Jump to content
SAU Community

Recommended Posts

Hey guys been looking at importing a clean R32 GTR for quite some time now..

Rust, Bent rails, "minor accident repairs", ridiculous prices for not so clean models... Story of my life. Is it just me or are these cars getting harder to source?

I am willing to pay good money for one but I mean some prices are just ridiculous..

I have imported in the past (few years ago) but it seams to me they are getting harder and harder to come across and if you want a good one be prepaired to pay an unrealistic amount.

Let me know what you all think..

Ideally I am after a clean VSPEC/VSPEC II model but will settle for clean standard example.

Any help or reccomended places would be appreciated.

Not looking for rocket ships, just want a clean stocker.

Link to comment
https://www.sau.com.au/forums/topic/346810-importing-a-clean-gtr/
Share on other sites

Definitely.

Perfect condition R32s are now becoming more sort after by the locals and collectors and the ones that aren't picked up by them are put through the auctions and because they haven't been picked up earlier, there is good reason, they aren't in very good shape, due to age of course.

Good luck :)

Hey guys been looking at importing a clean R32 GTR for quite some time now..

Rust, Bent rails, "minor accident repairs", ridiculous prices for not so clean models... Story of my life. Is it just me or are these cars getting harder to source?

I am willing to pay good money for one but I mean some prices are just ridiculous..

I have imported in the past (few years ago) but it seams to me they are getting harder and harder to come across and if you want a good one be prepaired to pay an unrealistic amount.

Let me know what you all think..

Ideally I am after a clean VSPEC/VSPEC II model but will settle for clean standard example.

Any help or reccomended places would be appreciated.

Not looking for rocket ships, just want a clean stocker.

To start what to do call good money and what is a ridiculous or unrealistic price (examples appreciated) for a car that is at least 16 years old.

Definitely.

Perfect condition R32s are now becoming more sort after by the locals and collectors and the ones that aren't picked up by them are put through the auctions and because they haven't been picked up earlier, there is good reason, they aren't in very good shape, due to age of course.

Good luck :)

Yer there is definitely no doubt about them becoming quite rare. I have a broker that I am using (Iron Chef imports) they send me cars regularly but all from auction and around 9/10 the cars that go through auction are either grade 3 or R. I guess your right about the good ones being picked up and the left overs going to auction in that case then.

Reason for the thread is that I have located a local car which is fairly clean and am thinking about purchasing it or just continuing to look.

In reply to the other post looking at the auctions it seams that above average non rusty GTR's are going for around 600,000JPY-700,000JPY. I am willing to pay around 1,200,000-1,300,000 Maximum which I think is very reasonable.

I have started to consider the R33 models also, being alot less faults and being around a similar price although I have similar troubles to the R32 in locating a clean one.

Any help or advice would be appreciated.

^^^ now considering an R33 GT-R?

Hard to go past this... http://www.skylinesaustralia.com/forums/topic/345997-fs-1996-nissan-bcnr33-gtr/

Otherwise an lovely clean R32 GT-R will pop up here on SAU out of the blue. I'm sure someone looking at this thread will be tempted to PM you :whistling:

Yer there is definitely no doubt about them becoming quite rare. I have a broker that I am using (Iron Chef imports) they send me cars regularly but all from auction and around 9/10 the cars that go through auction are either grade 3 or R. I guess your right about the good ones being picked up and the left overs going to auction in that case then.

Reason for the thread is that I have located a local car which is fairly clean and am thinking about purchasing it or just continuing to look.

In reply to the other post looking at the auctions it seams that above average non rusty GTR's are going for around 600,000JPY-700,000JPY. I am willing to pay around 1,200,000-1,300,000 Maximum which I think is very reasonable.

I have started to consider the R33 models also, being alot less faults and being around a similar price although I have similar troubles to the R32 in locating a clean one.

Any help or advice would be appreciated.

nice gtr's are still going for this kind of money here. even a bit more from some car shops

a friends shop has got these two currently.

http://www.goo-net.com/usedcar/spread/goo/16/700070261320100602002.html

http://www.goo-net.com/usedcar/spread/goo/16/700070261320101013001.html

these would probably be some of the cleanest gtr's left

Very very hard to find in clean non accident condition.

Remember a car is only original once, it would be too easy to just buy one to restore. I have a very good V spec for sale that I know I cant replace for the money Im asking. Ive been looking in Japan at all the accident car/ corrosion 2 and 3 shitters going for cheap and then a good car going for more than double. Common sense say I should keep it, and I may just do that!

Good luck in your search.

Why not restore one?

Even if they are clean they are still nearly 20 years old.

or in my case 21 ys. (see sig - GTS4.)

find a cheap one and spend $ fixing every aspect of it. in the end you will have spent $25k or so but 90% of it will be new.

I know of a red one that went through a RAW here in brissy that was for sale. I could probably find out who owns it if need be.

I know what you mean, i was in your extact position about 2 years ago when i was importing my 32gtr.

Its true that even the 1994 ones are 16 years old, but in my opinion a well looked after 16yr old car is better then a thrashed out 10 year old car.

personally i would pay a little bit more and buy a nice clean stock one. They are more expensive for a reason.

I don't see the big deal.

I know of some of good, real immaculate R32 GTRs. (2 Local to Perth, my old one in NSW)

Importing doesn't mean better condition. Look around locally, interstate etc.

5min search.

VSpecII - Original condition, no dash bubble, unworn steering wheel, no tear on drivers bolster + log books.

Carsales link

Stock - original exhaust, no wear on wheel/knob, tiny dash bubble. Stock standard bar wheels?

Carsales link

Stock - Wheels/exhaust all stock, no wear on wheel etc

Carsales link

Stock V-Spec - stock standard, straight etc

Carsales link

Another stocky, stock down to wheels/exhaust, mint looking.

Carsales link

You get my point, yes? There are plenty..

Edited by Ten Four

I know what you mean i have been looking for the past year for a nice r32 GTR. I found one through a brisbane importer. They found me a 1994 GTR v-spec with an auction grade of 4 and interior was a B grade. Only problem with the right hand wheel arch where the owner in japan put too wide of a tyre on it and it grabbed the inner wheel arch and damaged it a bit ( no real biggie i am a panel beater so i'll fix it myself) also got a repair history on the left hand front guard. Its got a head unit in and a nismo exhaust otherwise completely standard. Get to look at it next weekend. Here are a few pictures.

post-46746-0-05081800-1291970835_thumb.jpg

post-46746-0-70023000-1291970843_thumb.jpg

post-46746-0-18717000-1291970867_thumb.jpg

post-46746-0-33360200-1291970874_thumb.jpg

post-46746-0-03504100-1291970881_thumb.jpg

1st of all the topic is importing a clean GTR, If i wanted a local one the topic would have been finding a local GTR

I don't see the big deal.

I know of some of good, real immaculate R32 GTRs. (2 Local to Perth, my old one in NSW)

Importing doesn't mean better condition. Look around locally, interstate etc. But it does usually mean cheaper..

5min search. Have seen all these cars.. Might be clean but are the prices realistic?

VSpecII - Original condition, no dash bubble, unworn steering wheel, no tear on drivers bolster + log books.

Carsales link

Realistic Price - No!

Stock - original exhaust, no wear on wheel/knob, tiny dash bubble. Stock standard bar wheels?engine?

Carsales link

Early model.. New motor or at some stage taken out.. High KMs.. Not clean just because seat isnt worn and there is no bubbles in the dash mate...

There is much more to the eye than pictures can tell.

Rust

Chassis damage

Paint

Condition of motor.

I would make sure I was aware of as many of these by the current owner before I wasted my time travelling interstate.

I have looked at many local cars and have obviously done more research than your "5 min search".

Stock V-Spec - stock standard, straight etc

Carsales link

Realistic Price - No its a VSPEC if I wanted to spend 25k I would obviously buy a VSPEC II.

You get my point, yes? No not really just wasted 5 minutes of my life typing a reply but I hope you have learnt something.

I know what you mean i have been looking for the past year for a nice r32 GTR. I found one through a brisbane importer. They found me a 1994 GTR v-spec with an auction grade of 4 and interior was a B grade. Only problem with the right hand wheel arch where the owner in japan put too wide of a tyre on it and it grabbed the inner wheel arch and damaged it a bit ( no real biggie i am a panel beater so i'll fix it myself) also got a repair history on the left hand front guard. Its got a head unit in and a nismo exhaust otherwise completely standard. Get to look at it next weekend. Here are a few pictures.

Looks clean how much did it set you back if you dont mind my asking, Feel free to PM me.

or in my case 21 ys. (see sig - GTS4.)

find a cheap one and spend $ fixing every aspect of it. in the end you will have spent $25k or so but 90% of it will be new.

I know of a red one that went through a RAW here in brissy that was for sale. I could probably find out who owns it if need be.

I would rather just buy a clean one for that little bit extra. Knowing it has been treated well over its life time.

true,

most that I have seen or worked on over the years are beaten to hell. the last red one I say had the original paint underneath it. this is the one I think is worth buying.

nice gtr's are still going for this kind of money here. even a bit more from some car shops

a friends shop has got these two currently.

http://www.goo-net.com/usedcar/spread/goo/16/700070261320100602002.html

http://www.goo-net.com/usedcar/spread/goo/16/700070261320101013001.html

these would probably be some of the cleanest gtr's left

how would one go about getting in touch with your mate to grab one then?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • GCG is a good company, they're a major distributor for Garrett in Japan as well.
    • Nah, OEM washer bottle and brake fluid reservoirs are fine I don't know what it is with the plastic that Mazda used, some plastics, like the washer bottle and brake fluid res are fine, and still look new after 20 years use, where as the coolant expansion tank, and PS reservoir, that I replaced with new OEM items when I first got the car, turned yellow and started getting brittle a few years later If the dirty yellow stained plastics didn't trigger me there wouldn't be an issue, but they did, much like the battery bracket....... Meh As for going back to work full time to support car stuff, nope, why, because I own a Mazda NC MX5, not a Nissan R series Skyline 🤣
    • I've never heard of CJ-motor, so can't advise you on them. I'd just go straight to GCG for a GCG highflow though. Seems no point to use a middleman. I'm somewhat surprised that the price on the CJ site is lower than the GCG retail price. Even though CJ would get a discount of some sort, you would hardly expect them to give up so much margin. Maybe the price is out of date? Having said that "I'd go to GCG"...when I did my highflow, I went to Hypergear. I did this https://hypergearturbos.com/product/rb25dethighflow/#tab-dyno-results with the R34 OP6 450HP profile. With the BB centre (extra $400) and intially with the standard boost actuator, but I eventually got him to send me the high pressure one when I got to the point of being able to actually use it. Ends up costing the same sort of money as the GCG highflow, but this is, of course, the turbo that I KNOW has a shorter length core and so moves the comp cover rearwards. The GCG apparently doesn't do that. My mechanic also swears by the GCG highflow, given that we have another turbo rebuilder who does something essentialy the same as theirs, using Garrett wheels. He says it stands up at really low revs and makes good power. I haven't pushed my HG highflow past ~240-250rwkW yet (should have a little more in it, but unclear how much) and it does have a fairly gentle boost ramp. OK, it's much better now that I have gotten my boost controller tuned up on it.  A lot of my earlier unhappiness was because I couldn't keep the wastegate flap as closed as it needed to be (including some mechanical issues). I'd still prefer it to boost up nearly as quickly as the stocker, and it certainly a bit slower than that. So maybe the GCG one is worth the first look (for you).
    • Ok thanks 🙂 I will higly consider this. Any "known" company for a good reviews and experience to send that off? Is that CJ-motor good one? Or go straight to GCG site? I need to use VPN to even find some of those "shops" let alone access them 🙂 
    • You can literally put in as much WMI as it takes to quench the combustion totally (and then back it off a little, obviously), and it will keep making more and more power. The power comes from the cooling effect of the water (and the meth) and the extra fuel (the meth, which also has massive octane). It is effectively exactly like running E85. One might be slightly better than the other, but they are damn close. But with either you can lean on the boost or the timing (or both) waaaay more than with just petrol and the results are similar. Here's the first thing I googled for an anecdotal bit of evidence. Can't access the attachment without being a gold member, but it is there for the getting if able to, or searched up elsewise perhaps. https://www.hpacademy.com/forum/general-tuning-discussion/show/wmi-vs-e85/
×
×
  • Create New...