Jump to content
SAU Community

Recommended Posts

Pods need to be covered. Yeah artz yours does blend in also helps your running the crossover pipe. I had mine run down becide the plenum so everything was open. My BMW build will have a front facing plenum so gate is least of my troubles. Putting jez's kando to the test tomorrow it's drift day can't wait

Wakey wakey boys.

All Geared up ready to tow to eastern creek. I borrowed a mates go pro so there should be plenty of incar footage.

I got the tacho working now so atleast we can see rpm to boost response. Dont think the car will see much below 4000 though. Maybe in and around the pits.

I didnt get time to convert the speedo drive so there is still no vct. Should have that sorted before i get onto the dyno next with a 20psi tune. Then its straight to the drags to see what time and mph she can run.

If you can hide things then great. I must be lucky as my engine bay has looked like those pics since 2003 and never booked. So if your car externally is nothing flashy and your exhaust is quiet then there is surely a good chance you will never be asked to pop the bonnet

So if your car externally is nothing flashy and your exhaust is quiet then there is surely a good chance you will never be asked to pop the bonnet

I have more or less gotten away with murder also when my cars have not been overly loud and have had respectable rims on them etc.

Cheap looking oversize rims and very loud exhausts will get u screwed regarless of how normal your car is. A well kept respectable car will go unnoticed in terms of them being total pricks. Then again it depends what your caught for too.

I love this thread. I wish I had another 6 so I can run a Kando... I think im better off with a stock position turbo on the SR though, good work to all the guys with nice Kandos on their RBs.

Zeeb I have an LS if you are looking, VT2 clubsport kitup with box etc.

Some of you have me on FB, youve seen my photos. Car is mostly done, not going back now :P SR all the way.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Some troubleshooting, connect up a timing light/gun with a proper ignition lead on coil 1. Hold the revs at 4~4500rpm and see if your timing is all over the shop, scattering off its tits. If so, there's a high chance your CAS is fked. But I read you have a Link ECU ready to go in, why not just skip all this and put that in - will make troubleshooting so much easier.  
    • Misfires when the car is fully warm are generally attributed to the coils (and/or the igniter, on cars with a separate igniter). They can stop working properly when they get hot for a number of reasons. Either electric/electronic, or from thermal expansion opening up gaps and allowing HV leakage. Seeing as you have replaced the coils, that could/should rule them out. But I wouldn't always assume so. Were the coils genuine? Or is there a chance you have bought some counterfeit Chinesium shit? Then we're back onto loom connections. They can fail when warm/hot for the same reasons. Inspections, cleaning of contact surfaces, ensuring that terminals are fully inserted, etc etc, are all justified. The same (heat effects) holds true for the other electrics and their connectors. AFM & CAS, primarily. If you try that Chinesium AFM, drive it around on low load until it is properly hot, but do'nt give it more load than you have to, except when you need to see if it will still miss. I'm dead serious about the untrustworthiness of the calibration of those copy AFMs. Injectors are unlikely to get hot unless the fuel is coming back around hot. You could try squirting them with compressed air or freeze spray to cool them back down to see if they are maybe the cause.
    • Alright, all the plugs looks good. Noticed that it starts to get bad when the car is up to temp, that's when things starts to misfire hard. next to do is Injector cleaning and such. Got in touch with a shop to do work on the injectors next Monday also help on diagnosis.
    • House of Fatz dry dock needs a clean sadly one of the long time stables is leaving this weekend   see ya mr purple
    • Hence why I've only modified my car into a pure daily. Everything has to remain reliable & roadworthy, while providing value and grin factor. It also must not be handcrafted to the extent that the car will be immovable if something breaks because you cannot get or make a replacement to at least limp around with.
×
×
  • Create New...