Jump to content
SAU Community

Recommended Posts

Every day bro, usually at 7am is the best because it's nice and cool and you might be able to slip the tuner cash before the boss comes in so it will be cheaper.

No but in all seriousness, if you don't plan on modifying the car then I would generally say.. Never, for example I have an R34 GTT which was stock for about a year.. Then I upgraded the ecu to an Apexi PFC, intercooler, coilpacks,zorst, upped the stock boost, this required a tune which I have now been driving on for about 3 months.

Basically I would only expect to need another tune if;

A - Something went wrong

B - I decided to upgrade something else (injectors, bigger turbo etc)

C - I decided that the first tune was pussy and I could of stressed the engine another 10hp (which I wouldn't do as I like my safe tune)

Hope this helps, I suppose the other thing to note is if you buy a car which already has an aftermarket ecu then the only thing you would need to question is who tuned it and how good was the tune, and also has anything happened between the last tune and you buying the car.

Cheers,

Steve

Once a car is tuned correctly, than that is it.

It is only when you change something major that you will need a retune.

Yup,

Even when major services are done (according to Nissan) at 40,000 80,000, 100,000 140,000 180,000 200,000 you don't need a retune unless you've done a performance upgrade.

Even changing plugs or coilpacks does not mean that a retune needs to be done.

thanks guys, i wasn't sure, i used to work near RX engineering and the same cars would be back on the dyno every couple of weeks, i wasn't to keen to be doin that. glad its not the case. :)

Power hungry doods with too much money. ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi all, Long time since I've posted here. Looking for some advice on what I can remove to further identify the cause of my issues.  I can move the passenger seat forward and back but the knob used to adjust the seat angle is pretty much free spinning, there's very little resistance.  Removing the side cover I can see that the chain is intact but the shaft for the adjustment spins without the gear attached to it moving.  What's my next step for disassembly here? Is this a common fault? Just being a little cautious as I didn't want to start removing bolts for a spring to fly out or something equally as stupid.  Cheers
    • Those above shitboxes, mediocre and above usually have a turbo strapped to them, hence the slightly higher octane is required.  
    • Hi all,   long time listener, first time caller   i was wondering if anyone can help me identify a transistor on the climate control unit board that decided to fry itself   I've circled it in the attached photo   any help would be appreciated
    • I mean, I got two VASS engineers to refuse to cert my own coilovers stating those very laws. Appendix B makes it pretty clear what it considers 'Variable Suspension' to be. In my lived experience they can't certify something that isn't actually in the list as something that requires certification. In the VASS engineering checklist they have to complete (LS3/NCOP11) and sign on there is nothing there. All the references inside NCOP11 state that if it's variable by the driver that height needs to maintain 100mm while the car is in motion. It states the car is lowered lowering blocks and other types of things are acceptable. Dialling out a shock is about as 'user adjustable' as changing any other suspension component lol. I wanted to have it signed off to dissuade HWP and RWC testers to state the suspension is legal to avoid having this discussion with them. The real problem is that Police and RWC/Pink/Blue slip people will say it needs engineering, and the engineers will state it doesn't need engineering. It is hugely irritating when aforementioned people get all "i know the rules mate feck off" when they don't, and the actual engineers are pleasant as all hell and do know the rules. Cars failing RWC for things that aren't listed in the RWC requirements is another thing here entirely!
    • I don't. I mean, mine's not a GTR, but it is a 32 with a lot of GTR stuff on it. But regardless, I typically buy from local suppliers. Getting stuff from Japan is seldom worth the pain. Buying from RHDJapan usually ends up in the final total of your basket being about double what you thought it would be, after all the bullshit fees and such are added on.
×
×
  • Create New...