Jump to content
SAU Community

Recommended Posts

Hi!!

I've heard of others having the same situation like mine.

My GT-R32 has been having this flickering Hicas light for quite sometime already. What happens is that it will light up (sometimes w/ matching knocking sound at the Hicas pump area) at high revs and during high electrical load. Checked all the connections, alternator, battery, you name it... all are A ok. Still can't locate the culprit. But I sort of suspect my HKS T.Timer has to do something about it. So last night I disconnect my HKS T.T, and test drive it today and... voila! No more Hicas flickering!

Now for you guys who has this similar problem, how do you deal w/ it? Is it the e-brake or earth connection? I know the BNR32's Hicas system is super sensitive on voltage... What could it be. frown.gif Hope you can help me guys. Thanks in advance!

Link to comment
https://www.sau.com.au/forums/topic/346105-hks-turbo-timer-hicas-problem/
Share on other sites

Wow, I have the exact same problem, and a HKS turbo timer! But my HICAS light flicker/pump noise/solenoid noise occurs randomly during idle/driving as well. It's annoying when you turn, the steering wheel "kicks" when this happens.

I'll disconnect the bastard tonight.

Wow, I have the exact same problem, and a HKS turbo timer! But my HICAS light flicker/pump noise/solenoid noise occurs randomly during idle/driving as well. It's annoying when you turn, the steering wheel "kicks" when this happens.

I'll disconnect the bastard tonight.

Just as I thought... another one. :thumbsup: Tell me if it solves the problem. My HKS t.t has a harness by the way, that is what I unplugged. I just wish someone can tell us a solution on this besides having to drop the whole Hicas off. I also noticed that this situation happens a lot on GT-R32s and not on any other Nissan that also has Hicas during it's time.

  • 6 months later...

Apologies for the huge delay, I wasn't in the country after my previous post.

I disconnected the HKS turbo time on Sunday(has the wiring harness so just unplugged that), went for a quick drive and the issue didn't appear. Was heaps happy until the next day when I was driving back from work the HICAS "kick" showed it's ugly head again.

Now it doesn't matter whether I connect or disconnect the turbo timer, the HICAS light/kick in steering/noise from boot occurs randomly. I'm thinking perhaps it's the HICAS computer or some sort of electrical problem :( (I haven't done the HICAS diagnosis yet, will do on the weekend).

Also when I start the car I can hear about 4-5 clicks coming from the boot (HICAS pump?).

  • 3 months later...

Got an update on this issue, which popped up yesterday.

Volts got real low (dipped below 12 while engine was running), HICAS system goes spastic (flashing light, can very clearly hear the pump going off every second, steering obviously kicking in sync with the pump). The voltage would go as low as 6.5V while driving (lost radio, and eventually HICAS).

Went and bought a new battery, all sweet for a few minutes until the volts dropped below 12.5V.

Strange thing is, sometimes the volts would go up to the usual 13.5V mark and everything will run sweet.

So, the HICAS system is very sensitive to the voltage (as documented here on SAU), the strange thing is trying to locate source of the voltage drop.

I hope the alternator isn't dying. I've cleaned the plugs at the terminal with contact cleaner it fixed the issue for about a minute. One of the fusible links is a little dodgy, I might try to replace the terminal.

I'll also have a look at the alternator tomorrow and hopefully find some sort of resolution.

*edit*

Unplugging the HKS turbo timer doesn't make a difference. I'll suss out the wiring anyway in case it's not grounded properly.

Check if the alternator belt is slipping, with that voltage drop I'd be looking at the chassis ground and cleaning them up by sanding the paint/rust back, and even go as far as making a seperate (clean) ground for the alternator.

If all that doesn't solve it, new alternator

Well on the way back from work yesterday, alternator stopped charging completely. Managed to get the car off a busy road, and parked it in a side street (flat battery). Today, grabbed a second hand alternator, threw it in the car and away I went.

So far so good, no more flashing HICAS light as of yet. I still hear a solenoid clicking away in the passenger side of the boot. I'll suss it out tomorrow. I'll clean the grounds as well.

  • 2 weeks later...

Sorry for not updating earlier.

In relation to this topic, replacement alternator fixed the HICAS issue (haven't had any steering kicks or the pump going spastic as of yet after a couple of weeks of driving).

As for the rear end issue, it looks like it's related to wheel alignment (toe out I'm guessing, I dropped backe the rear camber arms a bit and it has settled the rear end a bit).

tl;dr - HICAS is voltage sensitive.

  • 7 months later...

I'm bumping this thread because it's relevant.

Since my last post, the 'HICAS' problem came back and I pretty much learned to live with it for almost a year. Yesterday I bought a fat earth cable and replaced the negative terminal. The HICAS problem hasn't occurred since I did the replacement. The radio antenna works now as well (I used to get terrible reception). The clock even works now! :D

If you own an R32, get at least a fat cable going from negative terminal to body. I bought one for $20 from Pep's store with a terminal attached to it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
    • My return flow is custom and puts the return behind the reo, instead of at the bottom. All my core is in the air flow, rather than losing some of it up behind the reo. I realise that the core really acts more as a spiky heatsink than as a constant rate heat exchanger, and that therefore size is important.... but mine fits everything I needed and wanted without having to cut anything, and that's worth something too. And there won't be a hot patch of core up behind the reo after every hit, releasing heat back into the intake air.
    • There is a really fun solution to this problem, buy a Haltech (or ECU of your choice) and put the MAF in the bin.  I'm assuming your going to want more power in future, so you'll need to get the ECU at some stage. I'd put the new MAF money towards the new ECU. 
×
×
  • Create New...