Jump to content
SAU Community

Its Time To Say Good Bye To My M35 Stagea

danwatt

By danwatt,
in Four Door Family & Wagoneers

 Share

Recommended Posts

danwatt Collaborator

danwatt

Posted
  • Author
Posted

Thanks mate, Craig posted mine up too. :)

I have the wiring diag coming soon too hopefully, not that you will need it anymore... What are you upgrading to mate?

Since the Stag has been used by wife and kids for the past year I bought them a Nissan Murano, a little younger and less km and a more practical family car.

Sunkist Grand Master

Sunkist

Posted
Posted

Since the Stag has been used by wife and kids for the past year I bought them a Nissan Murano, a little younger and less km and a more practical family car.

the muranos shape up pretty nice as well

nickcorr Proficient

nickcorr

Posted
Posted

the muranos shape up pretty nice as well

Great cars the Murano, but less good if you have small kids. The car seat tethers are mounted on the rear edge of the boot, so if you have child seats fitted the straps run across your entire boot... Nissan knew about this being an issue on the old Micra's, so made sure it was fixed on the new ones. Unfortunately Holden did not do the same research, so the Barina Spark joke boot, becomes unusable if you have little kids..

These Aussie only regs sometimes trip people up come compliance time...

prince_skyline Community Regular

prince_skyline

Posted
Posted

thanks for the PDF!

scott i have the massive fold out wiring diagram for the entire car. if you need to borrow it, i can take photos and stitch them together

Iain, I presume you are talking about the large 300 x 420mm foldout Wiring Service Book? I have it also, as well as the late PN Series one.

If anyone in Vic wants to borrow them? Scott, I can bring it with me when i come and have a chat :thumbsup: along with other books/brochures if interested.....

post-12229-0-80328000-1292406903_thumb.jpg

scotty nm35 Grand Master

scotty nm35

Posted
Posted

Iain, I presume you are talking about the large 300 x 420mm foldout Wiring Service Book? I have it also, as well as the late PN Series one.

If anyone in Vic wants to borrow them? Scott, I can bring it with me when i come and have a chat :thumbsup: along with other books/brochures if interested.....

post-12229-0-80328000-1292406903_thumb.jpg

Yes please. :)

danwatt Collaborator

danwatt

Posted
  • Author
Posted

Got the beast fully detailed today, Probably the cleanest it has looked ever (except for the day the body kit was painted-pitty the front bar is split and I had to put on the stock one).

Haven't had many interested parties yet, must be the wrong time of the year to be selling a car.

Maybe I should sell my focus instead. :)

post-40391-0-89345700-1292572724_thumb.jpg

  • 3 weeks later...
danwatt Collaborator

danwatt

Posted
  • Author
Posted (edited)

PRICE Drop $16500 it needs to go, If anyone is in the market for a M35 STAGEA here is a great car (Make me an offer)

My link

Edited by danwatt
danwatt Collaborator

danwatt

Posted
  • Author
Posted

Lousy time of year to sell anything, but best of luck its a nice looking ride.

Is the other front bar completely shot?

The the front bar had a 4 inch crack in it that has been repaired now, It needs a respray, was thinking of selling it

  • 4 years later...
BoostdR Mentor

BoostdR

Posted
Posted (edited)

here is the latest ECU pin outs I have collected so far.

Could someone confirm the crank POS And cam position sensor 1 are arse about in this diagram? I've belled out the crank sensor which goes to pin 65 not pin 95

RE greddy ultimate wiring

Mattpost-49288-0-24904600-1441866505_thumb.jpg

Edited by BoostdR
scotty nm35 Grand Master

scotty nm35

Posted
Posted

You are looking at the wrong pinout diagram, I had one translated in Japan which is more accurate than Danwatt's

http://www.sau.com.au/forums/topic/323254-m35-ecu-pinout/page-3

ECU_PINOUTS 13_12_10 (2).PDF

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      New kid on the block

      By GTSBoy · Posted

      The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Duncan
      New kid on the block

      By Duncan · Posted

      Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Songo
      New kid on the block

      By Songo · Posted

      Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • iain_ST44GA
      M35 VQ25DET starter motor

      By iain_ST44GA · Posted

      Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • Murray_Calavera
      R33 GTR running -9 with no tune

      By Murray_Calavera · Posted

      I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
×
×
  • Create New...