Jump to content
SAU Community

Recommended Posts

Hey Ppls,

Previously I thought the extra throttle body type device was a traction control thing which shut when wheelspin was evident.

I have since been told that this is actually a Variable Intake Flow thingo which acts to increase airflow speed at low rpm by closing like a normal throttle body, and then opening up at high rpm to give bulk airflow.

Now, PowerFCs are suppose to control all features of the engine management, and I would assume that this is a very important part of the Neo 6 engine.

To those who know, does the R-34 PowerFC allow you to control the activity of this throttle body device........??

I would assume that you could adjust this similar to the way you can with the NVCS.

Having said that though, it might have a link to TPS in order to give the best results depending on a lot of other variables......

Anybody with any experience??

Cheers

BASS OUT

Link to comment
https://www.sau.com.au/forums/topic/34851-r34-neo-straight-6-power-fc-question/
Share on other sites

Are you talking about the bit that sits across the inside of the plenum? it's open at low revs, then closes at high revs...speeds up the flow of air at high RPM. If you disconnect it you'll notice the car runs like a dog from about 3200-5000ish,then picks up in the last bit of the range.

Yep, that's the bit.

Any definent answers??

when I disconnected the plug to it last night, the Engine Warning light came and on the Slip/TCS off light lit up and I took it for a drive.

I didn't really notice a lot of difference but the car was cold and I couldn't really give it a good thrashing.

Guest RedLineGTR

The thing that is in front of the throttle body, is for the Traction Control System :D its what limits your revs when u are wheels spinning from the line, hence if you try to launch with the TCS on then you bog down quite bad. Hope it answers you question.

Guest RedLineGTR

The Power Fc will control everything the same as in other skylines (in one way or another) the Neo engine is tuned for more power (more R&D) over the past models. The TCS Has a Seperate ECU for what it does and u cant change any items of how it behaves with the power fc nor do i know any companys that have Tuned it in one way or another.

Guest RedLineGTR

I hope this is what u mean by your question. When the TCS is activated it is activated and if the car starts to slip highly then it kicks in just like i throttle body, like if you are on the pedal to the floor the TCS can ajust its throttle and limit your revs. If the system is off then the air flows how its meant to without any interuption.

My experience with the traction control is as follows.

Going around slight corners and nailing it, the car will pull lose power and then accelerate once grip is gained again.

But in the wet the car will drop spark and the engine will 'strobe' (for want of a better word) for a second and then accelerate, at which point traction will be lost again, and then it will strobe again.

I think maybe in moderate losses of traction, the blade might close, butin big ones it drops sparky and really pulles the reigns in.

If it only works for traction control, I wonder it there is any merit in using it as a variable intake diameter type device????

What makes you think it "drops sparky"? It just closes the valve completely starving the engine of air and probably cuts the fuel at the same time. If you cut spark it would backfire when you gave it back.

At it's most basic it just cuts power so you can get traction back and if you keep your foot down then it will spin the wheels again, thus restarting the whole process.

Abo Bob.

The sound it makes it identical to the sound that my car makes when misfiring on plugs that haven't been gapped properly.

That's why i made the assumption.

But I have been wrong before!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...