Jump to content
SAU Community

Recommended Posts

yeah I like the RSR too. have admittedly only used them once. but i was really surprised buy the dunlop Z1*. I currently have AD07s on one car, Ad08s on another (both GTRs), RT615s on another and the Z1* on the evo and I reckon of those four the Z1* is the better tyre. their UTQG is a bit higher than others but remember UTQG is not an outright indication of grip or compound. it's simply a treadwear rating. so it tells you about how long the tyre lasts. yes generally a lower number means a softer more grippy tyre but don't get too hung up on it as a pure indication of grip as that's not what it is.

That Dunlop has been tested in Tassie by a circuit racer, and he found them to be only about 1sec a lap slower than Medium DZ03's. He said it was only initial turn in where they didn't match proper R's

That Dunlop has been tested in Tassie by a circuit racer, and he found them to be only about 1sec a lap slower than Medium DZ03's. He said it was only initial turn in where they didn't match proper R's

cheers for that sav-man. I would have guessed that to be about right. they are amazing for a road tyre. I'm going to put them on all my road cars from now on I think.

yeah fk me dead tyre rack is cheap. give me a reach around and i'll buy you a set too! no way would I go back to ku36 and in fact I reckon the Z1* against an R888 would be interesting. on light cars the R888 might have the edge but we know they suffer on heavy stuff where as the Z1* seem to be good as gold. i rate 'em.

lol high roller... It's called tirerack.com :P

have bought from them before? approx how much is shipping to Aus? (I tried to get shipping quote but it wanted ZIP code)

my KU36 are almost dead so might try the Z1... I mean if Baron rates them how can I say no :kiss:

I've not, but most of my close mates have recently. Around 300-400 USD delivered for shipping.

So for instance you can get AD08s here for like 1400-1500 landed (265/18s). Depending if you get tax stung, and exchange rate etc.

You'll be paying 2200-2400 IIRC locally. It's a no brainer. Bridgestones you save even more on as markup here is offensive.

Not worth it for cheap tyresm but expensive road tyres/semi comps, cannot be beaten.

Infact semis (048s) and the hi-perf street AD08s are basically the same price delivered lol :D

I've not, but most of my close mates have recently. Around 300-400 USD delivered for shipping.

So for instance you can get AD08s here for like 1400-1500 landed (265/18s). Depending if you get tax stung, and exchange rate etc.

You'll be paying 2200-2400 IIRC locally. It's a no brainer. Bridgestones you save even more on as markup here is offensive.

Not worth it for cheap tyresm but expensive road tyres/semi comps, cannot be beaten.

Infact semis (048s) and the hi-perf street AD08s are basically the same price delivered lol :D

cheers, just found the tirerack thread... I've got a few months left on the KU36 but might get Z1 now while exchange rate is good

How do they compare noise-wise?

pretty good. the big difference i noticed on street vs semis (A050, A048 etc) is that the Z1s don't tramline like the semi's do. real semis on the street on poor roads tramline so badly they just about rip the wheel from your hand at times. The z1's obviously a bit more noisy than comfort spec road tyres but still very liveable unlike semi's.

but yeah from tirerack they are cheap cheap.

How do you guys go getting tyres in from OS ?

Aren't customs super keen on fumigation if they don't come on wheels or something ?

What's the go ?

Mate of mine is interested in some Semi's for his race car.

If they're new you shouldn't have any issues with customs.

pretty good. the big difference i noticed on street vs semis (A050, A048 etc) is that the Z1s don't tramline like the semi's do. real semis on the street on poor roads tramline so badly they just about rip the wheel from your hand at times. The z1's obviously a bit more noisy than comfort spec road tyres but still very liveable unlike semi's.

but yeah from tirerack they are cheap cheap.

On sydney roads it would be even worse! :P

speaking of tyres,

Yokohama are telling me the latest size A050 semi slick that would have been good for my car (295/35-18) is not available as the mold for this size (and a few others?) was damaged with the earthquake.

biggest semis other than the bridgestones are 295/30-18 (hankook vetnis Z221 and A050's), that diameter is about 80mm less than the standard wheel size on my car.

I wish there were some bigger smei slick options so we could match it with the EVO's

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yes. Probably, given that there is only access from the bottom end of it, go with a drill bit. Don't start too small. 7 or 8mm is probably the right size. You want something that can make a big enough hole to do some damage, but not so bit that it clashes with the steel or binds up and breaks your wrist. A slow speed is probably a good idea too. Once the rubber is destroyed, you then have to get the crush tube off the stud, which will be the whole heat/oil/cutting exercise all over again, but this time with the need to strictly avoid damaging the stud (any further than the corrosion might already have done.
    • We replaced the connector just because we could and it was still there, once we swapped the injectors around it stopped. The injectors were something I had thoughts of replacing even before I first started the engine and in hindsight I should have 
    • Not too sure just yet, want to have a go at doing what I can myself, but to start with want someone to cast their eye over it tell me what needs doing to get it running and back on the road, so anyone with great overall knowledge would be ideal.
    • I personally would go with cutting out the rubber. Then deal with getting sleeve off separately. Rubber can be painful to cut, it loves to jam up cutting tools. I normally have success with drill bits, deburr bits, angle grinders, jigsaw, reciprocating saw, and never forget... fire. Obviously different tools won't work in all locations you're trying to work with, and you need to be comfortable with each. You personally may be happy slowly slicing it out with a razor blade, if you are, go for it with one too! Feel free to wait for others to weigh in also on their thoughts.
    • So ... I got everything disconnected and started dropping the frame. Three of the four mounts started to come down but the fourth one (the one with the nut that gave me all the trouble) won't budge. The inner metal sleeve stays up tight against the chassis rail although the outer part of the mount drops a bit (and can be levered quite a lot more) but it's just stretching the rubber bushing. So I reckon there's some serious corrosion inside the inner sleeve and holding it tight to the lug at the top of the bolt. Tried everything I can think of so far: penetrating oil, whacking the top of the sleeve to vibrate it and wedge a screwdriver blade in there. I also tried to turn the inner sleeve a bit by hitting it with a chisel at the bottom. It's stuck solid. What do you think about cutting the rubber with a blade so I can drop the subframe around it anyway. Then worry about getting the inner sleeve off after? Will that work? Is it gonna give me even more problems?
×
×
  • Create New...