Jump to content
SAU Community

Recommended Posts

we have a stock rb25 with a holset hc1 at 18 psi makeing 402whp on a dynojet

we re looking for anyone that has 400+ hp to share info with us

-hopefully we can find alot

we re planing to push ours harder but slowly -each time we up the boost i ll post the video

here s videos of ours

this is on e85 and methanol injection

1000cc and walbro 255lph hp

  • Replies 121
  • Created
  • Last Reply

Top Posters In This Topic

find info out about what exactly?

plenty of people have made near on 400rwhp on stock motors. and that's without E85 & meth.

all that info is easily accessible with the search or reading the dyno thread.

honestly taking into account E85 AND meth, your result is poor.

18psi at 5200, thats one laggy turbo...400rwhp although its good it aint huge hp. I know of cars making high 400's on E85 with full boost at 3800rpm (running low 20's psi). Either way keep us all informed it will be interesting to see it at mid to high 20 psi what power it produces.

Yeah, 5200 is no surprise.

The HC1 is an old horse Cummins truck turbo. There were two sizes... I'm assuming its the larger given how bad the response is on E85, which means its capable of around 450-500rwhp going off some US results...

it doesn't appear they were using any special fuels either (85 or meth)

find info out about what exactly?

plenty of people have made near on 400rwhp on stock motors. and that's without E85 & meth.

all that info is easily accessible with the search or reading the dyno thread.

honestly taking into account E85 AND meth, your result is poor.

i did some research but found it on dynopacks and dynodynamics

we live in fresno ca which is central california(usa)

there s no one withthin 200 miles from here with a high hp rb motor

most r all heresay

-and a dynopack reads 22+% higher than our dynojet

find info out about what exactly?

plenty of people have made near on 400rwhp on stock motors. and that's without E85 & meth.

all that info is easily accessible with the search or reading the dyno thread.

honestly taking into account E85 AND meth, your result is poor.

that s what i said

compare this power to our hondas it s a over price pig...

we have test motors with honda making 100whp per cylinder

-i think it should at least handle 550whp...

400rwHP.... That is roughly every second skyline on this forum. It seems that your turbo leaves you sinking in no mans land.

Two threads for you to read:

http://www.skylinesaustralia.com/forums/Pr...html&st=100

http://www.skylinesaustralia.com/forums/40...html&st=360

Those threads are about cars making 500+WHP on E85. Specifically look at the PT5557 results on E85 on a stock SR20, 500+WHP.

The PT thread has all the proof you will need. End.

that s what i said

compare this power to our hondas it s a over price pig...

we have test motors with honda making 100whp per cylinder

-i think it should at least handle 550whp...

Theres a guy on here username 180or200 thats making 580rwhp on an unopened RB25 on E85. He has been making that for a couple of years so 550rwhp is definately achieveable with the right tune and mods. He's using a Garret 3582 .8 rear with high 20psi boost.

Good luck with it all and keep us informed.

400rwHP.... That is roughly every second skyline on this forum. It seems that your turbo leaves you sinking in no mans land.

Two threads for you to read:

http://www.skylinesaustralia.com/forums/Pr...html&st=100

http://www.skylinesaustralia.com/forums/40...html&st=360

Those threads are about cars making 500+WHP on E85. Specifically look at the PT5557 results on E85 on a stock SR20, 500+WHP.

The PT thread has all the proof you will need. End.

The link to the 400rwkw thread is not really applicable, they are all built motors.

Just Nistune ECU with 800cc injectors. It was noisy and rough, had broken ring lands on 3 pistons and chewed out valves due to float. Should really run forgied pistions and stronger valve springs to do any thing like that. and its 431rwHP instead of 428 lol.

Just Nistune ECU with 800cc injectors. It was noisy and rough, had broken ring lands on 3 pistons and chewed out valves due to float. Should really run forgied pistions and stronger valve springs to do any thing like that. and its 431rwHP instead of 428 lol.

how high did u rev to float the valve springs?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...