Jump to content
SAU Community

Recommended Posts

Hi all,

Here's the issue:

- Car runs completely normal (boosts well, idles well, etc) for the first 15 minutes or so of driving.

- After about 15 minutes when the car becomes warm, idle becomes very rough, revs start bouncing from 100rpm to 1500 rpm.

- Continue driving under these conditions results in engine pulling back timing, nearly complete loss of power and almost undrivable (although turbo still spools per am boost gauge).

I've had this problem for weeks now and still unable to solve. I attempted the following to fix the issue: cleaned AFM, cleaned AAC valve, checked for vacuum leaks, but problem remains. I'm now thinking it could be a sensor issue as I've tried the above and failed to fix the problem. Since the car drives 100% when cold, and starts getting these symptoms when warm.. I was thinking a temp sensor playing up? But I don't have much knowledge in that department and need your help!

Has anyone also run into this problem before or to shed me some light? Also what other possible problems may occur under the conditions described above?

The only modifications done to the car are 3" cat back exhaust, pod filter, Platinum spark plugs, and spitfire coilpacks.

Thanks in Adv.

Forgot to add: Car in question is a 1997 r33 Gts-t, rb25det

Edited by nsdq

i had very similar issues, get a hold of a consult cable and see what the car is doing. check here for the thread i asked some questions on. hopefully it helps.

my car is now running perfect.

A shagged O2 sensor won't do that, just change your mix on cruising.

I can't really suggest anything else though, but I am curious to see how this goes.

Rene thanks for the link, I will have a read up on it.

I'm going to take it to a garage this weekend and run a diagnostic. Don't know when I'm going to get the consult cable if I order one.

Will post up what I find this wkend.

I taped up my splitfire coilpacks a few days ago (where the common hairline crack problems occur) and took the car out for a drive just then. Remained problem free for the longest time for weeks (About 30-40mins). After that however, right after I fanged it to 6500 a few times, idle started to bounce as initially described. I continued driving and car became very jerky, sudden power on, complete power off when my foot remains static on the gas.

This increasingly seems like a coilpack issue - what you guys reckon? Although from what I described, it doesn't make sense if it was just one knacked coilpack. Feels more like at least 3 - 4 stops working. If I take it to a garage (which I'm planning to this wkend) it's going to be difficult to fix as most times the car runs fine. Thoughts?

I would start with the smaller stuff first (if you havent already). coilpacks fixed my missfiring at high rpm, but didnt fix my idle problem. try things like fuel filter, bad earths, vacuum leak, clean the aac valve, then adjust the iac valve etc. with me (may not be the same for you) my tps was shy of the 0.4V. i adjusted that then my idle was racing, so then i adjusted the iac valve, which stopped the timing going nuts. it is just about perfect (will be making minor adjustments this weekend to get perfect). if all this fails i would then go the coil pack route, as they are not cheap. it might be worth borrowing some from someone in your area just to make sure its the coils though. if you dont want to spend an arm and a leg on splitfires, theres a supplier over here which sells good coils. with your guys dollar being so strong at the moment it may work out super cheap. let me know??

Hi all,

Here's the issue:

- Car runs completely normal (boosts well, idles well, etc) for the first 15 minutes or so of driving.

- After about 15 minutes when the car becomes warm, idle becomes very rough, revs start bouncing from 100rpm to 1500 rpm.

- Continue driving under these conditions results in engine pulling back timing, nearly complete loss of power and almost undrivable (although turbo still spools per am boost gauge).

I've had this problem for weeks now and still unable to solve. I attempted the following to fix the issue: cleaned AFM, cleaned AAC valve, checked for vacuum leaks, but problem remains. I'm now thinking it could be a sensor issue as I've tried the above and failed to fix the problem. Since the car drives 100% when cold, and starts getting these symptoms when warm.. I was thinking a temp sensor playing up? But I don't have much knowledge in that department and need your help!

Has anyone also run into this problem before or to shed me some light? Also what other possible problems may occur under the conditions described above?

The only modifications done to the car are 3" cat back exhaust, pod filter, Platinum spark plugs, and spitfire coilpacks.

Thanks in Adv.

Forgot to add: Car in question is a 1997 r33 Gts-t, rb25det

looking at your symptoms it could be any thing related to below.

Idel controler system

Air Fuel Ratio

Ignition system or engine compression

i was fix same thing b4. i was ACC valve. it was falty. [solonoid it self]

just symply disconect the aac valve and see any different

disconect the pressure regulater vacume and see any different

check your ign timing.

if you are in sydney near parramatta i can help you to sort this thing. if you like PM me.

i won't charge you

yeah check the things with consult mentioned in other thread, e.g. with it cold idle (good) and then warm idle (when bad): AAC, TPS, Closed Throttle Switch, Coolant Temp, Ignition Timing, RPM.

  • 2 months later...

Sorry to dig up an old thread, but did you ever discover what was causing the problem?

I had similar problems to you and it turned out to be the Cam Angle Sensor (CAS). Picked up a 2nd hand one off ebay for $150, brand new they're more like $650. It can be a bit of a risk getting a 2nd hand one, but I bought mine off a parts place who said I had a 7-day DOA warranty.

It's pretty easy to fit, just make sure you line up the markings with the old one so you don't stuff up your timing. I did it myself and managed to get the timing spot on, made a HUGE difference to how the car drives.

Unfortunately mine is still pulling some timing when the water temp reaches 75C but I believe it is unrelated, probably the knock sensors or something. Just about to clean the AAC valve - will let you know if that makes any diff!

Edited by benro2

I don't see how the car could be tuned with a dodgy CAS. It's too random to be able to tune "around" it. It's not like it just pulls out a set amount of timing, it's all over the place.

I also cleaned my AAC valve on the weekend and it didn't fix my timing issue (which I was 99% sure about) but it has improved the idle somewhat. Didn't work miracles like some people have said, but maybe mine wasn't that dirty to begin with. I also may not have cleaned it as well as I could, but I did give it a damn good clean with carby cleaner and a LOT of carbon came out! I did notice that the car starts a lot easier now too!

Worth giving it a go if you haven't already. From what you've said it's almost definitely the CAS but can't hurt to eliminate all possibilities.

Sounds like AFM..pull off the afm, unscrew the 4 screws around the plug fitting. Once open, spray contact cleaner or tb/c cleaner in it..

Almost sounds like what my car was doing. I went through everything until I got my cable from ecutalk...turned out it was the maf sensor (afm) up to shiz..cleaned out all the gunk and so far my cars runnin sweet..

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The alloy coolant reservoir has a sight glass, so as long as I can see coolant in the sight glass it's GTG, as for PS, it isn't anything catastrophic if it gets low, and as it hasn't lost a drop since I have owned the car I cannot see it being an issue, even after putting the "big block" 2.5 in....LOL The only time it gets slightly messy is at oil changes, as the oil filter sits above the frame, and I need to use a plastic bottle with its bottom cut off to catch the flow when loosening the filter
    • Good on you for taking on the job, but it is a big one. Even if you have bolt on manifold and turbo, you will need: Post throttle pressure source to boost controller to wastegate (and FPR, and ECU/MAP sensor) Pre throttle pressure source to top of BOV(s) Oil feed - you can take that from the standard port in the middle of the block Oil return to block under the turbo - this is much trickier than it seems to route a decent/wide pipe past the manifold. You really can't use rubber hose because it is way too hot there, and also the oil out of the turbo core is a bit frothy so it needs to have a decent diameter Water feed - you can take that from the standard port in the rear of the block. Water return - mine runs to a T into the heater box return, just make sure you don't create a high point making bleeding hard. All of those lines should use 200 series style teflon braided hose with heat shielding because everything needs to be routed past the manifold. Also a turbo beanie is a really good idea to minimise the chance of the car catching fire (under bonnet lining in particular) You also need to decide a cam cover breathing solution as well, will you vent externally via a catch can (probably illegal) or return to the intake (plumbing required and can oil up everything over time) Keep in mind the intake and exhaust piping in the engine bay will be custom so you either need to be able to fab ally and steel or have someone you can get a car that isn't running to. Get the wideband fitting welded into the dump pipe at the same time. Also, just my opinion, a screamer pipe attracts attention and doesn't add power, I'd plumb it back if you want to be allowed to keep the car on the road. BTW do you know anything about how healthy the motor is, and what power you are targeting? Doubling or tripling the factory power on an unknown motor is a little risky. Also fuel system will need some attention (pumps, high current hanger, direct power and earth feed, injectors etc)
    • Wrinkle black will be a thing for both
    • As I wait for parts to be delivered, I have managed to procure via a contact a R32 Nistune ECU......for now I just want to monitor what the car is doing but eventually.......who knows where we go 😂
    • To back this up, I'm always looking on the outside, seeing the level, and then opening it up anyway, as I'm worried the level I've looked at, is more so a scunge line. Then you end up dipping your damn finger in it too depending on the type of tank you're looking at just to make sure I'm not going insane.   PS, Mark, polish up the none moroso one a bit and then give it a clear coat. The Moroso one looks to be way shiner (not mirror polished, just shinier) and it'll still look weird with the two different alloys beside each other. Either that, or Id probably paint them a flat black...
×
×
  • Create New...