Jump to content
SAU Community

Recommended Posts

Drag Combat

April 10th at Kwinana Motorplex

There is a round of Drag Combat being held in Perth on the 10th of Arpil and SAUWA is looking for people interested in entering as a team. Skylines Australia is supporting the event with advertising and teams are entering around the country with the 1st round having been completed in NSW at the WSID (Western Sydney International Dragway).

You don't need to have a 10sec car to be able to compete, aslong as it's able to do a 14.99 pass or better then your eligible. We're not restricting it to just Skylines either, any Jap Import owner who is a SAU forum member is more than welcome to join us, and I believe cars with engine translplants are eligible aslong as the engine is from the same manufacturer.

There are prizes to win, and the event will be shown on FOX SPORTS, so if you have sponsorship this may be a good way to get some exposure. There are different categories of racing, including a category for street tyres. Further details can be found at www.dragcombat.com .

There will be a Show'n'Shine and SPL comp, but if you just want to race then you don't have to enter them:D

I'm talking to the organiser to get a discount for SAUWA entrants, and will let you know ASAP what the discounted rate will be.

Please register your interest, and support this event.

Paul

President of SAUWA

Entrant List:

GTS-t VSPEC - R33 GTS-t

SHUTO BOY - R33 GTS-t

DSTURBD - R31

RB20LAGWAGON - R31

ROB77 - R33 GTS-t

REP003 - R33 GTS-t

Link to comment
https://www.sau.com.au/forums/topic/34755-drag-combat-1004-who-wants-to-enter/
Share on other sites

  • Replies 109
  • Created
  • Last Reply

Top Posters In This Topic

haha. wikkid aidwin.

wing 55 - unholy dragstip warrior.

I will probably not be in on this one, due to the fact that my car is slow, and my wallet empty, thereby precluding any change from the current scenario of car slowness.

:)

but I will be there - and may spl it up if required.

Sean, We have a few decent cars, may even have an 8sec GTR making an appearance, but have to wait to hear back:D

Once we've confirmed some more people, then we'll get together to discuss what brackets, dial in's and tyres we can use. We can always have a couple sets of slicks that we share between some cars.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The oil pressure sensor for logging, does it happen to be the one that was slowly breaking out of the oil block? If it is,I would be ignoring your logs. You had a leak at the sensor which would mean it can't read accurately. It's a small hole at the sensor, and you had a small hole just before it, meaning you could have lost significant pressure reading.   As for brakes, if it's just fluid getting old, you won't necessarily end up with air sitting in the line. Bleed a shit tonne of fluid through so you effectively replace it and go again. Oh and, pay close attention to the pressure gauge while on track!
    • I don't know it is due to that. It could just be due to load on track being more than a dyno. But it would be nice to rule it out. We're talking a fraction of a second of pulling ~1 degree of timing. So it's not a lot, but I'd rather it be 0... Thicker oil isn't really a "bandaid" if it's oil that is going to run at 125C, is it? It will be thicker at 100 and thus at 125, where the 40 weight may not be as thick as one may like for that use. I already have a big pump that has been ported. They (They in this instance being the guy that built my heads) port them so they flow more at lower RPM but have a bypass spring that I believe is ~70psi. I have seen 70psi of oil pressure up top in the past, before I knew I had this leak. I have a 25 row oil cooler that takes up all the space in the driver side guard. It is interesting that GM themselves recommend 0-30 oil for their Vette applications. Unless you take it to the track where the official word is to put 20-50w oil in there, then take that back out after your track day is done and return to 0-30.
    • Nice, looks great. Nice work getting the factory parts also. Never know when you'll need them.
    • Thanks @jtha7 I will have a look around tomorrow but it is a prick of a spot. These are some photos i tried taking 
    • I take it that the knock retard is from bearings tapping a little tune? Thicker oil is a fragile bandaid. You need a much bigger oil cooler and probably the bigger pump being discussed.
×
×
  • Create New...