Jump to content
SAU Community

Recommended Posts

Any one played with one of these? what kind of money am I looking at, for a system to suit R33 gtst?  

Cheers.

Plug and play with very minor mods ( running map sensor line etc ) is $1395 excluding hand controller but with laptop software.

Cheers

Ken

Wolf 3d plug and play is indeed plug and play

i know its about 1800 for install and tune

the ecu retails for 1395 with a couple hundred more a hand controller

I would normally say ask for SST Steve as SST is worlds best wolf dealer but since your in qld id say you want someone more local - you obviously know where to go in you area.

they are a great ecu for the price.

Wolf 3d plug and play is indeed plug and play  

i know its about 1800 for install and tune  

the ecu retails for 1395 with a couple hundred more a hand controller  

I would normally say ask for SST Steve as SST is worlds best wolf dealer but since your in qld id say you want someone more local - you obviously know where to go in you area.

they are a great ecu for the price.

Interesting Tom ;)

We were told the price we had to quote was $2200 installed and tuned and $2K for SAU/Sil members....

Ken

Guest darrinspencer
Any one played with one of these? what kind of money am I looking at, for a system to suit R33 gtst?  

Cheers.

I have one

I am installing it in a couple of weeks time

It will be tuned at Bob Romano Performance in conjuction with KP performance (the Brisbane Dist.)

Will let you know the results

Interesting Tom :D  

We were told the price we had to quote was $2200 installed and tuned and $2K for SAU/Sil members....

Ken

Hehe its why i said about - by the time you add the controller it is past 2k easily :)

Im sure you know alot better then me seeing as how you do sell it down at hyperdrive :) perhaps i should have added the disclaimer that i know nothing hehe

Still awesome value at 2200 im sure you will agree Ken :headspin:

be very careful with the wolf 3D their product isn't what its all cracked up to be !

Had many problems for a plug and play!

You would probably be in the minority as a lot of them are in Sils and Lines here in WA with some of the 500+ hp GTR's running them with no real issues.

Maybe you got a dud one or the shop doing the work may not be familiar with them.

Tomj , they are good value for the price but $2200 doesn't normally include the controller.... :D

Cheers

Ken

If the unit costs $1400 (rounded up), hand controller $200, installation $0 (so easy to install i can't believe any workshop would charge to do this, provided you get it tunned through them) and tunning $300 max. How the hell do you get $2200+.

I've had the unit installed and running for the past 18 months with no real issues, just a light retune of ideal mixtures. Do a search and chech the previous threads :D.

The unit works and works well :).

You would probably be in the minority as a lot of them are in Sils and Lines here in WA with some of the 500+ hp GTR's running them with no real issues.

Maybe you got a dud one or the shop doing the work may not be familiar with them.

Tomj , they are good value for the price but $2200 doesn't normally include the controller.... :)  

Cheers

Ken

I dont think they do them for the GTR....

I dont think they do them for the GTR....

Sorry man but they do and they are a pandp ( if you don't count the MAP/boost line )

Nd4spd ( 600+ rwhp ) has a plug and play in his and ran at Motorvation with it.

Fabs V Spec dumped his Power FC for one and I'm sure Steve can fill in the blanks...

Cheers

Ken

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Will have a look at that. I cant see any leaks 
    • Put another overflow bottle (ie, a 1.25 coke bottle or similar) under the overflow hose and see if it is being pushed out there or if it is disappearing into the engine.
    • Staring on a stand is no issue. You just have to wire everything up, give it fuel and cross your fingers that the stand is robust enough. Arranging the inlet plumbing is often the hardest part, without any surrounding structure to hand some of it from. No need for coolant if you only want to run it for <1 minute. As to the gearbox - I think the little Aisin box is a bit stronger than the other small Nissan boxes that went behind SRs, but I wouldn't be too keen to test its limits with the torque of a boosted 25. I don't know if you can retain the box and the tailshaft. The box won't connect to the RB without an adapter of some sort, which is either a plate that will push the engine forward (which is not good for fitting it into the bay's available space) or push the box back, which messes with the box position and tailshaft length - OR - cut and shut work on the bellhousing, which is a long way from "least modification". I'd be buying a new 370Z 6 speed or similar, doing what has to be done to that to make it fit RB (ie, cut and shut bellhousing) and the requisite tailshaft custom/mods.
    • Hi Everyone I am from West Pennant Hills in NSW. Been too busy until recently to attend to my RB25DET Series 2 engine until recently. I am planning to stick it into the S15 shell at this stage, unless a nice SR20DET turns up... For now, i am going to try and get the RB25 running and working well then decide what gearbox to use. My preference is to retain the SR20DET  6 speed gearbox and tail shaft to retain as much and least modifications as i can avoid. I am an old guy and won't be doing any heavy drifting so i don't need a bullet proof gearbox Does anyone have experience with starting the RB on a stand? I got everything setup as much as I can with the info i can find... endless searching and videos on Youtube I would be great to get some pointers Cheers Songo
    • Hey all, Recently have had my s1 r33 gtr serviced and noticed my coolant reservoir was topped up to the max line. Took the car out for 1 yesterday and noticed today the reservoir is completely empty.  Any ideas? Radiator is full
×
×
  • Create New...