It's almost like a brrrrruuuu as you slowly let your foot off the pedal during full boost, isn't it?

It's quite common.

You can fix this by blocking the blow off valve off or replacing it with a different one.

So will this issue damage the turbo/engine if I don't fix it soon?

I don't want to get any BOV which makes stupid "pffffffeeeeeeeeeeeew" noises.

Hunt around for a stock one I guess?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So, this shouldn't be such a mission, but there were a few tricks so I thought I'd post up a DIY for it. This was on a Q50 Red Sport but I doubt any other V37 model is very different (maybe just less steps for the intake heat exchanger hoses) I pulled the radiator out to flush it because the car was running hot at the track, but obviously the same steps apply for changing a radiator for any reason including an upgrade. If you are removing the radiator, you of course need to drain and refill, so have 5+ litres of blue coolant ready. You don't need to drain the intake heat exchanger to remove the radiator but depending on your plans you may need a couple of litres for that as well. You will also need something to deal with the auto transmission lines, I used 2x 8mm rubber caps on the radiator side, and a short length of 8mm pipe on the car side.....unless you can block these lines quickly you will loose AT fluid and it may be enough to hurt the transmission if you don't refill it. Other than that....lets go... "First, jack up your car". Yes really, and put it safely on stands. If you are not confident doing that you need to give this job to a mechanic
    • If the forester is anything like our old 2007 GTB Liberty, I could near on run ling Long's and "rate them", as no matter what, it just hung to the road, even when abusing it in a hard launch in the wet, or throwing it at corners.
    • LOL, all of the CAI like Craig I just need to put a hole saw through my bumper Done and dusted, the car runs, which is nice, I'll take it for a spin when the weather clears up Just need to put the bumper back on for good
    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
×
×
  • Create New...