Jump to content
SAU Community

Recommended Posts

Im going to be honest and say I dont see many P-Platers round where I live. However that being said, I think the attitude towards driving in WA in general is piss poor. I mean seriously, I saw a van almost get cleaned up by huge truck which ran the red lights. If the whole attitude doesnt change then I guess the safer drivers just need to be more careful.

what is the fine???? ive seen a ferrari with red P plates. YES he was baiting all the other P platers to race, I very much doubt it was P plater behind the wheel just an adult looking for some fun.

Turns out my mate (who was telling me all this) is dead wrong. Fine for wearing P plates when your on your opens is 80 bucks, fine for not displaying plates is 160 bucks and 2 points in QLD

Im going to be honest and say I dont see many P-Platers round where I live. However that being said, I think the attitude towards driving in WA in general is piss poor. I mean seriously, I saw a van almost get cleaned up by huge truck which ran the red lights. If the whole attitude doesnt change then I guess the safer drivers just need to be more careful.

Yup, I agree with you of drivers attitudes in WA.

For me, it is especially in merging lanes ( I always signal for a long long time before doing this). I've seen once, right in front of me, of 2 cars trying to get in front of each other. :rofl:

Edited by Victor.T

LOL i thought of this topic this morning driving from bris to the gc and back.... I see this ute loaded up with stuff weaving in a out of morning traffic at about 20km/hr over the speed limit...as he drives past me i looked and its a p-plater on the phone (texting)whilst driving like a total dick..... then i see another guy swerving all over the lane in front of me as i went past i look over and here some asian guy reading a book whilst driving WTF. Not everone else on the rd was an angel but these two just blue my mind lol

Its the actions of ppl like this that spoil it for the good ones

Edited by sinistagtst

I'm on my red P plates too, and driving in my daily coz I prefer to leave my R in shed at home. I was doing the speed limit, and some old flamin mongrel his 4WD was tailgating me for bout 4km we both had at that the lights, I wanted to go and confront him and say why the f**k you tailgating me before the only thing stop me was the police car across the road.

Also had an employee move a car from outside our driveway (quiet little industrial area too) into the workshop and got fined for not wearing a seatbelt. Stories aside, I strongly advise taking every precaution you can to avoid getting screwed over. I don't care about the breaking the law part, just don't want you to get picked on, because it's an easy target for a cop with a chip on his shoulder.

Thanks for the words mate, made me feel a little better after a rather dead day.

What happened to the guy in the ute is ridiculous.. and only 30 minutes ago did I drive from my normal car spot to the underground carpark to avoid the hail without a seat belt (it was a 30m drive, too, but across a public road).

Where P platers get screwed is that the fine for not displaying P plates is equivalent to that of running a red light. I 100% disagree with demerit point fines for this and can't for the life of me work out why it is deemed so dangerous that people are unaware you are a P plater anyway...

I've had a cop push for it, but I kept at the point that I've lost six p-plates by displaying it the way he told me and kept telling him I've tried to keep it on.

When he said cable ties, I was honest that I never thought about it and I'll do it as soon as I got home. He started the whole thing as a total ass, and was trying to ping me for everything, then he kind of backed off and was beign a little nicer by the end.

He's like "I don't know if you know, but a lot of people like to do burnouts in this sort of car. Now I'm not saying you do..."

Made me laugh. Must be illegal to make a light hearted claim that someone does burnouts, because he was very VERY quick to try cover himself with the last bit ...

what is the fine???? ive seen a ferrari with red P plates. YES he was baiting all the other P platers to race, I very much doubt it was P plater behind the wheel just an adult looking for some fun.

There was a legit ferrari driver in p-plates. Over-loving parents with deep pockets I heard.

If the whole attitude doesnt change then I guess the safer drivers just need to be more careful.

Dude, you're totally right.

it's what I've been saying for ages.

You can take turbos and V8s from p-platers, but you'll never take the hoon out of them. That's something they've got to do them self in their own mind...

Even then, the general mentality around driving is really poor in general. Sooo many stupid things people do.

I'll admit to texting while I drive and changing the song... but I'm not serving over the road and it's almost always whilst stopped in traffic.

please do not sit 10km under the speed limit......stick to the speed limit it is there for a reason

also the other day we pulled up behind some guy in a merc at the lights. lights go green we sit there for about 5 seconds beep the horn and he finnaly wakes up from texting. next lights same thing happens, then again at the third light, but this time i held the horn for like 5 seconds before he moves. the worse thing is that most of the lights only stayed green for about 7-10 seconds so because of him a line of people had to wait an extra 3 mins at the lights. why be such a wanker in your +100K convertible merc and so inconsiderate

end rant :D

hey dude you not the only person that gets that i'm on my green P's and ever since, when talking to guys

about what I drive i get the hoon, I use to drive a laser and ever got it even with an exhaust that was cut out under

my drive seat..its weird

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Pressure when IDLING, is meant to be 51PSi... So that amperage value needs to go up a fair chunk... I'd personally be factoring for more like 12amp at least on those runs, and at that point you need to hope the already there wiring doesn't drop you a volt or two, as that's a lot of fuel pressure flow drop off from 13.5 to 12V! Taking idle pressure of 51psi, means the pump will be drawing a MINIMUM of 9amps all the time based on your reading of the graph (3bar base, then allowing an extra 0.5bar for boost = roughly 51psi)
    • Hi all,  I am in the market for an R200 longnose diff out of a Z31 300ZX, or S12 RSX, DR30 skyline, or similar, in a 3.9 ratio.  Preferably a late model one with the M12 crownwheel bolts.  The only easy to find advert for one of these was my ad back in 2007 when I sold it on this forum.  I sold the diff as I had sold the car it goes to, but as it turns out, after 18 years I got the car back late last year, so now I'm looking for the diff !  If anyone knows where to find a longnose R200 LSD with the M12 crownwheel bolts, drop me a line at [email protected] - Bonus paid if soomeone comes up with the original diff (stranger things have happened !).  Cheers   Ben D    
    • Hi everyone, I used to post here a bit from 2004-2013, when I owned various Nissans, in particular my S12 RSX gazelle, which was sold in 2007.  As luck would have it, after an 18 year hiatus, the car found its way back to me last year, and over the past 11 months I have had the pleasure of restoring it with my kids.  One thing that I am after in particular is a 3.9 ratio R200 LSD for it.  I actually sold the one out of the car here back in 2007 , and it would be incredible if I could track down who I sold it to, so I can see how they have progressed over the years (and to be honest, to see whether I can get the diff back !).  Anyways, hi all and let me know "where are the R200 Longnose diffs all at these days ?  Cheers Ben D  
    • Arms will be the same as the G35 or 350Z, but as above, there was a change in the lower control arm where it connects to the ball joint.  That said, you can remove the ball joint cone from your old ball joints and fit them to the new ball joints.  To be honest, I didn't think the ball joints themselves were different. The main ball joint is a bit awkward to replace, you really need to remove the steering knuckle to press out the old one.  Some people have used tools to remove it in place, but it just seemed too hard to get to. If you are going to press out/in that ball joint, then you may as well just replace the bushings in the LCA and the compression rod.  You can buy the compression rod bushing from Nissan, but the LCA bushes, you will need to go aftermarket. Much cheaper than buying the whole arm.
    • Ha, well, it's been.... a bit of a journey. Things have taken much longer than I'd hoped. I'll probably put up a thread at some stage. Hopefully soon. The car's not done any kms since my update in June though, put it that way.
×
×
  • Create New...