Jump to content
SAU Community

Recommended Posts

Hey James,

better get used to it :wave:. I had mine dynoed 3 weeks ago and got 105kws as well. I have got the same engine as yourself in a R32 and its factory fitted.

however, the mods i had are:

pod filter modified to front bar

cat back 2 1/4 inch exhaust.

engine oil: Mobil 1

gearbox + diff oil: redline

it was a 36 degrees hot morning when i had the 3 runs and the consolation i had was that all 3 runs show consistent results at 105kws and at least i know that the car is running well and not clutch slipping or anything. btw, my dyno was done at 3rd gear and was pushed to 120km/h.

i also read somewhere that the results varies on different dyno, usually in the plus & minus of 5 kws region.

glenn

when my car was n/a i got 96rwkw with 2.5" exhaust thats it, so i think yours is realistic enough

hey doxximus,

do you miss the N/A burble or are you more than compensated by the extra power.

i want the power but i seriously love the sound of my car under full noise(despite the neighbours)

rod

Last time I had mine on the dyno I got 112kw, that was a 4th gear dyno.

Mods to my car K&N panel filter, 2 1/2" exhaust, extractors.

When it was auto it got 100kw.

Other NA's on the same dyno run between 94 to 105kw, with similar mods.

James i wouldn't be too disappointed with your result! :D What exactly does the unichip do (ie what does it adjust/change)?

With extractors, 2.5" cat back exhaust system and pod i only got 81rwkw (graph attached), that was at the dyno day _turtle_ mentioned. I think the reason all of our results from that day were so low is because we dynoed in 4th gear (top speed 180).

Have u looked at fitting a s-afc, or does the unichip adjust the air fuel ratios to an optimal level??

Cheers,

Greg

The uni-chip offers the same ranges of adjustment as many aftermarket computers, and Dynomotive are the best at tuning uni-chip systems in my opinion. Experiance counts foe everything in the tuning game.

Mine got 94 rwkw, in forth gear

Mods: Kobe extractors, and 2 1/2 inch exhaust

That was with a stock air filter, so it might have been stuggling to get enough air.

The new engine is in the car and should be run on the dyno this friday, I'll let you guys know the improvement.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...