Jump to content
SAU Community

Recommended Posts

Just throwing around ideas.....I think my mods are coming to a halt due to need for a 4wd dyno as well as other things.

So if anyone has a 32 GTR that they want to use as a trade to get a 33 GTR...I'll concider it as I want to be able to go rwd...

1995 vspec in purple

[email protected]

Just throwing around ideas.....I think my mods are coming to a halt due to need for a 4wd dyno as well as other things.

So if anyone has a 32 GTR that they want to use as a trade to get a 33 GTR...I'll concider it as I want to be able to go rwd...

1995 vspec in purple

[email protected]

You can dyno a R33 GTR on a 2 wd dyno....

Cheers

Ken

Wow , where does all this info come from.

Pull the fuse and bleed off the residual line pressure in the ATTESSA 4wd unit at the rear of the gearbox.

Get it wrong and stand back though....

Cheers

Ken

Heh, I take it you have been sprayed with fluid as well Ken. :rolleyes:

I need to take some pictures of how to do it and post it up, this question pops up so often.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Kittens in first to claim dominance of the residence, then puppies later From past experience, the other way around can be problematic to say the least  Those weird "Dobby looking"  little kittens are not cheap....LOL
    • At least yours have parkour down pat. One of mine will still trip over his own shadow and fall over... He's a special type of cat... Ha ha ha
    • The question then becomes - was there any fluid coming from that hole before you did the rebuild ?    You may not have noticed, of course.   Depending on how you did the rebuild, the possibility has to be considered that somehow (cleaning ?)  fluid entered that hole and is now being 'forced'  out by small movements of the proportioning valve.   From the factory, there's actually a small rubber plug in that hole but with age and under-bonnet heat it's quite common for it to 'go missing'.  That rubber plug is designed to allow the venting process but also to prevent 'stuff' getting to the area (prevent corrosion, etc).   The plug is also not available as a spare part AFAIA. Personally I wouldn't race and buy a new master just yet but keep an eye on the area to see if the 'leak' continues.   If you're concerned about brake fluid damaging nearby paintwork, cable tie a piece of suitable absorbant material over the hole and remove/monitor occasionally.    Operation of the proportioning valve and the brake master itself won't be affected, but also keep an eye on brake fluid level, of course. In terms of a new master, the genuine part is getting expensive, unfortunately.  Amayama is showing AUD900+.   I was searching recently and there's an aftermarket part available from Japan made by 'Parts Assist': https://zenmarket.jp/en/yahoo.aspx?q=BNR32%2bBM50&p=1 Whether it's any good I have no idea, although in my experience Japanese aftermarket stuff is pretty good quality-wise.   The above site allows overseas buyers to purchase stuff more easily from Japan but there are fees and shipping costs, of course.   The original Japanese seller page is here: https://auctions.yahoo.co.jp/jp/auction/p1197401228 Copper/Nickel is fine but I still prefer bundy tube and it's also cheaper.
    • Your chihuahuas look weird!
×
×
  • Create New...